mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@oss.qualcomm.com
Subject: [PATCH v4 2/2] arm64: dts: qcom: lemans-evk: Add sound card
Date: Fri, 22 Aug 2025 18:49:02 +0530	[thread overview]
Message-ID: <20250822131902.1848802-3-mohammad.rafi.shaik@oss.qualcomm.com> (raw)
In-Reply-To: <20250822131902.1848802-1-mohammad.rafi.shaik@oss.qualcomm.com>

Add the sound card node with tested playback over max98357a
I2S speakers amplifier and I2S mic.

Introduce HS (High-Speed) MI2S pin control support.
The I2S max98357a speaker amplifier is connected via HS0 and I2S
microphones utilize the HS2 interface.

Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 +++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/lemans.dtsi    | 14 +++++++
 2 files changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 669ac52f4cf6..d67a9307cc75 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "lemans.dtsi"
@@ -22,6 +23,57 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "qcom,qcs9100-sndcard";
+		model = "LEMANS-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&hs2_mi2s_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		hs2-mi2s-capture-dai-link {
+			link-name = "HS2 MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TERTIARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 7026f25877c8..d73037d6d97a 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -5005,6 +5005,20 @@ tlmm: pinctrl@f000000 {
 			gpio-ranges = <&tlmm 0 0 149>;
 			wakeup-parent = <&pdc>;
 
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio114", "gpio115", "gpio116", "gpio117";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			hs2_mi2s_active: hs2-mi2s-active-state {
+				pins = "gpio122", "gpio123", "gpio124", "gpio125";
+				function = "hs2_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
 			qup_i2c0_default: qup-i2c0-state {
 				pins = "gpio20", "gpio21";
 				function = "qup0_se0";
-- 
2.34.1


  parent reply	other threads:[~2025-08-22 13:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-22 13:19 [PATCH v4 0/2] Enable audio on lemans-evk board Mohammad Rafi Shaik
2025-08-22 13:19 ` [PATCH v4 1/2] arm64: dts: qcom: lemans: Add gpr node Mohammad Rafi Shaik
2025-08-22 13:19 ` Mohammad Rafi Shaik [this message]
2025-09-03 12:14   ` [PATCH v4 2/2] arm64: dts: qcom: lemans-evk: Add sound card Konrad Dybcio
2025-09-03 12:14   ` Konrad Dybcio
2025-09-09 16:56 ` [PATCH v4 0/2] Enable audio on lemans-evk board Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250822131902.1848802-3-mohammad.rafi.shaik@oss.qualcomm.com \
    --to=mohammad.rafi.shaik@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®