mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jai Luthra <jai.luthra@ideasonboard.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>,
	Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	kernel-list@raspberrypi.com, Stefan Wahren <wahrenst@gmx.net>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Umang Jain <uajain@igalia.com>
Subject: Re: [PATCH 1/5] include: linux: Destage VCHIQ interface headers
Date: Wed, 27 Aug 2025 14:40:16 +0200	[thread overview]
Message-ID: <20250827124016.GF5650@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20250827-vchiq-destage-v1-1-5052a0d81c42@ideasonboard.com>

Hi Jai,

Thank you for the patch.

On Wed, Aug 27, 2025 at 11:54:08AM +0530, Jai Luthra wrote:
> From: Umang Jain <umang.jain@ideasonboard.com>
> 
> Move the VCHIQ headers from drivers/staging/vc04_services/include to
> include/linux/vchiq
> 
> This is done so that they can be shared between the VCHIQ interface
> (which is going to be de-staged in a subsequent commit from staging)
> and the VCHIQ drivers left in the staging/vc04_services (namely
> bcm2835-audio, bcm2835-camera).
> 
> The include/linux/vchiq/ provides a central location to serve both
> of these areas.

Lots of SoC-specific headers are stored in include/linux/soc/$vendor/.
This would be include/linux/soc/bcm/vchiq/ in this case. I'm also fine
with include/linux/vchiq/ but other people may have a preference.

> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
> ---
>  MAINTAINERS                                                      | 1 +
>  drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c      | 5 +++--
>  drivers/staging/vc04_services/bcm2835-audio/bcm2835.c            | 3 ++-
>  drivers/staging/vc04_services/bcm2835-audio/bcm2835.h            | 3 +--
>  drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c    | 3 ++-
>  drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c    | 9 +++++----
>  drivers/staging/vc04_services/interface/vchiq_arm/vchiq_bus.c    | 4 ++--
>  drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c   | 4 ++--
>  .../staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c    | 6 +++---
>  drivers/staging/vc04_services/interface/vchiq_arm/vchiq_dev.c    | 7 ++++---
>  drivers/staging/vc04_services/interface/vchiq_arm/vchiq_ioctl.h  | 3 +--
>  drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c            | 5 +++--
>  .../include/linux/raspberrypi => include/linux/vchiq}/vchiq.h    | 0
>  .../interface/vchiq_arm => include/linux/vchiq}/vchiq_arm.h      | 0
>  .../interface/vchiq_arm => include/linux/vchiq}/vchiq_bus.h      | 0
>  .../interface/vchiq_arm => include/linux/vchiq}/vchiq_cfg.h      | 0
>  .../interface/vchiq_arm => include/linux/vchiq}/vchiq_core.h     | 2 +-
>  .../interface/vchiq_arm => include/linux/vchiq}/vchiq_debugfs.h  | 0
>  18 files changed, 30 insertions(+), 25 deletions(-)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fe168477caa45799dfe07de2f54de6d6a1ce0615..f17ebb1fa51bd7e4dcb2ae1b0fced6d41685dc84 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4754,6 +4754,7 @@ T:	git https://github.com/broadcom/stblinux.git
>  F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>  F:	drivers/pci/controller/pcie-brcmstb.c
>  F:	drivers/staging/vc04_services
> +F:	include/linux/vchiq
>  N:	bcm2711
>  N:	bcm2712
>  N:	bcm283*
> diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
> index 0dbe76ee557032d7861acfc002cc203ff2e6971d..c49f2f7409b84ed6ebdd71787566efb1bc230f55 100644
> --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
> +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
> @@ -4,11 +4,12 @@
>  #include <linux/slab.h>
>  #include <linux/module.h>
>  #include <linux/completion.h>
> +
> +#include <linux/vchiq/vchiq_arm.h>

You can group this with the other headers above (ideally in alphabetical
order when #include statements are already sorted). Same comment where
applicable below.

With that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
>  #include "bcm2835.h"
>  #include "vc_vchi_audioserv_defs.h"
>  
> -#include "../interface/vchiq_arm/vchiq_arm.h"
> -
>  struct bcm2835_audio_instance {
>  	struct device *dev;
>  	unsigned int service_handle;
> diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> index b74cb104e9de00e7688a320949111a419cca084a..5011720940715c12a2d2fe58b40ed84dcb2e6824 100644
> --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> @@ -6,7 +6,8 @@
>  #include <linux/slab.h>
>  #include <linux/module.h>
>  
> -#include "../interface/vchiq_arm/vchiq_bus.h"
> +#include <linux/vchiq/vchiq_bus.h>
> +
>  #include "bcm2835.h"
>  
>  static bool enable_hdmi;
> diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
> index 49ec5b496edb4ba8634171b1390c4e15181e4048..7e63ef251c37269032fc20ae1237855245e5e0a7 100644
> --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
> +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
> @@ -5,13 +5,12 @@
>  #define __SOUND_ARM_BCM2835_H
>  
>  #include <linux/device.h>
> +#include <linux/vchiq/vchiq.h>
>  #include <linux/wait.h>
>  #include <sound/core.h>
>  #include <sound/pcm.h>
>  #include <sound/pcm-indirect.h>
>  
> -#include "../include/linux/raspberrypi/vchiq.h"
> -
>  #define MAX_SUBSTREAMS   (8)
>  #define AVAIL_SUBSTREAMS_MASK  (0xff)
>  
> diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> index fa7ea4ca4c36f4ec7f76f6ffbea9f45205116bb8..fcbbe1aa60b768e5a7a08a131f595a0457f4473a 100644
> --- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> +++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> @@ -26,7 +26,8 @@
>  #include <media/v4l2-common.h>
>  #include <linux/delay.h>
>  
> -#include "../interface/vchiq_arm/vchiq_bus.h"
> +#include <linux/vchiq/vchiq_bus.h>
> +
>  #include "../vchiq-mmal/mmal-common.h"
>  #include "../vchiq-mmal/mmal-encodings.h"
>  #include "../vchiq-mmal/mmal-vchiq.h"
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> index 721b15b7e13b9f25cee7619575bbfa1a4734cce8..10138c1454dd7fdcbab6b95ea41f8e1ac2defc4b 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> @@ -30,11 +30,12 @@
>  #include <linux/uaccess.h>
>  #include <soc/bcm2835/raspberrypi-firmware.h>
>  
> -#include "vchiq_core.h"
> +#include <linux/vchiq/vchiq_core.h>
> +#include <linux/vchiq/vchiq_arm.h>
> +#include <linux/vchiq/vchiq_bus.h>
> +#include <linux/vchiq/vchiq_debugfs.h>
> +
>  #include "vchiq_ioctl.h"
> -#include "vchiq_arm.h"
> -#include "vchiq_bus.h"
> -#include "vchiq_debugfs.h"
>  
>  #define DEVICE_NAME "vchiq"
>  
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_bus.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_bus.c
> index 41ece91ab88aa647a348910a0b913d0b28a8c761..5d55dbff82150a84b15483e71718c48f5cb8caea 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_bus.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_bus.c
> @@ -11,8 +11,8 @@
>  #include <linux/slab.h>
>  #include <linux/string.h>
>  
> -#include "vchiq_arm.h"
> -#include "vchiq_bus.h"
> +#include <linux/vchiq/vchiq_arm.h>
> +#include <linux/vchiq/vchiq_bus.h>
>  
>  static int vchiq_bus_type_match(struct device *dev, const struct device_driver *drv)
>  {
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
> index e2cac0898b8faa3c255de6b8562c7096a9683c49..ac0379f5f45dfa331dc2fec8d580d176f931cf2b 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
> @@ -15,8 +15,8 @@
>  #include <linux/rcupdate.h>
>  #include <linux/sched/signal.h>
>  
> -#include "vchiq_arm.h"
> -#include "vchiq_core.h"
> +#include <linux/vchiq/vchiq_arm.h>
> +#include <linux/vchiq/vchiq_core.h>
>  
>  #define VCHIQ_SLOT_HANDLER_STACK 8192
>  
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c
> index d5f7f61c5626934b819e8ff322e22ae3d6158b31..b1a8f1abafc2fa83132b1a02ba343d71315950de 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c
> @@ -5,9 +5,9 @@
>   */
>  
>  #include <linux/debugfs.h>
> -#include "vchiq_core.h"
> -#include "vchiq_arm.h"
> -#include "vchiq_debugfs.h"
> +#include <linux/vchiq/vchiq_core.h>
> +#include <linux/vchiq/vchiq_arm.h>
> +#include <linux/vchiq/vchiq_debugfs.h>
>  
>  #ifdef CONFIG_DEBUG_FS
>  
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_dev.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_dev.c
> index 3b20ba5c736221ce1cacfc9ce86eca623382a30b..781d6dd64ee33816b52b62f1f25bcd33363d8e02 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_dev.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_dev.c
> @@ -11,10 +11,11 @@
>  #include <linux/compat.h>
>  #include <linux/miscdevice.h>
>  
> -#include "vchiq_core.h"
> +#include <linux/vchiq/vchiq_core.h>
> +#include <linux/vchiq/vchiq_arm.h>
> +#include <linux/vchiq/vchiq_debugfs.h>
> +
>  #include "vchiq_ioctl.h"
> -#include "vchiq_arm.h"
> -#include "vchiq_debugfs.h"
>  
>  static const char *const ioctl_names[] = {
>  	"CONNECT",
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_ioctl.h b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_ioctl.h
> index afb71a83cfe7035e5dd61003fa99fd514ca18047..638469f18f859a0c7e738ef5bed7bf3c3ebebe59 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_ioctl.h
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_ioctl.h
> @@ -5,8 +5,7 @@
>  #define VCHIQ_IOCTLS_H
>  
>  #include <linux/ioctl.h>
> -
> -#include "../../include/linux/raspberrypi/vchiq.h"
> +#include <linux/vchiq/vchiq.h>
>  
>  #define VCHIQ_IOC_MAGIC 0xc4
>  #define VCHIQ_INVALID_HANDLE (~0)
> diff --git a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
> index 3fe482bd279390a7586c49bde00f38c61558ca8e..f5e141908b0f91ca4172d48aee37f0329d239d7c 100644
> --- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
> +++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
> @@ -22,11 +22,12 @@
>  #include <linux/mm.h>
>  #include <linux/slab.h>
>  #include <linux/completion.h>
> +#include <linux/vchiq/vchiq.h>
>  #include <linux/vmalloc.h>
>  #include <media/videobuf2-vmalloc.h>
>  
> -#include "../include/linux/raspberrypi/vchiq.h"
> -#include "../interface/vchiq_arm/vchiq_arm.h"
> +#include <linux/vchiq/vchiq_arm.h>
> +
>  #include "mmal-common.h"
>  #include "mmal-vchiq.h"
>  #include "mmal-msg.h"
> diff --git a/drivers/staging/vc04_services/include/linux/raspberrypi/vchiq.h b/include/linux/vchiq/vchiq.h
> similarity index 100%
> rename from drivers/staging/vc04_services/include/linux/raspberrypi/vchiq.h
> rename to include/linux/vchiq/vchiq.h
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h b/include/linux/vchiq/vchiq_arm.h
> similarity index 100%
> rename from drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h
> rename to include/linux/vchiq/vchiq_arm.h
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_bus.h b/include/linux/vchiq/vchiq_bus.h
> similarity index 100%
> rename from drivers/staging/vc04_services/interface/vchiq_arm/vchiq_bus.h
> rename to include/linux/vchiq/vchiq_bus.h
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_cfg.h b/include/linux/vchiq/vchiq_cfg.h
> similarity index 100%
> rename from drivers/staging/vc04_services/interface/vchiq_arm/vchiq_cfg.h
> rename to include/linux/vchiq/vchiq_cfg.h
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h b/include/linux/vchiq/vchiq_core.h
> similarity index 99%
> rename from drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h
> rename to include/linux/vchiq/vchiq_core.h
> index 9b4e766990a493d6e9d4e0604f2c84f4e7b77804..dbcb19e7a6d39b94967261c4ab23d6325e999249 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h
> +++ b/include/linux/vchiq/vchiq_core.h
> @@ -15,7 +15,7 @@
>  #include <linux/spinlock_types.h>
>  #include <linux/wait.h>
>  
> -#include "../../include/linux/raspberrypi/vchiq.h"
> +#include "vchiq.h"
>  #include "vchiq_cfg.h"
>  
>  /* Do this so that we can test-build the code on non-rpi systems */
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.h b/include/linux/vchiq/vchiq_debugfs.h
> similarity index 100%
> rename from drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.h
> rename to include/linux/vchiq/vchiq_debugfs.h
> 

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2025-08-27 12:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-27  6:24 [PATCH 0/5] staging: Destage VCHIQ interface and MMAL Jai Luthra
2025-08-27  6:24 ` [PATCH 1/5] include: linux: Destage VCHIQ interface headers Jai Luthra
2025-08-27 12:40   ` Laurent Pinchart [this message]
2025-08-27 14:33     ` Umang Jain
2025-08-27 19:05       ` Stefan Wahren
2025-08-28  2:17         ` Florian Fainelli
2025-08-28  6:19           ` Stefan Wahren
2025-09-03 13:48             ` Jai Luthra
2025-09-03 15:03               ` Stefan Wahren
2025-09-03 16:16                 ` Florian Fainelli
2025-09-03 16:13             ` Florian Fainelli
2025-08-27  6:24 ` [PATCH 2/5] staging: vc04_services: Cleanup formatting TODO entry Jai Luthra
2025-08-27 12:45   ` Laurent Pinchart
2025-08-27 18:55   ` Stefan Wahren
2025-08-27  6:24 ` [PATCH 3/5] platform/broadcom: Destage VCHIQ interface Jai Luthra
2025-08-27  6:24 ` [PATCH 4/5] media: staging: Drop bcm2835-camera driver Jai Luthra
2025-08-27 12:48   ` Laurent Pinchart
2025-08-27 19:18   ` Stefan Wahren
2025-09-01 10:59     ` Dave Stevenson
2025-09-03 13:40     ` Jai Luthra
2025-09-08 12:00       ` Stefan Wahren
2025-09-09 11:57         ` Peter Robinson
2025-08-27  6:24 ` [PATCH 5/5] platform/broadcom: Destage VCHIQ MMAL driver Jai Luthra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250827124016.GF5650@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jai.luthra@ideasonboard.com \
    --cc=kernel-list@raspberrypi.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=uajain@igalia.com \
    --cc=wahrenst@gmx.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®