From: Haibo Chen <haibo.chen@nxp.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Haibo Chen <haibo.chen@nxp.com>
Subject: [PATCH 2/2] arm64: dts: imx8mm/mn/mp: limit the max frequency of spi nor chip
Date: Tue, 16 Sep 2025 16:57:31 +0800 [thread overview]
Message-ID: <20250916-flexspi-dts-v1-2-61567f969165@nxp.com> (raw)
In-Reply-To: <20250916-flexspi-dts-v1-0-61567f969165@nxp.com>
The spi nor on imx8mm/mn/mp evk board works under SDR mode, and
driver use FlexSPIn_MCR0[RXCLKSRC] = 0x0 for SDR mode.
According to the datasheet, there is IO limitation on these chips,
the max frequency of such case is 66MHz, so add the limatation here
to align with datasheet.
Refer to 3.9.9 FlexSPI timing parameters on page 65.
https://www.nxp.com/docs/en/data-sheet/IMX8MNCEC.pdf
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index b68954bcc383cfc799877ff64c5d9a59dd863907..bb57c1db7c64adb20c996bbc2e3996e1fde5b98a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -47,7 +47,7 @@ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
- spi-max-frequency = <80000000>;
+ spi-max-frequency = <66000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 145355ff91b454795478b504eb403b0590848d46..fa43238e7b917a5b5f0bd9af96bd900f6dbacb8d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -199,7 +199,7 @@ flash0: flash@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <166000000>;
+ spi-max-frequency = <66000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 3730792daf5010213cbb9f6869a8110ea28eb48a..0b47d72cae9900ad53eed04c810a9ea8af795446 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -272,7 +272,7 @@ &flexspi {
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <80000000>;
+ spi-max-frequency = <66000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
--
2.34.1
next prev parent reply other threads:[~2025-09-16 8:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-16 8:57 [PATCH 0/2] few small change for flexspi setting in dts file Haibo Chen
2025-09-16 8:57 ` [PATCH 1/2] arm64: dts: correct the flexspi compatible string to match with yaml Haibo Chen
2025-09-16 9:42 ` Fabio Estevam
2025-09-16 8:57 ` Haibo Chen [this message]
2025-09-16 9:42 ` [PATCH 2/2] arm64: dts: imx8mm/mn/mp: limit the max frequency of spi nor chip Fabio Estevam
2025-09-16 10:03 ` Bough Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250916-flexspi-dts-v1-2-61567f969165@nxp.com \
--to=haibo.chen@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®