From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <lee@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <joel@jms.id.au>,
<andrew@codeconstruct.com.au>, <linus.walleij@linaro.org>,
<brgl@bgdev.pl>, <billy_tsai@aspeedtech.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<openbmc@lists.ozlabs.org>, <linux-gpio@vger.kernel.org>,
<BMC-SW@aspeedtech.com>
Subject: [PATCH v1 2/4] dt-bindings: pinctrl: aspeed: Add support for AST27xx
Date: Fri, 29 Aug 2025 15:30:28 +0800 [thread overview]
Message-ID: <20250829073030.2749482-3-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20250829073030.2749482-1-billy_tsai@aspeedtech.com>
Add bindings for the pin controller found in the ASPEED AST27xx SoC.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
.../pinctrl/aspeed,ast2700-soc0-pinctrl.yaml | 135 ++++++
.../pinctrl/aspeed,ast2700-soc1-pinctrl.yaml | 452 ++++++++++++++++++
2 files changed, 587 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc1-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml
new file mode 100644
index 000000000000..8abdc2fe1d8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2700 SoC0 Pin Controller
+
+maintainers:
+ - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node with the
+ required property:
+
+ - compatible: Should be one of the following:
+ "aspeed,ast2700-scu0", "syscon", "simple-mfd"
+
+ Refer to the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: aspeed,ast2700-soc0-pinctrl
+
+additionalProperties:
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ enum:
+ - EMMC
+ - VGADDC
+ - USB3A
+ - USB2A
+ - USB3B
+ - USB2B
+ - JTAG0
+ - PCIERC
+
+ groups:
+ enum:
+ - EMMCG1
+ - EMMCG4
+ - EMMCG8
+ - EMMCWPN
+ - EMMCCDN
+ - VGADDC
+ - USB3AXHD
+ - USB3AXHPD
+ - USB3AXH
+ - USB3AXHP
+ - USB3AXH2B
+ - USB3AXHP2B
+ - USB2AXHD1
+ - USB2AXHPD1
+ - USB2AD1
+ - USB2AXH
+ - USB2AXHP
+ - USB2AXH2B
+ - USB2AXHP2B
+ - USB2AHPD0
+ - USB2AD0
+ - USB2AH
+ - USB2AHP
+ - USB3BXHD
+ - USB3BXHPD
+ - USB3BXH
+ - USB3BXHP
+ - USB3BXH2A
+ - USB3BXHP2A
+ - USB2BXHD1
+ - USB2BXHPD1
+ - USB2BD1
+ - USB2BXH
+ - USB2BXHP
+ - USB2BXH2A
+ - USB2BXHP2A
+ - USB2BHPD0
+ - USB2BD0
+ - USB2BH
+ - USB2BHP
+ - JTAGM0
+ - PSP
+ - SSP
+ - TSP
+ - DDR
+ - USB3A
+ - USB3B
+ - PCIEA
+ - PCIEB
+ - PCIERC0PERST
+ - PCIERC1PERST
+
+ pins: true
+ drive-strength:
+ minimum: 0
+ maximum: 15
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+examples:
+ - |
+ / {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ syscon0: syscon@12c02000 {
+ compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
+ reg = <0x0 0x12c02000 0x0 0x1000>;
+ ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ pinctrl0: pinctrl{
+ compatible = "aspeed,ast2700-soc0-pinctrl";
+
+ pinctrl_emmc_default: emmc-default {
+ function = "EMMC";
+ groups = "EMMCG1";
+ };
+
+ pinctrl_emmcclk_driving: emmcclk-driving {
+ pins = "AC14";
+ drive-strength = <2>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc1-pinctrl.yaml
new file mode 100644
index 000000000000..1ee71c6290a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc1-pinctrl.yaml
@@ -0,0 +1,452 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2700-soc1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2700 SoC1 Pin Controller
+
+maintainers:
+ - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node with the
+ required property:
+
+ - compatible: Should be one of the following:
+ "aspeed,ast2700-scu1", "syscon", "simple-mfd"
+
+ Refer to the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: aspeed,ast2700-soc1-pinctrl
+
+additionalProperties:
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ enum:
+ - ADC0
+ - ADC1
+ - ADC2
+ - ADC3
+ - ADC4
+ - ADC5
+ - ADC6
+ - ADC7
+ - ADC8
+ - ADC9
+ - ADC10
+ - ADC11
+ - ADC12
+ - ADC13
+ - ADC14
+ - ADC15
+ - CANBUS
+ - DDR
+ - ESPI0
+ - ESPI1
+ - FSI0
+ - FSI1
+ - FSI2
+ - FSI3
+ - FWQSPI
+ - I2C0
+ - I2C1
+ - I2C2
+ - I2C3
+ - I2C4
+ - I2C5
+ - I2C6
+ - I2C7
+ - I2C8
+ - I2C9
+ - I2C10
+ - I2C11
+ - I2C12
+ - I2C13
+ - I2C14
+ - I2C15
+ - I3C0
+ - I3C1
+ - I3C2
+ - I3C3
+ - I3C4
+ - I3C5
+ - I3C6
+ - I3C7
+ - I3C8
+ - I3C9
+ - I3C10
+ - I3C11
+ - I3C12
+ - I3C13
+ - I3C14
+ - I3C15
+ - JTAGM0
+ - JTAGM1
+ - LPC0
+ - LPC1
+ - LTPI_PS_I2C0
+ - LTPI_PS_I2C1
+ - LTPI_PS_I2C2
+ - LTPI_PS_I2C3
+ - MDIO0
+ - MDIO1
+ - MDIO2
+ - NCTS5
+ - NDCD5
+ - NDSR5
+ - NRI5
+ - PCIERC
+ - PWM0
+ - PWM1
+ - PWM2
+ - PWM3
+ - PWM4
+ - PWM5
+ - PWM6
+ - PWM7
+ - PWM8
+ - PWM9
+ - PWM10
+ - PWM11
+ - PWM12
+ - PWM13
+ - PWM14
+ - PWM15
+ - QSPI0
+ - QSPI1
+ - QSPI2
+ - RGMII0
+ - RGMII1
+ - RMII0
+ - RMII0RCLKO
+ - RMII1
+ - RMII1RCLKO
+ - SALT0
+ - SALT1
+ - SALT2
+ - SALT3
+ - SALT4
+ - SALT5
+ - SALT6
+ - SALT7
+ - SALT8
+ - SALT9
+ - SALT10
+ - SALT11
+ - SALT12
+ - SALT13
+ - SALT14
+ - SALT15
+ - SD
+ - SGMII
+ - SGPM0
+ - SGPM1
+ - SGPS
+ - SPI0
+ - SPI0CS1
+ - SPI1
+ - SPI1CS1
+ - SPI2
+ - SPI2CS1
+ - SSP
+ - TACH0
+ - TACH1
+ - TACH2
+ - TACH3
+ - TACH4
+ - TACH5
+ - TACH6
+ - TACH7
+ - TACH8
+ - TACH9
+ - TACH10
+ - TACH11
+ - TACH12
+ - TACH13
+ - TACH14
+ - TACH15
+ - THRU0
+ - THRU1
+ - THRU2
+ - THRU3
+ - TSP
+ - UART0
+ - UART1
+ - UART2
+ - UART3
+ - UART5
+ - UART6
+ - UART7
+ - UART8
+ - UART9
+ - UART10
+ - UART11
+ - USB2C
+ - USB2D
+ - VPI
+
+ groups:
+ enum:
+ - ADC0
+ - ADC1
+ - ADC2
+ - ADC3
+ - ADC4
+ - ADC5
+ - ADC6
+ - ADC7
+ - ADC8
+ - ADC9
+ - ADC10
+ - ADC11
+ - ADC12
+ - ADC13
+ - ADC14
+ - ADC15
+ - CANBUS
+ - DI2C0
+ - DI2C1
+ - DI2C2
+ - DI2C3
+ - DI2C8
+ - DI2C9
+ - DI2C10
+ - DI2C11
+ - DI2C12
+ - DI2C13
+ - DI2C14
+ - DI2C15
+ - DSGPM0
+ - ESPI0
+ - ESPI1
+ - FSI0
+ - FSI1
+ - FSI2
+ - FSI3
+ - FWQSPI
+ - HVI3C0
+ - HVI3C1
+ - HVI3C2
+ - HVI3C3
+ - HVI3C12
+ - HVI3C13
+ - HVI3C14
+ - HVI3C15
+ - I2C0
+ - I2C1
+ - I2C2
+ - I2C3
+ - I2C4
+ - I2C5
+ - I2C6
+ - I2C7
+ - I2C8
+ - I2C9
+ - I2C10
+ - I2C11
+ - I2C12
+ - I2C13
+ - I2C14
+ - I2C15
+ - I3C4
+ - I3C5
+ - I3C6
+ - I3C7
+ - I3C8
+ - I3C9
+ - I3C10
+ - I3C11
+ - JTAGM1
+ - LPC0
+ - LPC1
+ - LTPI_PS_I2C0
+ - LTPI_PS_I2C1
+ - LTPI_PS_I2C2
+ - LTPI_PS_I2C3
+ - MDIO0
+ - MDIO1
+ - MDIO2
+ - NCTS0
+ - NCTS1
+ - NCTS5
+ - NCTS6
+ - NDCD0
+ - NDCD1
+ - NDCD5
+ - NDCD6
+ - NDSR0
+ - NDSR1
+ - NDSR5
+ - NDSR6
+ - NDTR0
+ - NDTR1
+ - NDTR5
+ - NDTR6
+ - NRI0
+ - NRI1
+ - NRI5
+ - NRI6
+ - NRTS0
+ - NRTS1
+ - NRTS5
+ - NRTS6
+ - PE2SGRSTN
+ - PWM0
+ - PWM1
+ - PWM2
+ - PWM3
+ - PWM4
+ - PWM5
+ - PWM6
+ - PWM7
+ - PWM8
+ - PWM9
+ - PWM10
+ - PWM11
+ - PWM12
+ - PWM13
+ - PWM14
+ - PWM15
+ - QSPI0
+ - QSPI1
+ - QSPI2
+ - RGMII0
+ - RGMII1
+ - RMII0
+ - RMII0RCLKO
+ - RMII1
+ - RMII1RCLKO
+ - RXD0
+ - RXD1
+ - RXD2
+ - RXD3
+ - RXD5
+ - RXD6
+ - RXD7
+ - RXD8
+ - RXD9
+ - RXD10
+ - RXD11
+ - SALT0
+ - SALT1
+ - SALT2
+ - SALT3
+ - SALT4
+ - SALT5
+ - SALT6
+ - SALT7
+ - SALT8
+ - SALT9
+ - SALT10
+ - SALT11
+ - SALT12
+ - SALT13
+ - SALT14
+ - SALT15
+ - SD
+ - SGMII
+ - SGPM0
+ - SGPM1
+ - SGPS
+ - SPI0
+ - SPI0CS1
+ - SPI1
+ - SPI1CS1
+ - SPI2
+ - SPI2CS1
+ - TACH0
+ - TACH1
+ - TACH2
+ - TACH3
+ - TACH4
+ - TACH5
+ - TACH6
+ - TACH7
+ - TACH8
+ - TACH9
+ - TACH10
+ - TACH11
+ - TACH12
+ - TACH13
+ - TACH14
+ - TACH15
+ - THRU0
+ - THRU1
+ - THRU2
+ - THRU3
+ - TXD0
+ - TXD1
+ - TXD2
+ - TXD3
+ - TXD5
+ - TXD6
+ - TXD7
+ - TXD8
+ - TXD9
+ - TXD10
+ - TXD11
+ - USB2CD
+ - USB2CH
+ - USB2CU
+ - USB2CUD
+ - USB2DD
+ - USB2DH
+ - VPI
+
+ pins: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+ drive-strength:
+ minimum: 0
+ maximum: 3
+ power-source:
+ enum: [1800, 3300]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+examples:
+ - |
+ / {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ syscon1: syscon@14c02000 {
+ compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
+ reg = <0x0 0x14c02000 0x0 0x1000>;
+ ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ pinctrl1: pinctrl {
+ compatible = "aspeed,ast2700-soc1-pinctrl";
+
+ pinctrl_hvi3c0_default: hvi3c0-default {
+ function = "I3C0";
+ groups = "HVI3C0";
+ };
+
+ pinctrl_i3c0_3_hv_voltage: i3chv-voltage {
+ pins = "U25";
+ power-source = <1800>;
+ };
+
+ pinctrl_i3c0_driving: i3c0-driving {
+ pins = "U25", "U26";
+ drive-strength = <2>;
+ };
+ };
+ };
+ };
--
2.25.1
next prev parent reply other threads:[~2025-08-29 7:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 7:30 [PATCH v1 0/4] Add pinctrl support for AST2700 SoC Billy Tsai
2025-08-29 7:30 ` [PATCH v1 1/4] dt-bindings: mfd: aspeed,ast2x00-scu: Support ast2700 pinctrl Billy Tsai
2025-08-29 7:30 ` Billy Tsai [this message]
2025-08-29 13:50 ` [PATCH v1 2/4] dt-bindings: pinctrl: aspeed: Add support for AST27xx Rob Herring (Arm)
2025-08-29 14:24 ` Rob Herring
2025-08-29 7:30 ` [PATCH v1 3/4] pinctrl: aspeed: Add AST2700 pinmux support Billy Tsai
2025-08-29 7:30 ` [PATCH v1 4/4] arm64: dts: add AST27xx pinctrl configuration nodes Billy Tsai
2025-08-29 14:27 ` [PATCH v1 0/4] Add pinctrl support for AST2700 SoC Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250829073030.2749482-3-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®