mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexander Kurz <akurz@blala.de>
To: "Lee Jones" <lee@kernel.org>, "Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
	"Dzmitry Sankouski" <dsankouski@gmail.com>,
	"Dr. David Alan Gilbert" <linux@treblig.org>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
	devicetree@vger.kernel.org, linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Alexander Kurz <akurz@blala.de>
Subject: [PATCH 5/6] dt-bindings: mfd: mc13xxx: add pwrbutton dt support
Date: Sun, 17 Aug 2025 10:27:49 +0000	[thread overview]
Message-ID: <20250817102751.29709-6-akurz@blala.de> (raw)
In-Reply-To: <20250817102751.29709-1-akurz@blala.de>

The mc13xxx series features two or three power buttons that may be used
as input device. OF support will be added in a different commit.
Add a short documentation for it according to the reference- and User-
manuals of the mc13xxx series.

Signed-off-by: Alexander Kurz <akurz@blala.de>
---
 .../devicetree/bindings/mfd/mc13xxx.txt       | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 8261ea73278a..3c7bad07858f 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -24,6 +24,15 @@ Sub-nodes:
   Documentation/devicetree/bindings/leds/common.txt.
 - regulators : Contain the regulator nodes. The regulators are bound using
   their names as listed below with their registers and bits for enabling.
+- pwrbuttons : Contains the onoff input button nodes.
+  - #address-cells: Must be 1.
+  - #size-cells: Must be 0.
+  - reg: Contains the BUTTON ID (see below)
+  - linux,code
+  - debounce-delay-value: debouncing selection of 0 (0ms), 1 (default 30ms),
+    2(150ms) or 3 (750ms).
+  - active-low
+  - enable-reset
 
 MC13783 LED IDs:
     0  : Main display
@@ -110,6 +119,20 @@ MC13892 regulators:
   The bindings details of individual regulator device can be found in:
   Documentation/devicetree/bindings/regulator/regulator.txt
 
+MC13783 BUTTON IDs:
+    0  : ONOFD1
+    1  : ONOFD2
+    2  : ONOFD3
+
+MC13892 BUTTON IDs:
+    0  : PWRON1
+    1  : PWRON2
+    2  : <not supported>
+
+MC34708 BUTTON IDs:
+    0  : PWRON1
+    1  : PWRON2
+
 Examples:
 
 ecspi@70010000 { /* ECSPI1 */
@@ -152,5 +175,17 @@ ecspi@70010000 { /* ECSPI1 */
 				regulator-always-on;
 			};
 		};
+
+		pwrbuttons {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pwrbutton@0 {
+				reg = <0>;
+				linux,code = <KEY_POWER>;
+				debounce-delay-value = <2>;
+				active-low;
+				enable-reset;
+			};
+		};
 	};
 };
-- 
2.39.5


  parent reply	other threads:[~2025-08-17 10:23 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-17 10:27 [PATCH 0/6] Fix, extend and upport OF to mc13xxx pwrbutton Alexander Kurz
2025-08-17 10:27 ` [PATCH 1/6] Input: mc13783-pwrbutton: fix irq mixup Alexander Kurz
2025-08-17 10:27 ` [PATCH 2/6] Input: mc13783-pwrbutton: use managed resources Alexander Kurz
2025-08-17 10:27 ` [PATCH 3/6] Input: mc13783-pwrbutton: enable other mc13xxx PMIC Alexander Kurz
2025-09-02 13:43   ` Lee Jones
2025-08-17 10:27 ` [PATCH 4/6] Input: mc13783-pwrbutton: convert members to array Alexander Kurz
2025-08-21  7:08   ` Dan Carpenter
2025-08-17 10:27 ` Alexander Kurz [this message]
2025-08-17 11:20   ` [PATCH 5/6] dt-bindings: mfd: mc13xxx: add pwrbutton dt support Krzysztof Kozlowski
2025-08-17 10:27 ` [PATCH 6/6] Input: mc13783-pwrbutton: add OF support Alexander Kurz
2025-08-17 11:24   ` Krzysztof Kozlowski
2025-08-17 16:41   ` kernel test robot
2025-08-18  1:03   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250817102751.29709-6-akurz@blala.de \
    --to=akurz@blala.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dsankouski@gmail.com \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@treblig.org \
    --cc=robh@kernel.org \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®