From: Jonathan Cameron <jic23@kernel.org>
To: Claudiu <claudiu.beznea@tuxon.dev>
Cc: prabhakar.mahadev-lad.rj@bp.renesas.com, dlechner@baylibre.com,
nuno.sa@analog.com, andy@kernel.org, linux-iio@vger.kernel.org,
linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>,
Ulf Hansson <ulf.hansson@linaro.org>
Subject: Re: [PATCH v5 1/2] iio: adc: rzg2l: Cleanup suspend/resume path
Date: Sat, 16 Aug 2025 14:53:34 +0100 [thread overview]
Message-ID: <20250816145334.7a538a19@jic23-huawei> (raw)
In-Reply-To: <20250810123328.800104-2-claudiu.beznea.uj@bp.renesas.com>
On Sun, 10 Aug 2025 15:33:27 +0300
Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> There is no need to manually track the runtime PM status in the driver.
> The pm_runtime_force_suspend() and pm_runtime_force_resume() functions
> already call pm_runtime_status_suspended() to check the runtime PM state.
>
> Additionally, avoid calling pm_runtime_put_autosuspend() during the
> suspend/resume path, as this would decrease the usage counter of a
> potential user that had the ADC open before the suspend/resume cycle.
>
> Fixes: cb164d7c1526 ("iio: adc: rzg2l_adc: Add suspend/resume support")
That SHA isn't upstream. I think it should be.
563cf94f9329
With that fixes up, applied these to the fixes-togreg branch of iio.git and
marked them for stable.
> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v5:
> - none
>
> Changes in v4:
> - collected tags
>
> Changes in v3:
> - collected tags
>
> Changes in v2:
> - none
>
> drivers/iio/adc/rzg2l_adc.c | 29 ++++++++---------------------
> 1 file changed, 8 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
> index 9674d48074c9..0cb5a67fd497 100644
> --- a/drivers/iio/adc/rzg2l_adc.c
> +++ b/drivers/iio/adc/rzg2l_adc.c
> @@ -89,7 +89,6 @@ struct rzg2l_adc {
> struct completion completion;
> struct mutex lock;
> u16 last_val[RZG2L_ADC_MAX_CHANNELS];
> - bool was_rpm_active;
> };
>
> /**
> @@ -541,14 +540,9 @@ static int rzg2l_adc_suspend(struct device *dev)
> };
> int ret;
>
> - if (pm_runtime_suspended(dev)) {
> - adc->was_rpm_active = false;
> - } else {
> - ret = pm_runtime_force_suspend(dev);
> - if (ret)
> - return ret;
> - adc->was_rpm_active = true;
> - }
> + ret = pm_runtime_force_suspend(dev);
> + if (ret)
> + return ret;
>
> ret = reset_control_bulk_assert(ARRAY_SIZE(resets), resets);
> if (ret)
> @@ -557,9 +551,7 @@ static int rzg2l_adc_suspend(struct device *dev)
> return 0;
>
> rpm_restore:
> - if (adc->was_rpm_active)
> - pm_runtime_force_resume(dev);
> -
> + pm_runtime_force_resume(dev);
> return ret;
> }
>
> @@ -577,11 +569,9 @@ static int rzg2l_adc_resume(struct device *dev)
> if (ret)
> return ret;
>
> - if (adc->was_rpm_active) {
> - ret = pm_runtime_force_resume(dev);
> - if (ret)
> - goto resets_restore;
> - }
> + ret = pm_runtime_force_resume(dev);
> + if (ret)
> + goto resets_restore;
>
> ret = rzg2l_adc_hw_init(dev, adc);
> if (ret)
> @@ -590,10 +580,7 @@ static int rzg2l_adc_resume(struct device *dev)
> return 0;
>
> rpm_restore:
> - if (adc->was_rpm_active) {
> - pm_runtime_mark_last_busy(dev);
> - pm_runtime_put_autosuspend(dev);
> - }
> + pm_runtime_force_suspend(dev);
> resets_restore:
> reset_control_bulk_assert(ARRAY_SIZE(resets), resets);
> return ret;
next prev parent reply other threads:[~2025-08-16 13:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-10 12:33 [PATCH v5 0/2] iio: rzg2l_adc: Cleanups for rzg2l_adc driver Claudiu
2025-08-10 12:33 ` [PATCH v5 1/2] iio: adc: rzg2l: Cleanup suspend/resume path Claudiu
2025-08-16 13:53 ` Jonathan Cameron [this message]
2025-08-18 5:54 ` Claudiu Beznea
2025-08-10 12:33 ` [PATCH v5 2/2] iio: adc: rzg2l_adc: Set driver data before enabling runtime PM Claudiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250816145334.7a538a19@jic23-huawei \
--to=jic23@kernel.org \
--cc=andy@kernel.org \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=dlechner@baylibre.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®