[PATCH net v2 2/2] mips: lantiq: xway: sysctrl: rename the etop node

[Aleksander Jan Bajkowski <olek2@wp.pl>]

Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.

This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#

Fixes: dac0bad93741 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
 arch/mips/boot/dts/lantiq/danube_easy50712.dts |  2 +-
 arch/mips/lantiq/xway/sysctrl.c                | 10 +++++-----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mips/boot/dts/lantiq/danube_easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
index d8b3cd69eda3..c4d7aa5753b0 100644
--- a/arch/mips/boot/dts/lantiq/danube_easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
@@ -82,7 +82,7 @@ conf_out {
 			};
 		};
 
-		etop@e180000 {
+		ethernet@e180000 {
 			compatible = "lantiq,etop-xway";
 			reg = <0xe180000 0x40000>;
 			interrupt-parent = <&icu0>;
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 5a75283d17f1..6031a0272d87 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -497,7 +497,7 @@ void __init ltq_soc_init(void)
 		ifccr = CGU_IFCCR_VR9;
 		pcicr = CGU_PCICR_VR9;
 	} else {
-		clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE);
+		clkdev_add_pmu("1e180000.ethernet", NULL, 1, 0, PMU_PPE);
 	}
 
 	if (!of_machine_is_compatible("lantiq,ase"))
@@ -531,9 +531,9 @@ void __init ltq_soc_init(void)
 						CLOCK_133M, CLOCK_133M);
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
-		clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE);
-		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY);
-		clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY);
+		clkdev_add_pmu("1e180000.ethernet", "ppe", 1, 0, PMU_PPE);
+		clkdev_add_cgu("1e180000.ethernet", "ephycgu", CGU_EPHY);
+		clkdev_add_pmu("1e180000.ethernet", "ephy", 1, 0, PMU_EPHY);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
 	} else if (of_machine_is_compatible("lantiq,grx390")) {
@@ -592,7 +592,7 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
 		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
-		clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
+		clkdev_add_pmu("1e180000.ethernet", "switch", 1, 0, PMU_SWITCH);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
-- 
2.47.2