From: Jacky Chou <jacky_chou@aspeedtech.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: "Simon Horman" <horms@kernel.org>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Po-Yu Chuang" <ratbert@faraday-tech.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, taoren@meta.com,
bmc-sw2@aspeedtech.com
Subject: [net-next v2 0/4] Add AST2600 RGMII delay into ftgmac100
Date: Wed, 13 Aug 2025 14:32:57 +0800 [thread overview]
Message-ID: <20250813063301.338851-1-jacky_chou@aspeedtech.com> (raw)
This patch series adds support for configuring RGMII internal delays for the
Aspeed AST2600 FTGMAC100 Ethernet MACs. It introduces new compatible strings to
distinguish between MAC0/1 and MAC2/3, as their delay chains and configuration
units differ.
The device tree bindings are updated to restrict the allowed phy-mode and delay
properties for each MAC type. Corresponding changes are made to the device tree
source files and the FTGMAC100 driver to support the new delay configuration.
Summary of changes:
- dt-bindings: net: ftgmac100: Add conditional schema for AST2600 MAC0/1 and
MAC2/3, restrict phy-mode and delay properties, and require SCU phandle.
- ARM: dts: aspeed-g6: Add ethernet aliases, update MAC compatibles, and add
SCU phandle for delay configuration.
- ARM: dts: aspeed-ast2600-evb: Add rx/tx-internal-delay-ps properties and
update phy-mode for MACs.
- net: ftgmac100: Add driver support for configuring RGMII delay for AST2600
MACs via SCU.
This enables precise RGMII timing configuration for AST2600-based platforms,
improving interoperability with various PHYs.
Jacky Chou (4):
dt-bindings: net: ftgmac100: Restrict phy-mode and delay properties
for AST2600
ARM: dts: aspeed-g6: Add ethernet alise and update MAC compatible
ARM: dts: aspeed: ast2600evb: Add delay setting for MAC
net: ftgmac100: Add RGMII delay configuration for AST2600
.../bindings/net/faraday,ftgmac100.yaml | 50 ++++++++++-
.../boot/dts/aspeed/aspeed-ast2600-evb.dts | 16 +++-
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 24 +++++-
drivers/net/ethernet/faraday/ftgmac100.c | 86 +++++++++++++++++++
drivers/net/ethernet/faraday/ftgmac100.h | 12 +++
5 files changed, 179 insertions(+), 9 deletions(-)
---
v2:
- added new compatible strings for MAC0/1 and MAC2/3
- updated device tree bindings to restrict phy-mode and delay properties
- refactored driver code to handle rgmii delay configuration
---
--
2.43.0
next reply other threads:[~2025-08-13 6:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-13 6:32 Jacky Chou [this message]
2025-08-13 6:32 ` [net-next v2 1/4] dt-bindings: net: ftgmac100: Restrict phy-mode and delay properties for AST2600 Jacky Chou
2025-08-15 18:12 ` Andrew Lunn
2025-08-13 6:32 ` [net-next v2 2/4] ARM: dts: aspeed-g6: Add ethernet alise and update MAC compatible Jacky Chou
2025-08-13 6:33 ` [net-next v2 3/4] ARM: dts: aspeed: ast2600evb: Add delay setting for MAC Jacky Chou
2025-08-15 18:17 ` Andrew Lunn
2025-08-13 6:33 ` [net-next v2 4/4] net: ftgmac100: Add RGMII delay configuration for AST2600 Jacky Chou
2025-08-15 18:23 ` Andrew Lunn
2025-08-15 0:44 ` [net-next v2 0/4] Add AST2600 RGMII delay into ftgmac100 Jakub Kicinski
2025-08-15 18:42 ` Andrew Lunn
2025-08-20 0:40 ` 回覆: " Jacky Chou
2025-08-20 2:43 ` Andrew Lunn
2025-08-20 6:09 ` 回覆: " Jacky Chou
2025-08-26 1:41 ` Jacky Chou
2025-08-26 3:17 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250813063301.338851-1-jacky_chou@aspeedtech.com \
--to=jacky_chou@aspeedtech.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@codeconstruct.com.au \
--cc=bmc-sw2@aspeedtech.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ratbert@faraday-tech.com \
--cc=robh@kernel.org \
--cc=taoren@meta.com \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®