From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: <andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <richardcochran@gmail.com>,
<o.rempel@pengutronix.de>, <alok.a.tiwari@oracle.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: [PATCH net-next v5 1/4] net: phy: micrel: Start using PHY_ID_MATCH_MODEL
Date: Mon, 18 Aug 2025 09:51:18 +0200 [thread overview]
Message-ID: <20250818075121.1298170-2-horatiu.vultur@microchip.com> (raw)
In-Reply-To: <20250818075121.1298170-1-horatiu.vultur@microchip.com>
Start using PHY_ID_MATCH_MODEL for all the drivers.
While at this add also PHY_ID_KSZ8041RNLI to micrel_tbl.
It is safe to change the current of 0x00fffff0 to PHY_ID_MATCH_MODEL
because all the micrel PHYs have in MSB a value of 0.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
drivers/net/phy/micrel.c | 66 ++++++++++++++++------------------------
1 file changed, 27 insertions(+), 39 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 605b0315b4cb0..e138f208c0e49 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -5645,8 +5645,7 @@ static int ksz9131_resume(struct phy_device *phydev)
static struct phy_driver ksphy_driver[] = {
{
- .phy_id = PHY_ID_KS8737,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KS8737),
.name = "Micrel KS8737",
/* PHY_BASIC_FEATURES */
.driver_data = &ks8737_type,
@@ -5687,8 +5686,7 @@ static struct phy_driver ksphy_driver[] = {
.suspend = kszphy_suspend,
.resume = kszphy_resume,
}, {
- .phy_id = PHY_ID_KSZ8041,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ8041),
.name = "Micrel KSZ8041",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
@@ -5703,8 +5701,7 @@ static struct phy_driver ksphy_driver[] = {
.suspend = ksz8041_suspend,
.resume = ksz8041_resume,
}, {
- .phy_id = PHY_ID_KSZ8041RNLI,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ8041RNLI),
.name = "Micrel KSZ8041RNLI",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
@@ -5747,9 +5744,8 @@ static struct phy_driver ksphy_driver[] = {
.suspend = kszphy_suspend,
.resume = kszphy_resume,
}, {
- .phy_id = PHY_ID_KSZ8081,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ8081),
.name = "Micrel KSZ8081 or KSZ8091",
- .phy_id_mask = MICREL_PHY_ID_MASK,
.flags = PHY_POLL_CABLE_TEST,
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8081_type,
@@ -5768,9 +5764,8 @@ static struct phy_driver ksphy_driver[] = {
.cable_test_start = ksz886x_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
}, {
- .phy_id = PHY_ID_KSZ8061,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ8061),
.name = "Micrel KSZ8061",
- .phy_id_mask = MICREL_PHY_ID_MASK,
/* PHY_BASIC_FEATURES */
.probe = kszphy_probe,
.config_init = ksz8061_config_init,
@@ -5798,8 +5793,7 @@ static struct phy_driver ksphy_driver[] = {
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
}, {
- .phy_id = PHY_ID_KSZ9031,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ9031),
.name = "Micrel KSZ9031 Gigabit PHY",
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9021_type,
@@ -5819,8 +5813,7 @@ static struct phy_driver ksphy_driver[] = {
.cable_test_get_status = ksz9x31_cable_test_get_status,
.set_loopback = ksz9031_set_loopback,
}, {
- .phy_id = PHY_ID_LAN8814,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_LAN8814),
.name = "Microchip INDY Gigabit Quad PHY",
.flags = PHY_POLL_CABLE_TEST,
.config_init = lan8814_config_init,
@@ -5838,8 +5831,7 @@ static struct phy_driver ksphy_driver[] = {
.cable_test_start = lan8814_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
}, {
- .phy_id = PHY_ID_LAN8804,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_LAN8804),
.name = "Microchip LAN966X Gigabit PHY",
.config_init = lan8804_config_init,
.driver_data = &ksz9021_type,
@@ -5854,8 +5846,7 @@ static struct phy_driver ksphy_driver[] = {
.config_intr = lan8804_config_intr,
.handle_interrupt = lan8804_handle_interrupt,
}, {
- .phy_id = PHY_ID_LAN8841,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_LAN8841),
.name = "Microchip LAN8841 Gigabit PHY",
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &lan8841_type,
@@ -5872,8 +5863,7 @@ static struct phy_driver ksphy_driver[] = {
.cable_test_start = lan8814_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
}, {
- .phy_id = PHY_ID_KSZ9131,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ9131),
.name = "Microchip KSZ9131 Gigabit PHY",
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
@@ -5894,8 +5884,7 @@ static struct phy_driver ksphy_driver[] = {
.cable_test_get_status = ksz9x31_cable_test_get_status,
.get_features = ksz9477_get_features,
}, {
- .phy_id = PHY_ID_KSZ8873MLL,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ8873MLL),
.name = "Micrel KSZ8873MLL Switch",
/* PHY_BASIC_FEATURES */
.config_init = kszphy_config_init,
@@ -5904,8 +5893,7 @@ static struct phy_driver ksphy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_KSZ886X,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ886X),
.name = "Micrel KSZ8851 Ethernet MAC or KSZ886X Switch",
.driver_data = &ksz886x_type,
/* PHY_BASIC_FEATURES */
@@ -5925,8 +5913,7 @@ static struct phy_driver ksphy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_KSZ9477,
- .phy_id_mask = MICREL_PHY_ID_MASK,
+ PHY_ID_MATCH_MODEL(PHY_ID_KSZ9477),
.name = "Microchip KSZ9477",
.probe = kszphy_probe,
/* PHY_GBIT_FEATURES */
@@ -5953,22 +5940,23 @@ MODULE_LICENSE("GPL");
static const struct mdio_device_id __maybe_unused micrel_tbl[] = {
{ PHY_ID_KSZ9021, 0x000ffffe },
- { PHY_ID_KSZ9031, MICREL_PHY_ID_MASK },
- { PHY_ID_KSZ9131, MICREL_PHY_ID_MASK },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ9031) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ9131) },
{ PHY_ID_KSZ8001, 0x00fffffc },
- { PHY_ID_KS8737, MICREL_PHY_ID_MASK },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KS8737) },
{ PHY_ID_KSZ8021, 0x00ffffff },
{ PHY_ID_KSZ8031, 0x00ffffff },
- { PHY_ID_KSZ8041, MICREL_PHY_ID_MASK },
- { PHY_ID_KSZ8051, MICREL_PHY_ID_MASK },
- { PHY_ID_KSZ8061, MICREL_PHY_ID_MASK },
- { PHY_ID_KSZ8081, MICREL_PHY_ID_MASK },
- { PHY_ID_KSZ8873MLL, MICREL_PHY_ID_MASK },
- { PHY_ID_KSZ886X, MICREL_PHY_ID_MASK },
- { PHY_ID_KSZ9477, MICREL_PHY_ID_MASK },
- { PHY_ID_LAN8814, MICREL_PHY_ID_MASK },
- { PHY_ID_LAN8804, MICREL_PHY_ID_MASK },
- { PHY_ID_LAN8841, MICREL_PHY_ID_MASK },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ8041) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ8041RNLI) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ8051) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ8061) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ8081) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ8873MLL) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ886X) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_KSZ9477) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_LAN8814) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_LAN8804) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_LAN8841) },
{ }
};
--
2.34.1
next prev parent reply other threads:[~2025-08-18 7:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-18 7:51 [PATCH net-next v5 0/4] net: phy: micrel: Add support for lan8842 Horatiu Vultur
2025-08-18 7:51 ` Horatiu Vultur [this message]
2025-08-20 3:14 ` [PATCH net-next v5 1/4] net: phy: micrel: Start using PHY_ID_MATCH_MODEL Andrew Lunn
2025-08-18 7:51 ` [PATCH net-next v5 2/4] net: phy: micrel: Introduce lanphy_modify_page_reg Horatiu Vultur
2025-08-18 7:51 ` [PATCH net-next v5 3/4] net: phy: micrel: Replace hardcoded pages with defines Horatiu Vultur
2025-08-18 7:51 ` [PATCH net-next v5 4/4] net: phy: micrel: Add support for lan8842 Horatiu Vultur
2025-08-20 3:18 ` Andrew Lunn
2025-08-21 8:50 ` [PATCH net-next v5 0/4] " patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250818075121.1298170-2-horatiu.vultur@microchip.com \
--to=horatiu.vultur@microchip.com \
--cc=alok.a.tiwari@oracle.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®