From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Vignesh Raghavendra <vigneshr@ti.com>,
Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Tony Lindgren <tony@atomide.com>
Cc: Matthias Schiffer <matthias.schiffer@tq-group.com>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Alexander Stein <alexander.stein@ew.tq-group.com>
Subject: [PATCH v2 2/2] mmc: sdhci-omap: use regulator_get_optional() and reuse pbias in sdhci_omap_regulator_get_caps()
Date: Mon, 25 Aug 2025 14:21:47 +0200 [thread overview]
Message-ID: <20250825122149.2169502-2-alexander.stein@ew.tq-group.com> (raw)
In-Reply-To: <20250825122149.2169502-1-alexander.stein@ew.tq-group.com>
From: Matthias Schiffer <matthias.schiffer@tq-group.com>
We actually want to get an error return instead of a dummy regulator
when a supply is not set. Change regulator_get() to
regulator_get_optional() for the vqmmc supply and reuse omap_host->pbias,
which is already initialized at this point.
This change also avoids warning messages:
sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator
sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator
Fixes: de5ccd2af71f ("mmc: sdhci-omap: Handle voltages to add support omap4")
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
drivers/mmc/host/sdhci-omap.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 08d5a82b7d01b..4623781adba7b 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -939,16 +939,10 @@ static const struct sdhci_ops sdhci_omap_ops = {
.set_timeout = sdhci_omap_set_timeout,
};
-static unsigned int sdhci_omap_regulator_get_caps(struct device *dev,
- const char *name)
+static unsigned int sdhci_omap_regulator_get_caps(struct regulator *reg)
{
- struct regulator *reg;
unsigned int caps = 0;
- reg = regulator_get(dev, name);
- if (IS_ERR(reg))
- return ~0U;
-
if (regulator_is_supported_voltage(reg, 1700000, 1950000) > 0)
caps |= SDHCI_CAN_VDD_180;
if (regulator_is_supported_voltage(reg, 2700000, 3150000) > 0)
@@ -956,8 +950,6 @@ static unsigned int sdhci_omap_regulator_get_caps(struct device *dev,
if (regulator_is_supported_voltage(reg, 3150000, 3600000) > 0)
caps |= SDHCI_CAN_VDD_330;
- regulator_put(reg);
-
return caps;
}
@@ -967,11 +959,20 @@ static int sdhci_omap_set_capabilities(struct sdhci_host *host)
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
struct device *dev = omap_host->dev;
const u32 mask = SDHCI_CAN_VDD_180 | SDHCI_CAN_VDD_300 | SDHCI_CAN_VDD_330;
- unsigned int pbias, vqmmc, caps = 0;
+ unsigned int pbias = ~0U, vqmmc = ~0U, caps = 0;
+ struct regulator *reg_vqmmc;
u32 reg;
- pbias = sdhci_omap_regulator_get_caps(dev, "pbias");
- vqmmc = sdhci_omap_regulator_get_caps(dev, "vqmmc");
+ if (!IS_ERR(omap_host->pbias))
+ pbias = sdhci_omap_regulator_get_caps(omap_host->pbias);
+
+ /* mmc->supply.vqmmc is not initialized yet */
+ reg_vqmmc = regulator_get_optional(dev, "vqmmc");
+ if (!IS_ERR(reg_vqmmc)) {
+ vqmmc = sdhci_omap_regulator_get_caps(reg_vqmmc);
+ regulator_put(reg_vqmmc);
+ }
+
caps = pbias & vqmmc;
if (pbias != ~0U && vqmmc == ~0U)
--
2.43.0
next prev parent reply other threads:[~2025-08-25 12:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-25 12:21 [PATCH v2 1/2] mmc: sdhci-omap: properly check regulator_is_supported_voltage() return Alexander Stein
2025-08-25 12:21 ` Alexander Stein [this message]
2025-08-29 6:11 ` [PATCH v2 2/2] mmc: sdhci-omap: use regulator_get_optional() and reuse pbias in sdhci_omap_regulator_get_caps() Adrian Hunter
2025-08-29 4:55 ` [PATCH v2 1/2] mmc: sdhci-omap: properly check regulator_is_supported_voltage() return Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250825122149.2169502-2-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=adrian.hunter@intel.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=matthias.schiffer@tq-group.com \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®