From: Akashdeep Kaur <a-kaur@ti.com>
To: <praneeth@ti.com>, <nm@ti.com>, <afd@ti.com>, <vigneshr@ti.com>,
<d-gole@ti.com>, <kristo@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <vishalm@ti.com>, <sebin.francis@ti.com>
Subject: [PATCH v2 2/3] arm64: dts: ti: k3-am62x-sk-common: Remove the unused config from USB1_DRVVBUS
Date: Mon, 1 Sep 2025 17:58:34 +0530 [thread overview]
Message-ID: <20250901122835.3022850-3-a-kaur@ti.com> (raw)
In-Reply-To: <20250901122835.3022850-1-a-kaur@ti.com>
After the SoC has entered the DeepSleep low power mode, USB1 can be
used to wakeup the SoC based on USB events triggered by USB devices.
This requires that the pin corresponding to the Type-A connector
remains pulled up even after the SoC has entered the DeepSleep low power
mode.
For that, either DeepSleep pullup can be selected or the pin can have the
same configuration that it had when SoC was in active mode.
In order for DeepSleep configuration to take effect, the DeepSleep
control bit has to be enabled.
Remove the DeepSleep state configuration from USB1_DRVBUS pin as it is
anyways not taking effect (DeepSleep control bit is not set).
This reverts commit 527f884d2d94981016e181dcbd4c4b5bf597c0ad.
Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 13e1d36123d51..d3bed23134ca0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -249,7 +249,7 @@ AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
main_usb1_pins_default: main-usb1-default-pins {
pinctrl-single,pins = <
- AM62X_IOPAD(0x0258, PIN_OUTPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (F18/E16) USB1_DRVVBUS */
+ AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
>;
};
--
2.34.1
next prev parent reply other threads:[~2025-09-01 12:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-01 12:28 [PATCH v2 0/3] Remove unused bits from dts and add support for remaining pinctrl macros Akashdeep Kaur
2025-09-01 12:28 ` [PATCH v2 1/3] arm64: dts: ti: k3-am62p5-sk: Remove the unused config from USB1_DRVVBUS Akashdeep Kaur
2025-09-01 12:28 ` Akashdeep Kaur [this message]
2025-09-01 12:28 ` [PATCH v2 3/3] arm64: dts: ti: k3-pinctrl: Add the remaining macros Akashdeep Kaur
2025-09-01 18:07 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250901122835.3022850-3-a-kaur@ti.com \
--to=a-kaur@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=d-gole@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=praneeth@ti.com \
--cc=robh@kernel.org \
--cc=sebin.francis@ti.com \
--cc=vigneshr@ti.com \
--cc=vishalm@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®