From: Vikram Sharma <quic_vikramsa@quicinc.com>
To: <rfoss@kernel.org>, <todor.too@gmail.com>,
<bryan.odonoghue@linaro.org>, <mchehab@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<andersson@kernel.org>, <konradybcio@kernel.org>,
<hverkuil-cisco@xs4all.nl>, <cros-qcom-dts-watchers@chromium.org>,
<catalin.marinas@arm.com>, <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<quic_svankada@quicinc.com>, <quic_vikramsa@quicinc.com>,
<linux-media@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Wenmeng Liu <quic_wenmliu@quicinc.com>
Subject: [PATCH v5 7/9] media: qcom: camss: Add support for VFE 690
Date: Thu, 14 Aug 2025 15:46:13 +0530 [thread overview]
Message-ID: <20250814101615.1102795-8-quic_vikramsa@quicinc.com> (raw)
In-Reply-To: <20250814101615.1102795-1-quic_vikramsa@quicinc.com>
Add support for VFE 690 found on lemans(SA8775P). This is
different from vfe 780 w.r.t few register offsets. It
supports two full and five lite VFE.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../platform/qcom/camss/camss-vfe-gen3.c | 67 +++++--
drivers/media/platform/qcom/camss/camss-vfe.c | 5 +-
drivers/media/platform/qcom/camss/camss.c | 174 ++++++++++++++++++
3 files changed, 228 insertions(+), 18 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-gen3.c b/drivers/media/platform/qcom/camss/camss-vfe-gen3.c
index 93d16b0951e9..f2001140ead1 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-gen3.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-gen3.c
@@ -12,13 +12,43 @@
#include "camss.h"
#include "camss-vfe.h"
-#define BUS_REG_BASE (vfe_is_lite(vfe) ? 0x200 : 0xC00)
+#define IS_VFE_690(vfe) \
+ (vfe->camss->res->version == CAMSS_8775P)
+
+#define BUS_REG_BASE_690 \
+ (vfe_is_lite(vfe) ? 0x480 : 0x400)
+#define BUS_REG_BASE_780 \
+ (vfe_is_lite(vfe) ? 0x200 : 0xC00)
+#define BUS_REG_BASE \
+ (IS_VFE_690(vfe) ? BUS_REG_BASE_690 : BUS_REG_BASE_780)
+
+#define VFE_TOP_CORE_CFG (0x24)
+#define VFE_DISABLE_DSCALING_DS4 BIT(21)
+#define VFE_DISABLE_DSCALING_DS16 BIT(22)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL_690 (BUS_REG_BASE + 0xFC)
+#define VFE_BUS_WM_TEST_BUS_CTRL_780 (BUS_REG_BASE + 0xDC)
+#define VFE_BUS_WM_TEST_BUS_CTRL \
+ (IS_VFE_690(vfe) ? VFE_BUS_WM_TEST_BUS_CTRL_690 \
+ : VFE_BUS_WM_TEST_BUS_CTRL_780)
+/*
+ * Bus client mapping:
+ *
+ * Full VFE:
+ * VFE_690: 16 = RDI0, 17 = RDI1, 18 = RDI2
+ * VFE_780: 23 = RDI0, 24 = RDI1, 25 = RDI2
+ *
+ * VFE LITE:
+ * VFE_690 : 0 = RDI0, 1 = RDI1, 2 = RDI2, 3 = RDI3, 4 = RDI4, 5 = RDI5
+ * VFE_780 : 0 = RDI0, 1 = RDI1, 2 = RDI2, 3 = RDI3, 4 = RDI4
+ */
+#define RDI_WM_690(n) ((vfe_is_lite(vfe) ? 0x0 : 0x10) + (n))
+#define RDI_WM_780(n) ((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
+#define RDI_WM(n) (IS_VFE_690(vfe) ? RDI_WM_690(n) : RDI_WM_780(n))
#define VFE_BUS_WM_CGC_OVERRIDE (BUS_REG_BASE + 0x08)
#define WM_CGC_OVERRIDE_ALL (0x7FFFFFF)
-#define VFE_BUS_WM_TEST_BUS_CTRL (BUS_REG_BASE + 0xDC)
-
#define VFE_BUS_WM_CFG(n) (BUS_REG_BASE + 0x200 + (n) * 0x100)
#define WM_CFG_EN BIT(0)
#define WM_VIR_FRM_EN BIT(1)
@@ -39,17 +69,6 @@
#define VFE_BUS_WM_MMU_PREFETCH_CFG(n) (BUS_REG_BASE + 0x260 + (n) * 0x100)
#define VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(n) (BUS_REG_BASE + 0x264 + (n) * 0x100)
-/*
- * Bus client mapping:
- *
- * Full VFE:
- * 23 = RDI0, 24 = RDI1, 25 = RDI2
- *
- * VFE LITE:
- * 0 = RDI0, 1 = RDI1, 2 = RDI3, 4 = RDI4
- */
-#define RDI_WM(n) ((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
-
static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
{
struct v4l2_pix_format_mplane *pix =
@@ -62,14 +81,24 @@ static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
writel(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
- writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
- vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+ if (IS_VFE_690(vfe))
+ writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height,
+ vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+ else
+ writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
+ vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+
writel((WM_IMAGE_CFG_0_DEFAULT_WIDTH & 0xFFFF),
vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
writel(WM_IMAGE_CFG_2_DEFAULT_STRIDE,
vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
writel(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
+ /* TOP CORE CFG */
+ if (IS_VFE_690(vfe))
+ writel(VFE_DISABLE_DSCALING_DS4 | VFE_DISABLE_DSCALING_DS16,
+ vfe->base + VFE_TOP_CORE_CFG);
+
/* no dropped frames, one irq per frame */
writel(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
writel(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
@@ -92,7 +121,11 @@ static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
struct vfe_line *line)
{
wm = RDI_WM(wm);
- writel((addr >> 8) & 0xFFFFFFFF, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+
+ if (IS_VFE_690(vfe))
+ writel(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+ else
+ writel((addr >> 8), vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
dev_dbg(vfe->camss->dev, "wm:%d, image buf addr:0x%x\n",
wm, addr);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 4bca6c3abaff..99cbe09343f2 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -346,6 +346,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
case CAMSS_8280XP:
case CAMSS_845:
case CAMSS_8550:
+ case CAMSS_8775P:
case CAMSS_X1E80100:
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
@@ -910,7 +911,8 @@ static int vfe_match_clock_names(struct vfe_device *vfe,
return (!strcmp(clock->name, vfe_name) ||
!strcmp(clock->name, vfe_lite_name) ||
- !strcmp(clock->name, "vfe_lite"));
+ !strcmp(clock->name, "vfe_lite") ||
+ !strcmp(clock->name, "camnoc_axi"));
}
/*
@@ -1974,6 +1976,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
case CAMSS_8280XP:
case CAMSS_845:
case CAMSS_8550:
+ case CAMSS_8775P:
case CAMSS_X1E80100:
ret = 16;
break;
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 5f1e267045cb..08763d92f659 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -2687,6 +2687,180 @@ static const struct camss_subdev_resources csid_res_8775p[] = {
},
};
+static const struct camss_subdev_resources vfe_res_8775p[] = {
+ /* VFE0 */
+ {
+ .regulators = {},
+ .clock = { "cpas_vfe0", "vfe0", "vfe0_fast_ahb",
+ "cpas_ahb", "gcc_axi_hf",
+ "cpas_fast_ahb_clk",
+ "camnoc_axi"},
+ .clock_rate = {
+ { 0 },
+ { 480000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 },
+ { 0 },
+ { 300000000, 400000000 },
+ { 400000000 },
+ },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = false,
+ .pd_name = NULL,
+ .hw_ops = &vfe_ops_gen3,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE1 */
+ {
+ .regulators = {},
+ .clock = { "cpas_vfe1", "vfe1", "vfe1_fast_ahb",
+ "cpas_ahb", "gcc_axi_hf",
+ "cpas_fast_ahb_clk",
+ "camnoc_axi"},
+ .clock_rate = {
+ { 0 },
+ { 480000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 },
+ { 0 },
+ { 300000000, 400000000 },
+ { 400000000 },
+ },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = false,
+ .pd_name = NULL,
+ .hw_ops = &vfe_ops_gen3,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE2 (lite) */
+ {
+ .regulators = {},
+ .clock = { "cpas_vfe_lite", "vfe_lite_ahb",
+ "vfe_lite_csid", "vfe_lite_cphy_rx",
+ "vfe_lite"},
+ .clock_rate = {
+ { 0, 0, 0, 0 },
+ { 300000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 480000000, 600000000, 600000000, 600000000 },
+ },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_gen3,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE3 (lite) */
+ {
+ .regulators = {},
+ .clock = { "cpas_vfe_lite", "vfe_lite_ahb",
+ "vfe_lite_csid", "vfe_lite_cphy_rx",
+ "vfe_lite"},
+ .clock_rate = {
+ { 0, 0, 0, 0 },
+ { 300000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 480000000, 600000000, 600000000, 600000000 },
+ },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_gen3,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE4 (lite) */
+ {
+ .regulators = {},
+ .clock = { "cpas_vfe_lite", "vfe_lite_ahb",
+ "vfe_lite_csid", "vfe_lite_cphy_rx",
+ "vfe_lite"},
+ .clock_rate = {
+ { 0, 0, 0, 0 },
+ { 300000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 480000000, 600000000, 600000000, 600000000 },
+ },
+ .reg = { "vfe_lite2" },
+ .interrupt = { "vfe_lite2" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_gen3,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE5 (lite) */
+ {
+ .regulators = {},
+ .clock = { "cpas_vfe_lite", "vfe_lite_ahb",
+ "vfe_lite_csid", "vfe_lite_cphy_rx",
+ "vfe_lite"},
+ .clock_rate = {
+ { 0, 0, 0, 0 },
+ { 300000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 480000000, 600000000, 600000000, 600000000 },
+ },
+ .reg = { "vfe_lite3" },
+ .interrupt = { "vfe_lite3" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_gen3,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE6 (lite) */
+ {
+ .regulators = {},
+ .clock = { "cpas_vfe_lite", "vfe_lite_ahb",
+ "vfe_lite_csid", "vfe_lite_cphy_rx",
+ "vfe_lite"},
+ .clock_rate = {
+ { 0, 0, 0, 0 },
+ { 300000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 400000000, 400000000, 400000000, 400000000 },
+ { 480000000, 600000000, 600000000, 600000000 },
+ },
+ .reg = { "vfe_lite4" },
+ .interrupt = { "vfe_lite4" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_gen3,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+};
+
static const struct resources_icc icc_res_sa8775p[] = {
{
.name = "ahb",
--
2.25.1
next prev parent reply other threads:[~2025-08-14 10:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-14 10:16 [PATCH v5 0/9] Add lemans(sa8775p) camss support Vikram Sharma
2025-08-14 10:16 ` [PATCH v5 1/9] media: qcom: camss: Rename camss-csid-780.c to camss-csid-gen3.c Vikram Sharma
2025-08-14 10:16 ` [PATCH v5 2/9] media: qcom: camss: Rename camss-vfe-780.c to camss-vfe-gen3.c Vikram Sharma
2025-08-14 10:16 ` [PATCH v5 3/9] media: dt-bindings: Add qcom,sa8775p-camss compatible Vikram Sharma
2025-08-14 10:16 ` [PATCH v5 4/9] media: qcom: camss: " Vikram Sharma
2025-08-14 10:16 ` [PATCH v5 5/9] media: qcom: camss: Add support for CSIPHY (v1.3.0) Vikram Sharma
2025-08-14 10:16 ` [PATCH v5 6/9] media: qcom: camss: Add support for CSID 690 Vikram Sharma
2025-08-14 10:16 ` Vikram Sharma [this message]
2025-08-14 10:16 ` [PATCH v5 8/9] media: qcom: camss: Enumerate resources for lemans(sa8775p) Vikram Sharma
2025-08-14 10:16 ` [PATCH v5 9/9] arm64: dts: qcom: lemans: Add support for camss Vikram Sharma
2025-09-16 16:58 ` (subset) [PATCH v5 0/9] Add lemans(sa8775p) camss support Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250814101615.1102795-8-quic_vikramsa@quicinc.com \
--to=quic_vikramsa@quicinc.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=quic_svankada@quicinc.com \
--cc=quic_wenmliu@quicinc.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®