[PATCH v5 1/2] ASoC: dt-bindings: qcom,wsa8830: Add reset-gpios for shared line

[Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>]

On Qualcomm platforms such as QCS6490-RB3Gen2, the WSA883x speaker
amplifiers share the SD_N GPIO line between two speakers, thus
requires coordinated control when asserting the GPIO. Linux supports
shared GPIO handling via the "reset-gpios" property, which can be
used to specify either the powerdown or reset GPIOs.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 .../devicetree/bindings/sound/qcom,wsa883x.yaml       | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
index 14d312f9c345..098f1df62c8c 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -29,6 +29,10 @@ properties:
     description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
+  reset-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
   vdd-supply:
     description: VDD Supply for the Codec
 
@@ -50,10 +54,15 @@ required:
   - compatible
   - reg
   - vdd-supply
-  - powerdown-gpios
   - "#thermal-sensor-cells"
   - "#sound-dai-cells"
 
+oneOf:
+  - required:
+      - powerdown-gpios
+  - required:
+      - reset-gpios
+
 unevaluatedProperties: false
 
 examples:
-- 
2.34.1