mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	 Daniel Lezcano <daniel.lezcano@linaro.org>,
	Zhang Rui <rui.zhang@intel.com>,
	 Lukasz Luba <lukasz.luba@arm.com>,
	Heiko Stuebner <heiko@sntech.de>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
	 Diederik de Haas <didi.debian@cknow.org>,
	linux-pm@vger.kernel.org,  linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 kernel@collabora.com,
	Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCH v2 2/3] thermal: rockchip: shut up GRF warning
Date: Wed, 20 Aug 2025 19:40:48 +0200	[thread overview]
Message-ID: <20250820-thermal-rockchip-grf-warning-v2-2-c7e2d35017b8@kernel.org> (raw)
In-Reply-To: <20250820-thermal-rockchip-grf-warning-v2-0-c7e2d35017b8@kernel.org>

Most of the recent Rockchip devices do not have a GRF associated
with the tsadc IP. Let's avoid printing a warning on those devices.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/thermal/rockchip_thermal.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 7b18a705dfade6fa7318b28c2b57544a4446c1cc..c49ddf70f86e7beaf0190b1b3e93f5e6b2f72b2c 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -74,6 +74,7 @@ struct chip_tsadc_table {
  * @tshut_temp: the hardware-controlled shutdown temperature value, with no trim
  * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
  * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
+ * @grf_required: true, if a GRF is required for proper functionality
  * @initialize: SoC special initialize tsadc controller method
  * @irq_ack: clear the interrupt
  * @control: enable/disable method for the tsadc controller
@@ -97,6 +98,9 @@ struct rockchip_tsadc_chip {
 	enum tshut_mode tshut_mode;
 	enum tshut_polarity tshut_polarity;
 
+	/* GRF availability */
+	bool grf_required;
+
 	/* Chip-wide methods */
 	void (*initialize)(struct regmap *grf,
 			   void __iomem *reg, enum tshut_polarity p);
@@ -1098,6 +1102,7 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
 	/* cpu, gpu */
 	.chn_offset = 0,
 	.chn_num = 2, /* 2 channels for tsadc */
+	.grf_required = true,
 	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
 	.tshut_temp = 95000,
 	.initialize = rk_tsadcv4_initialize,
@@ -1119,6 +1124,7 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
 	/* cpu */
 	.chn_offset = 0,
 	.chn_num = 1, /* one channel for tsadc */
+	.grf_required = false,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1141,6 +1147,7 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
 	/* cpu */
 	.chn_offset = 0,
 	.chn_num = 1, /* one channel for tsadc */
+	.grf_required = false,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1163,6 +1170,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 	/* cpu, gpu */
 	.chn_offset = 1,
 	.chn_num = 2, /* two channels for tsadc */
+	.grf_required = false,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1185,6 +1193,7 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
 	/* cpu */
 	.chn_offset = 0,
 	.chn_num = 1, /* one channels for tsadc */
+	.grf_required = false,
 	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
 	.tshut_temp = 95000,
 	.initialize = rk_tsadcv2_initialize,
@@ -1206,6 +1215,7 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
 	/* cpu, gpu */
 	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
+	.grf_required = true,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1228,6 +1238,7 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 	/* cpu, gpu */
 	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
+	.grf_required = false,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1250,6 +1261,7 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
 	/* cpu, gpu */
 	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
+	.grf_required = true,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1272,6 +1284,7 @@ static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
 	/* cpu, gpu */
 	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
+	.grf_required = true,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1294,6 +1307,7 @@ static const struct rockchip_tsadc_chip rk3576_tsadc_data = {
 	/* top, big_core, little_core, ddr, npu, gpu */
 	.chn_offset = 0,
 	.chn_num = 6, /* six channels for tsadc */
+	.grf_required = false,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1318,6 +1332,7 @@ static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
 	/* top, big_core0, big_core1, little_core, center, gpu, npu */
 	.chn_offset = 0,
 	.chn_num = 7, /* seven channels for tsadc */
+	.grf_required = false,
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
 	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
 	.tshut_temp = 95000,
@@ -1594,12 +1609,10 @@ static int rockchip_configure_from_dt(struct device *dev,
 		return -EINVAL;
 	}
 
-	/* The tsadc wont to handle the error in here since some SoCs didn't
-	 * need this property.
-	 */
 	thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
-	if (IS_ERR(thermal->grf))
-		dev_warn(dev, "Missing rockchip,grf property\n");
+	if (IS_ERR(thermal->grf) && thermal->chip->grf_required)
+		return dev_err_probe(dev, PTR_ERR(thermal->grf),
+				     "Missing rockchip,grf property\n");
 
 	rockchip_get_trim_configuration(dev, np, thermal);
 

-- 
2.50.1


  parent reply	other threads:[~2025-08-20 17:41 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-20 17:40 [PATCH v2 0/3] " Sebastian Reichel
2025-08-20 17:40 ` [PATCH v2 1/3] thermal: rockchip: unify struct rockchip_tsadc_chip format Sebastian Reichel
2025-08-20 20:11   ` Heiko Stübner
2025-08-22  3:11   ` Dragan Simic
2025-08-20 17:40 ` Sebastian Reichel [this message]
2025-08-20 20:14   ` [PATCH v2 2/3] thermal: rockchip: shut up GRF warning Heiko Stübner
2025-08-21 12:41   ` Diederik de Haas
2025-08-22  3:15   ` Dragan Simic
2025-08-20 17:40 ` [PATCH v2 3/3] dt-bindings: thermal: rockchip: tighten grf requirements Sebastian Reichel
2025-08-20 19:48   ` Conor Dooley
2025-09-19 18:35     ` Sebastian Reichel
2025-09-21 22:20       ` Conor Dooley
2025-08-22  3:20   ` Dragan Simic
2025-09-19 15:55 ` [PATCH v2 0/3] thermal: rockchip: shut up GRF warning Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250820-thermal-rockchip-grf-warning-v2-2-c7e2d35017b8@kernel.org \
    --to=sebastian.reichel@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=didi.debian@cknow.org \
    --cc=heiko@sntech.de \
    --cc=kernel@collabora.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=lukasz.luba@arm.com \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®