From: Nishanth Menon <nm@ti.com>
To: Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>, David Airlie <airlied@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Neil Armstrong <neil.armstrong@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>,
Robert Nelson <robertcnelson@gmail.com>,
Jason Kridner <jkridner@beagleboard.org>, <afd@ti.com>,
<tomi.valkeinen@ideasonboard.com>, <devarsht@ti.com>,
<dmitry.baryshkov@oss.qualcomm.com>, Nishanth Menon <nm@ti.com>
Subject: [PATCH V5 4/5] drm/bridge: it66121: Use vid/pid to detect the type of chip
Date: Wed, 27 Aug 2025 15:23:53 -0500 [thread overview]
Message-ID: <20250827202354.2017972-5-nm@ti.com> (raw)
In-Reply-To: <20250827202354.2017972-1-nm@ti.com>
The driver knows exactly which version of the chip is present since
the vid/pid is used to enforce a compatibility. Given that some
devices like IT66121 has potentially been replaced with IT66122 mid
production for many platforms, it makes no sense to use the vid/pid
as an enforcement for compatibility. Instead, detect the ID of the
actual chip in use by matching the corresponding vid/pid and drop the
compatible specific lookup table.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
---
Changes since V4:
- Switched to ARRAY_SIZE, Dropped the null entry
- Picked up Andrew's Reviewed-by
V4: https://lore.kernel.org/all/20250819130807.3322536-5-nm@ti.com/
V3: https://lore.kernel.org/all/20250815034105.1276548-4-nm@ti.com/
V2: https://lore.kernel.org/all/20250813204106.580141-3-nm@ti.com/
drivers/gpu/drm/bridge/ite-it66121.c | 58 ++++++++++++++--------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it66121.c b/drivers/gpu/drm/bridge/ite-it66121.c
index cd74f3966560..1b2ef774c770 100644
--- a/drivers/gpu/drm/bridge/ite-it66121.c
+++ b/drivers/gpu/drm/bridge/ite-it66121.c
@@ -312,7 +312,7 @@ struct it66121_ctx {
u8 swl;
bool auto_cts;
} audio;
- const struct it66121_chip_info *info;
+ enum chip_id id;
};
static const struct regmap_range_cfg it66121_regmap_banks[] = {
@@ -402,7 +402,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
if (ret)
return ret;
- if (ctx->info->id == ID_IT66121) {
+ if (ctx->id == ID_IT66121) {
ret = regmap_write_bits(ctx->regmap, IT66121_AFE_IP_REG,
IT66121_AFE_IP_EC1, 0);
if (ret)
@@ -428,7 +428,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
if (ret)
return ret;
- if (ctx->info->id == ID_IT66121) {
+ if (ctx->id == ID_IT66121) {
ret = regmap_write_bits(ctx->regmap, IT66121_AFE_IP_REG,
IT66121_AFE_IP_EC1,
IT66121_AFE_IP_EC1);
@@ -449,7 +449,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
if (ret)
return ret;
- if (ctx->info->id == ID_IT6610) {
+ if (ctx->id == ID_IT6610) {
ret = regmap_write_bits(ctx->regmap, IT66121_AFE_XP_REG,
IT6610_AFE_XP_BYPASS,
IT6610_AFE_XP_BYPASS);
@@ -599,7 +599,7 @@ static int it66121_bridge_attach(struct drm_bridge *bridge,
if (ret)
return ret;
- if (ctx->info->id == ID_IT66121) {
+ if (ctx->id == ID_IT66121) {
ret = regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
IT66121_CLK_BANK_PWROFF_RCLK, 0);
if (ret)
@@ -748,7 +748,7 @@ static int it66121_bridge_check(struct drm_bridge *bridge,
{
struct it66121_ctx *ctx = container_of(bridge, struct it66121_ctx, bridge);
- if (ctx->info->id == ID_IT6610) {
+ if (ctx->id == ID_IT6610) {
/* The IT6610 only supports these settings */
bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH |
DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
@@ -802,7 +802,7 @@ void it66121_bridge_mode_set(struct drm_bridge *bridge,
if (regmap_write(ctx->regmap, IT66121_HDMI_MODE_REG, IT66121_HDMI_MODE_HDMI))
goto unlock;
- if (ctx->info->id == ID_IT66121 &&
+ if (ctx->id == ID_IT66121 &&
regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
IT66121_CLK_BANK_PWROFF_TXCLK,
IT66121_CLK_BANK_PWROFF_TXCLK)) {
@@ -815,7 +815,7 @@ void it66121_bridge_mode_set(struct drm_bridge *bridge,
if (it66121_configure_afe(ctx, adjusted_mode))
goto unlock;
- if (ctx->info->id == ID_IT66121 &&
+ if (ctx->id == ID_IT66121 &&
regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
IT66121_CLK_BANK_PWROFF_TXCLK, 0)) {
goto unlock;
@@ -1498,13 +1498,19 @@ static const char * const it66121_supplies[] = {
"vcn33", "vcn18", "vrf12"
};
+static const struct it66121_chip_info it66xx_chip_info[] = {
+ {.id = ID_IT6610, .vid = 0xca00, .pid = 0x0611 },
+ {.id = ID_IT66121, .vid = 0x4954, .pid = 0x0612 },
+};
+
static int it66121_probe(struct i2c_client *client)
{
u32 revision_id, vendor_ids[2] = { 0 }, device_ids[2] = { 0 };
struct device_node *ep;
- int ret;
+ int ret, i;
struct it66121_ctx *ctx;
struct device *dev = &client->dev;
+ const struct it66121_chip_info *chip_info;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(dev, "I2C check functionality failed.\n");
@@ -1522,7 +1528,6 @@ static int it66121_probe(struct i2c_client *client)
ctx->dev = dev;
ctx->client = client;
- ctx->info = i2c_get_match_data(client);
of_property_read_u32(ep, "bus-width", &ctx->bus_width);
of_node_put(ep);
@@ -1568,11 +1573,18 @@ static int it66121_probe(struct i2c_client *client)
revision_id = FIELD_GET(IT66121_REVISION_MASK, device_ids[1]);
device_ids[1] &= IT66121_DEVICE_ID1_MASK;
- if ((vendor_ids[1] << 8 | vendor_ids[0]) != ctx->info->vid ||
- (device_ids[1] << 8 | device_ids[0]) != ctx->info->pid) {
- return -ENODEV;
+ for (i = 0; i < ARRAY_SIZE(it66xx_chip_info); i++) {
+ chip_info = &it66xx_chip_info[i];
+ if ((vendor_ids[1] << 8 | vendor_ids[0]) == chip_info->vid &&
+ (device_ids[1] << 8 | device_ids[0]) == chip_info->pid) {
+ ctx->id = chip_info->id;
+ break;
+ }
}
+ if (i == ARRAY_SIZE(it66xx_chip_info))
+ return -ENODEV;
+
ctx->bridge.of_node = dev->of_node;
ctx->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
ctx->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
@@ -1606,28 +1618,16 @@ static void it66121_remove(struct i2c_client *client)
mutex_destroy(&ctx->lock);
}
-static const struct it66121_chip_info it66121_chip_info = {
- .id = ID_IT66121,
- .vid = 0x4954,
- .pid = 0x0612,
-};
-
-static const struct it66121_chip_info it6610_chip_info = {
- .id = ID_IT6610,
- .vid = 0xca00,
- .pid = 0x0611,
-};
-
static const struct of_device_id it66121_dt_match[] = {
- { .compatible = "ite,it6610", &it6610_chip_info },
- { .compatible = "ite,it66121", &it66121_chip_info },
+ { .compatible = "ite,it6610" },
+ { .compatible = "ite,it66121" },
{ }
};
MODULE_DEVICE_TABLE(of, it66121_dt_match);
static const struct i2c_device_id it66121_id[] = {
- { "it6610", (kernel_ulong_t)&it6610_chip_info },
- { "it66121", (kernel_ulong_t)&it66121_chip_info },
+ { .name = "it6610" },
+ { .name = "it66121" },
{ }
};
MODULE_DEVICE_TABLE(i2c, it66121_id);
--
2.47.0
next prev parent reply other threads:[~2025-08-27 20:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-27 20:23 [PATCH V5 0/5] drm/bridge: it66121: Add initial it66122 support Nishanth Menon
2025-08-27 20:23 ` [PATCH V5 1/5] dt-bindings: display: bridge: it66121: Add compatible string for IT66122 Nishanth Menon
2025-08-27 20:23 ` [PATCH V5 2/5] drm/bridge: it66121: Drop ftrace like dev_dbg() prints Nishanth Menon
2025-08-27 20:23 ` [PATCH V5 3/5] drm/bridge: it66121: Sort the compatibles Nishanth Menon
2025-08-27 20:23 ` Nishanth Menon [this message]
2025-08-27 20:23 ` [PATCH V5 5/5] drm/bridge: it66121: Add minimal it66122 support Nishanth Menon
2025-09-15 14:03 ` [PATCH V5 0/5] drm/bridge: it66121: Add initial " Nishanth Menon
2025-09-16 11:36 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250827202354.2017972-5-nm@ti.com \
--to=nm@ti.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=afd@ti.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jkridner@beagleboard.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robertcnelson@gmail.com \
--cc=robh@kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®