Re: [PATCH V3] drm/bridge: ti-sn65dsi86: Add support for DisplayPort mode with HPD

[John Ripple <john.ripple@keysight.com>]

Hi, 

>As I said, maybe the problem is fixed now, but at the same time there
>is something nice about the interrupt type only being specified in one
>place. ...and IIRC the device tree validator gets upset if you don't
>specify the interrupt type there, so removing it from the source code
>seems nice...

My device tree does have interrupts already specified for the node, 
so allowing the driver to use that does seem like a good idea.

> [1] https://stackoverflow.com/questions/40011799/mapping-device-tree-interrupt-flags-to-devm-request-irq

The link you sent suggests just using "0" for the flag value lets the 
device tree flags to be used. I couldn't do this because the 
IRQF_ONESHOT needed to be passed as a flag or I'd get stack traces
every time the irq was triggered. Several of the other drivers in 
drivers/gpu/drm/bridge only pass IRQ_ONESHOT so I think those might be
using the device tree flags with the oneshot flag. As far as I could
tell, only passing the oneshot flag and setting the interrupt level
high in the device tree works.