[PATCH] spi: spi-qpic-snand: simplify clock handling by using devm_clk_get_enabled()

[Gabor Juhos <j4g8y7@gmail.com>]

The devm_clk_get_enabled() function prepares and enables the
particular clock, which then automatically gets disabled and
unprepared on probe failure and on device removal.

Use that function instead of devm_clk_get() and remove the
clk_prepare_enable()/clk_disable_unprepare() calls in order
to simplify the code.

This also ensures that the clocks are handled in the correct
order during device removal.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
---
 drivers/spi/spi-qpic-snand.c | 29 +++--------------------------
 1 file changed, 3 insertions(+), 26 deletions(-)

diff --git a/drivers/spi/spi-qpic-snand.c b/drivers/spi/spi-qpic-snand.c
index 28755dbce399d836ab6209e44f02f05532386344..58ceea1ea8fb4e02b4c9989a38d1ea38520d88b0 100644
--- a/drivers/spi/spi-qpic-snand.c
+++ b/drivers/spi/spi-qpic-snand.c
@@ -1542,15 +1542,15 @@ static int qcom_spi_probe(struct platform_device *pdev)
 
 	snandc->props = dev_data;
 
-	snandc->core_clk = devm_clk_get(dev, "core");
+	snandc->core_clk = devm_clk_get_enabled(dev, "core");
 	if (IS_ERR(snandc->core_clk))
 		return PTR_ERR(snandc->core_clk);
 
-	snandc->aon_clk = devm_clk_get(dev, "aon");
+	snandc->aon_clk = devm_clk_get_enabled(dev, "aon");
 	if (IS_ERR(snandc->aon_clk))
 		return PTR_ERR(snandc->aon_clk);
 
-	snandc->qspi->iomacro_clk = devm_clk_get(dev, "iom");
+	snandc->qspi->iomacro_clk = devm_clk_get_enabled(dev, "iom");
 	if (IS_ERR(snandc->qspi->iomacro_clk))
 		return PTR_ERR(snandc->qspi->iomacro_clk);
 
@@ -1564,18 +1564,6 @@ static int qcom_spi_probe(struct platform_device *pdev)
 	if (dma_mapping_error(dev, snandc->base_dma))
 		return -ENXIO;
 
-	ret = clk_prepare_enable(snandc->core_clk);
-	if (ret)
-		goto err_dis_core_clk;
-
-	ret = clk_prepare_enable(snandc->aon_clk);
-	if (ret)
-		goto err_dis_aon_clk;
-
-	ret = clk_prepare_enable(snandc->qspi->iomacro_clk);
-	if (ret)
-		goto err_dis_iom_clk;
-
 	ret = qcom_nandc_alloc(snandc);
 	if (ret)
 		goto err_snand_alloc;
@@ -1616,12 +1604,6 @@ static int qcom_spi_probe(struct platform_device *pdev)
 err_spi_init:
 	qcom_nandc_unalloc(snandc);
 err_snand_alloc:
-	clk_disable_unprepare(snandc->qspi->iomacro_clk);
-err_dis_iom_clk:
-	clk_disable_unprepare(snandc->aon_clk);
-err_dis_aon_clk:
-	clk_disable_unprepare(snandc->core_clk);
-err_dis_core_clk:
 	dma_unmap_resource(dev, res->start, resource_size(res),
 			   DMA_BIDIRECTIONAL, 0);
 	return ret;
@@ -1636,11 +1618,6 @@ static void qcom_spi_remove(struct platform_device *pdev)
 	spi_unregister_controller(ctlr);
 	nand_ecc_unregister_on_host_hw_engine(&snandc->qspi->ecc_eng);
 	qcom_nandc_unalloc(snandc);
-
-	clk_disable_unprepare(snandc->aon_clk);
-	clk_disable_unprepare(snandc->core_clk);
-	clk_disable_unprepare(snandc->qspi->iomacro_clk);
-
 	dma_unmap_resource(&pdev->dev, snandc->base_dma, resource_size(res),
 			   DMA_BIDIRECTIONAL, 0);
 }

---
base-commit: b28a55db452edb1d997edee723d8dcbef7f065a3
change-id: 20250910-qpic-snand-devm_clk_get_enabled-6b71a9d6f2bb

Best regards,
-- 
Gabor Juhos <j4g8y7@gmail.com>