From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.oss.qualcomm.com@kernel.org>
To: "Manivannan Sadhasivam" <mani@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Saravana Kannan" <saravanak@google.com>
Cc: linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
Brian Norris <briannorris@chromium.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Subject: [PATCH v3 3/4] PCI: qcom: Parse PERST# from all PCIe bridge nodes
Date: Fri, 12 Sep 2025 14:05:03 +0530 [thread overview]
Message-ID: <20250912-pci-pwrctrl-perst-v3-3-3c0ac62b032c@oss.qualcomm.com> (raw)
In-Reply-To: <20250912-pci-pwrctrl-perst-v3-0-3c0ac62b032c@oss.qualcomm.com>
From: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Devicetree schema allows the PERST# GPIO to be present in all PCIe bridge
nodes, not just in Root Port node. But the current logic parses PERST# only
from the Root Port nodes. Though it is not causing any issue on the current
platforms, the upcoming platforms will have PERST# in PCIe switch
downstream ports also. So this requires parsing all the PCIe bridge nodes
for the PERST# GPIO.
Hence, rework the parsing logic to extend to all PCIe bridge nodes starting
from the Root Port node. If the 'reset-gpios' property is found for a PCI
bridge node, the GPIO descriptor will be stored in qcom_pcie_perst::desc
and added to the qcom_pcie_port::perst list.
It should be noted that if more than one bridge node has the same GPIO for
PERST# (shared PERST#), the driver will error out. This is due to the
limitation in the GPIOLIB subsystem that allows only exclusive (non-shared)
access to GPIOs from consumers. But this is soon going to get fixed. Once
that happens, it will get incorporated in this driver.
So for now, PERST# sharing is not supported.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 102 +++++++++++++++++++++++++++------
1 file changed, 85 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 6170c86f465f43f980f5b2f88bd8799c3c152e68..ccff01c31898cdbc5634221e7f8ef7e86469f5fd 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -267,10 +267,15 @@ struct qcom_pcie_cfg {
bool no_l0s;
};
+struct qcom_pcie_perst {
+ struct list_head list;
+ struct gpio_desc *desc;
+};
+
struct qcom_pcie_port {
struct list_head list;
- struct gpio_desc *reset;
struct phy *phy;
+ struct list_head perst;
};
struct qcom_pcie {
@@ -292,11 +297,14 @@ struct qcom_pcie {
static void qcom_perst_assert(struct qcom_pcie *pcie, bool assert)
{
+ struct qcom_pcie_perst *perst;
struct qcom_pcie_port *port;
int val = assert ? 1 : 0;
- list_for_each_entry(port, &pcie->ports, list)
- gpiod_set_value_cansleep(port->reset, val);
+ list_for_each_entry(port, &pcie->ports, list) {
+ list_for_each_entry(perst, &port->perst, list)
+ gpiod_set_value_cansleep(perst->desc, val);
+ }
usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
}
@@ -1670,18 +1678,58 @@ static const struct pci_ecam_ops pci_qcom_ecam_ops = {
}
};
-static int qcom_pcie_parse_port(struct qcom_pcie *pcie, struct device_node *node)
+/* Parse PERST# from all nodes in depth first manner starting from @np */
+static int qcom_pcie_parse_perst(struct qcom_pcie *pcie,
+ struct qcom_pcie_port *port,
+ struct device_node *np)
{
struct device *dev = pcie->pci->dev;
- struct qcom_pcie_port *port;
+ struct qcom_pcie_perst *perst;
struct gpio_desc *reset;
- struct phy *phy;
int ret;
- reset = devm_fwnode_gpiod_get(dev, of_fwnode_handle(node),
- "reset", GPIOD_OUT_HIGH, "PERST#");
- if (IS_ERR(reset))
+ if (!of_find_property(np, "reset-gpios", NULL))
+ goto parse_child_node;
+
+ reset = devm_fwnode_gpiod_get(dev, of_fwnode_handle(np), "reset",
+ GPIOD_OUT_HIGH, "PERST#");
+ if (IS_ERR(reset)) {
+ /*
+ * FIXME: GPIOLIB currently supports exclusive GPIO access only.
+ * Non exclusive access is broken. But shared PERST# requires
+ * non-exclusive access. So once GPIOLIB properly supports it,
+ * implement it here.
+ */
+ if (PTR_ERR(reset) == -EBUSY)
+ dev_err(dev, "Shared PERST# is not supported\n");
+
return PTR_ERR(reset);
+ }
+
+ perst = devm_kzalloc(dev, sizeof(*perst), GFP_KERNEL);
+ if (!perst)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&perst->list);
+ perst->desc = reset;
+ list_add_tail(&perst->list, &port->perst);
+
+parse_child_node:
+ for_each_available_child_of_node_scoped(np, child) {
+ ret = qcom_pcie_parse_perst(pcie, port, child);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int qcom_pcie_parse_port(struct qcom_pcie *pcie, struct device_node *node)
+{
+ struct device *dev = pcie->pci->dev;
+ struct qcom_pcie_port *port;
+ struct phy *phy;
+ int ret;
phy = devm_of_phy_get(dev, node, NULL);
if (IS_ERR(phy))
@@ -1695,7 +1743,12 @@ static int qcom_pcie_parse_port(struct qcom_pcie *pcie, struct device_node *node
if (ret)
return ret;
- port->reset = reset;
+ INIT_LIST_HEAD(&port->perst);
+
+ ret = qcom_pcie_parse_perst(pcie, port, node);
+ if (ret)
+ return ret;
+
port->phy = phy;
INIT_LIST_HEAD(&port->list);
list_add_tail(&port->list, &pcie->ports);
@@ -1705,9 +1758,10 @@ static int qcom_pcie_parse_port(struct qcom_pcie *pcie, struct device_node *node
static int qcom_pcie_parse_ports(struct qcom_pcie *pcie)
{
+ struct qcom_pcie_perst *perst, *tmp_perst;
+ struct qcom_pcie_port *port, *tmp_port;
struct device *dev = pcie->pci->dev;
- struct qcom_pcie_port *port, *tmp;
- int ret = -ENOENT;
+ int ret = -ENODEV;
for_each_available_child_of_node_scoped(dev->of_node, of_port) {
ret = qcom_pcie_parse_port(pcie, of_port);
@@ -1718,7 +1772,9 @@ static int qcom_pcie_parse_ports(struct qcom_pcie *pcie)
return ret;
err_port_del:
- list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+ list_for_each_entry_safe(port, tmp_port, &pcie->ports, list) {
+ list_for_each_entry_safe(perst, tmp_perst, &port->perst, list)
+ list_del(&perst->list);
phy_exit(port->phy);
list_del(&port->list);
}
@@ -1729,6 +1785,7 @@ static int qcom_pcie_parse_ports(struct qcom_pcie *pcie)
static int qcom_pcie_parse_legacy_binding(struct qcom_pcie *pcie)
{
struct device *dev = pcie->pci->dev;
+ struct qcom_pcie_perst *perst;
struct qcom_pcie_port *port;
struct gpio_desc *reset;
struct phy *phy;
@@ -1750,19 +1807,28 @@ static int qcom_pcie_parse_legacy_binding(struct qcom_pcie *pcie)
if (!port)
return -ENOMEM;
- port->reset = reset;
+ perst = devm_kzalloc(dev, sizeof(*perst), GFP_KERNEL);
+ if (!perst)
+ return -ENOMEM;
+
port->phy = phy;
INIT_LIST_HEAD(&port->list);
list_add_tail(&port->list, &pcie->ports);
+ perst->desc = reset;
+ INIT_LIST_HEAD(&port->perst);
+ INIT_LIST_HEAD(&perst->list);
+ list_add_tail(&perst->list, &port->perst);
+
return 0;
}
static int qcom_pcie_probe(struct platform_device *pdev)
{
+ struct qcom_pcie_perst *perst, *tmp_perst;
+ struct qcom_pcie_port *port, *tmp_port;
const struct qcom_pcie_cfg *pcie_cfg;
unsigned long max_freq = ULONG_MAX;
- struct qcom_pcie_port *port, *tmp;
struct device *dev = &pdev->dev;
struct dev_pm_opp *opp;
struct qcom_pcie *pcie;
@@ -1909,7 +1975,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
ret = qcom_pcie_parse_ports(pcie);
if (ret) {
- if (ret != -ENOENT) {
+ if (ret != -ENODEV) {
dev_err_probe(pci->dev, ret,
"Failed to parse Root Port: %d\n", ret);
goto err_pm_runtime_put;
@@ -1968,7 +2034,9 @@ static int qcom_pcie_probe(struct platform_device *pdev)
err_host_deinit:
dw_pcie_host_deinit(pp);
err_phy_exit:
- list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+ list_for_each_entry_safe(port, tmp_port, &pcie->ports, list) {
+ list_for_each_entry_safe(perst, tmp_perst, &port->perst, list)
+ list_del(&perst->list);
phy_exit(port->phy);
list_del(&port->list);
}
--
2.45.2
next prev parent reply other threads:[~2025-09-12 8:35 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-12 8:35 [PATCH v3 0/4] PCI/pwrctrl: Allow pwrctrl framework to control PERST# if available Manivannan Sadhasivam via B4 Relay
2025-09-12 8:35 ` [PATCH v3 1/4] PCI/pwrctrl: Add support for asserting/deasserting PERST# Manivannan Sadhasivam via B4 Relay
2025-09-12 8:35 ` [PATCH v3 2/4] PCI: qcom: Move host bridge 'phy' and 'reset' pointers to struct qcom_pcie_port Manivannan Sadhasivam via B4 Relay
2025-09-12 23:23 ` Bjorn Helgaas
2025-09-15 13:01 ` Manivannan Sadhasivam
2025-09-16 20:08 ` Bjorn Helgaas
2025-09-17 10:10 ` Manivannan Sadhasivam
2025-09-12 8:35 ` Manivannan Sadhasivam via B4 Relay [this message]
2025-09-12 23:28 ` [PATCH v3 3/4] PCI: qcom: Parse PERST# from all PCIe bridge nodes Bjorn Helgaas
2025-09-15 12:53 ` Manivannan Sadhasivam
2025-09-16 19:49 ` Bjorn Helgaas
2025-09-17 10:08 ` Manivannan Sadhasivam
2025-09-12 8:35 ` [PATCH v3 4/4] PCI: qcom: Allow pwrctrl core to control PERST# if 'reset-gpios' property is available Manivannan Sadhasivam via B4 Relay
2025-09-16 20:48 ` Bjorn Helgaas
2025-09-17 10:23 ` Manivannan Sadhasivam
2025-09-18 18:53 ` Bjorn Helgaas
2025-09-19 8:15 ` Manivannan Sadhasivam
2025-09-22 16:00 ` Bjorn Helgaas
2025-09-22 16:33 ` Manivannan Sadhasivam
2025-09-17 10:10 ` (subset) [PATCH v3 0/4] PCI/pwrctrl: Allow pwrctrl framework to control PERST# if available Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250912-pci-pwrctrl-perst-v3-3-3c0ac62b032c@oss.qualcomm.com \
--to=devnull+manivannan.sadhasivam.oss.qualcomm.com@kernel.org \
--cc=bhelgaas@google.com \
--cc=brgl@bgdev.pl \
--cc=briannorris@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=krishna.chundru@oss.qualcomm.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=manivannan.sadhasivam@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=saravanak@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®