[PATCH 11/16] serial: 8250_omap: extract omap_8250_set_termios_atomic()

["Jiri Slaby (SUSE)" <jirislaby@kernel.org>]

To use guard()s easily in omap_8250_set_termios(), split it into atomic
and non-atomic part. The former can be easily guarded -- without a need
of indenting or moving code.

omap_8250_set_termios() would likely profit from a cleanup similar to
one in serial8250_do_set_termios() in commit cdc4a3e0b235 ("serial:
8250: extract serial8250_set_fcr()") and earlier.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
---
 drivers/tty/serial/8250/8250_omap.c | 39 ++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 6707f55bdbe7..ba03955fdc6e 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -369,18 +369,12 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 		serial8250_em485_stop_tx(up, true);
 }
 
-/*
- * OMAP can use "CLK / (16 or 13) / div" for baud rate. And then we have have
- * some differences in how we want to handle flow control.
- */
-static void omap_8250_set_termios(struct uart_port *port,
-				  struct ktermios *termios,
-				  const struct ktermios *old)
+static void omap_8250_set_termios_atomic(struct uart_port *port, struct ktermios *termios,
+					 const struct ktermios *old, unsigned int baud)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct omap8250_priv *priv = port->private_data;
-	unsigned char cval = 0;
-	unsigned int baud;
+	u8 cval;
 
 	cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
 
@@ -393,12 +387,6 @@ static void omap_8250_set_termios(struct uart_port *port,
 	if (termios->c_cflag & CMSPAR)
 		cval |= UART_LCR_SPAR;
 
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old,
-				  port->uartclk / 16 / UART_DIV_MAX,
-				  port->uartclk / 13);
 	omap_8250_get_divisor(port, baud, priv);
 
 	/*
@@ -518,6 +506,27 @@ static void omap_8250_set_termios(struct uart_port *port,
 	uart_port_unlock_irq(&up->port);
 	pm_runtime_mark_last_busy(port->dev);
 	pm_runtime_put_autosuspend(port->dev);
+}
+
+/*
+ * OMAP can use "CLK / (16 or 13) / div" for baud rate. And then we have have
+ * some differences in how we want to handle flow control.
+ */
+static void omap_8250_set_termios(struct uart_port *port,
+				  struct ktermios *termios,
+				  const struct ktermios *old)
+{
+	struct omap8250_priv *priv = port->private_data;
+	unsigned int baud;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old,
+				  port->uartclk / 16 / UART_DIV_MAX,
+				  port->uartclk / 13);
+
+	omap_8250_set_termios_atomic(port, termios, old, baud);
 
 	/* calculate wakeup latency constraint */
 	priv->calc_latency = USEC_PER_SEC * 64 * 8 / baud;
-- 
2.50.1