From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.oss.qualcomm.com@kernel.org>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Nirmal Patel" <nirmal.patel@linux.intel.com>,
"Jonathan Derrick" <jonathan.derrick@linux.dev>,
"Jeff Johnson" <jjohnson@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-wireless@vger.kernel.org,
ath12k@lists.infradead.org, ath11k@lists.infradead.org,
ath10k@lists.infradead.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Krishna Chaitanya Chundru" <krishna.chundru@oss.qualcomm.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@oss.qualcomm.com>,
"Qiang Yu" <qiang.yu@oss.qualcomm.com>
Subject: [PATCH v2 6/8] wifi: ath12k: Use pci_{enable/disable}_link_state() APIs to enable/disable ASPM states
Date: Mon, 25 Aug 2025 23:14:41 +0530 [thread overview]
Message-ID: <20250825-ath-aspm-fix-v2-6-61b2f2db7d89@oss.qualcomm.com> (raw)
In-Reply-To: <20250825-ath-aspm-fix-v2-0-61b2f2db7d89@oss.qualcomm.com>
From: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
It is not recommended to enable/disable the ASPM states on the back of the
PCI core directly using the LNKCTL register. It will break the PCI core's
knowledge about the device ASPM states. So use the APIs exposed by the PCI
core to enable/disable ASPM states.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Reported-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
---
drivers/net/wireless/ath/ath12k/Kconfig | 2 +-
drivers/net/wireless/ath/ath12k/pci.c | 19 +++----------------
drivers/net/wireless/ath/ath12k/pci.h | 4 +++-
3 files changed, 7 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/Kconfig b/drivers/net/wireless/ath/ath12k/Kconfig
index 1ea1af1b8f6c5425c38663977f1d60fe3acb5437..789276e1e9c289de7afdbcaf72be6410b6ea7385 100644
--- a/drivers/net/wireless/ath/ath12k/Kconfig
+++ b/drivers/net/wireless/ath/ath12k/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause-Clear
config ATH12K
tristate "Qualcomm Technologies Wi-Fi 7 support (ath12k)"
- depends on MAC80211 && HAS_DMA && PCI
+ depends on MAC80211 && HAS_DMA && PCI && PCIEASPM
select CRYPTO_MICHAEL_MIC
select QCOM_QMI_HELPERS
select MHI_BUS
diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index c729d5526c753d2b7b7542b6f2a145e71b335a43..29236da231e51ac402e40dd124bb474b3102e6c8 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -917,19 +917,9 @@ static void ath12k_pci_free_region(struct ath12k_pci *ab_pci)
static void ath12k_pci_aspm_disable(struct ath12k_pci *ab_pci)
{
- struct ath12k_base *ab = ab_pci->ab;
-
- pcie_capability_read_word(ab_pci->pdev, PCI_EXP_LNKCTL,
- &ab_pci->link_ctl);
-
- ath12k_dbg(ab, ATH12K_DBG_PCI, "pci link_ctl 0x%04x L0s %d L1 %d\n",
- ab_pci->link_ctl,
- u16_get_bits(ab_pci->link_ctl, PCI_EXP_LNKCTL_ASPM_L0S),
- u16_get_bits(ab_pci->link_ctl, PCI_EXP_LNKCTL_ASPM_L1));
+ ab_pci->aspm_states = pcie_aspm_enabled(ab_pci->pdev);
- /* disable L0s and L1 */
- pcie_capability_clear_word(ab_pci->pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC);
+ pci_disable_link_state(ab_pci->pdev, PCIE_LINK_STATE_ALL);
set_bit(ATH12K_PCI_ASPM_RESTORE, &ab_pci->flags);
}
@@ -958,10 +948,7 @@ static void ath12k_pci_aspm_restore(struct ath12k_pci *ab_pci)
{
if (ab_pci->ab->hw_params->supports_aspm &&
test_and_clear_bit(ATH12K_PCI_ASPM_RESTORE, &ab_pci->flags))
- pcie_capability_clear_and_set_word(ab_pci->pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC,
- ab_pci->link_ctl &
- PCI_EXP_LNKCTL_ASPMC);
+ pci_enable_link_state(ab_pci->pdev, ab_pci->aspm_states);
}
static void ath12k_pci_cancel_workqueue(struct ath12k_base *ab)
diff --git a/drivers/net/wireless/ath/ath12k/pci.h b/drivers/net/wireless/ath/ath12k/pci.h
index d1ec8aad7f6c3b6f5cbdf8ce57a4106733686521..f3e4e59323036e6251d422b7a2d1997811cc3f98 100644
--- a/drivers/net/wireless/ath/ath12k/pci.h
+++ b/drivers/net/wireless/ath/ath12k/pci.h
@@ -114,7 +114,9 @@ struct ath12k_pci {
/* enum ath12k_pci_flags */
unsigned long flags;
- u16 link_ctl;
+
+ /* Cached PCIe ASPM states */
+ u32 aspm_states;
unsigned long irq_flags;
const struct ath12k_pci_ops *pci_ops;
u32 qmi_instance;
--
2.45.2
next prev parent reply other threads:[~2025-08-25 17:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-25 17:44 [PATCH v2 0/8] PCI/ASPM: Fix pci_enable_link_state*() APIs behavior Manivannan Sadhasivam via B4 Relay
2025-08-25 17:44 ` [PATCH v2 1/8] PCI/ASPM: Always disable ASPM when driver requests it Manivannan Sadhasivam via B4 Relay
2025-08-25 17:44 ` [PATCH v2 2/8] PCI/ASPM: Fix the behavior of pci_enable_link_state*() APIs Manivannan Sadhasivam via B4 Relay
2025-08-26 12:55 ` Ilpo Järvinen
2025-08-26 21:24 ` David Box
2025-09-06 15:37 ` Manivannan Sadhasivam
2025-09-06 14:53 ` Manivannan Sadhasivam
2025-09-08 10:24 ` Ilpo Järvinen
2025-08-25 17:44 ` [PATCH v2 3/8] PCI/ASPM: Transition the device to D0 (if required) inside pci_enable_link_state_locked() API Manivannan Sadhasivam via B4 Relay
2025-08-25 17:44 ` [PATCH v2 4/8] PCI/ASPM: Improve the kernel-doc for pci_disable_link_state*() APIs Manivannan Sadhasivam via B4 Relay
2025-08-25 17:44 ` [PATCH v2 5/8] PCI/ASPM: Return enabled ASPM states from pcie_aspm_enabled() API Manivannan Sadhasivam via B4 Relay
2025-08-26 15:19 ` Jeff Johnson
2025-08-25 17:44 ` Manivannan Sadhasivam via B4 Relay [this message]
2025-08-26 15:38 ` [PATCH v2 6/8] wifi: ath12k: Use pci_{enable/disable}_link_state() APIs to enable/disable ASPM states Jeff Johnson
2025-08-26 16:00 ` Ilpo Järvinen
2025-08-26 16:40 ` Jeff Johnson
2025-08-25 17:44 ` [PATCH v2 7/8] wifi: ath11k: " Manivannan Sadhasivam via B4 Relay
2025-08-25 17:44 ` [PATCH v2 8/8] wifi: ath10k: " Manivannan Sadhasivam via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250825-ath-aspm-fix-v2-6-61b2f2db7d89@oss.qualcomm.com \
--to=devnull+manivannan.sadhasivam.oss.qualcomm.com@kernel.org \
--cc=ath10k@lists.infradead.org \
--cc=ath11k@lists.infradead.org \
--cc=ath12k@lists.infradead.org \
--cc=bhelgaas@google.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jjohnson@kernel.org \
--cc=jonathan.derrick@linux.dev \
--cc=krishna.chundru@oss.qualcomm.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=manivannan.sadhasivam@oss.qualcomm.com \
--cc=nirmal.patel@linux.intel.com \
--cc=qiang.yu@oss.qualcomm.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®