mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Leszczynski <konrad.leszczynski@intel.com>
To: davem@davemloft.net, andrew+netdev@lunn.ch, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	cezary.rojewski@intel.com, sebastian.basierski@intel.com,
	Piotr Warpechowski <piotr.warpechowski@intel.com>,
	Konrad Leszczynski <konrad.leszczynski@intel.com>
Subject: [PATCH net-next v3 3/3] net: stmmac: correct Tx descriptors debugfs prints
Date: Tue, 16 Sep 2025 14:48:08 +0200	[thread overview]
Message-ID: <20250916124808.218514-4-konrad.leszczynski@intel.com> (raw)
In-Reply-To: <20250916124808.218514-1-konrad.leszczynski@intel.com>

From: Piotr Warpechowski <piotr.warpechowski@intel.com>

It was observed that extended descriptors are not printed out fully and
enhanced descriptors are completely omitted in stmmac_rings_status_show().

Correct printing according to documentation and other existing prints in
the driver.

Reviewed-by: Konrad Leszczynski <konrad.leszczynski@intel.com>
Reviewed-by: Sebastian Basierski <sebastian.basierski@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Piotr Warpechowski <piotr.warpechowski@intel.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 31 ++++++++++++++-----
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4df967500cd3..38f130cb0c9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6355,14 +6355,25 @@ static void sysfs_display_ring(void *head, int size, int extend_desc,
 	desc_size = extend_desc ? sizeof(*ep) : sizeof(*p);
 	for (i = 0; i < size; i++) {
 		dma_addr = dma_phy_addr + i * desc_size;
-		seq_printf(seq, "%d [%pad]: 0x%x 0x%x 0x%x 0x%x\n",
-				i, &dma_addr,
-				le32_to_cpu(p->des0), le32_to_cpu(p->des1),
-				le32_to_cpu(p->des2), le32_to_cpu(p->des3));
-		if (extend_desc)
-			p = &(++ep)->basic;
-		else
+		if (extend_desc) {
+			seq_printf(seq, "%d [%pad]: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+				   i, &dma_addr,
+				   le32_to_cpu(ep->basic.des0),
+				   le32_to_cpu(ep->basic.des1),
+				   le32_to_cpu(ep->basic.des2),
+				   le32_to_cpu(ep->basic.des3),
+				   le32_to_cpu(ep->des4),
+				   le32_to_cpu(ep->des5),
+				   le32_to_cpu(ep->des6),
+				   le32_to_cpu(ep->des7));
+			ep++;
+		} else {
+			seq_printf(seq, "%d [%pad]: 0x%x 0x%x 0x%x 0x%x\n",
+				   i, &dma_addr,
+				   le32_to_cpu(p->des0), le32_to_cpu(p->des1),
+				   le32_to_cpu(p->des2), le32_to_cpu(p->des3));
 			p++;
+		}
 	}
 }
 
@@ -6402,7 +6413,11 @@ static int stmmac_rings_status_show(struct seq_file *seq, void *v)
 			seq_printf(seq, "Extended descriptor ring:\n");
 			sysfs_display_ring((void *)tx_q->dma_etx,
 					   priv->dma_conf.dma_tx_size, 1, seq, tx_q->dma_tx_phy);
-		} else if (!(tx_q->tbs & STMMAC_TBS_AVAIL)) {
+		} else if (tx_q->tbs & STMMAC_TBS_AVAIL) {
+			seq_printf(seq, "Enhanced descriptor ring:\n");
+			sysfs_display_ring((void *)tx_q->dma_entx,
+					   priv->dma_conf.dma_tx_size, 1, seq, tx_q->dma_tx_phy);
+		} else {
 			seq_printf(seq, "Descriptor ring:\n");
 			sysfs_display_ring((void *)tx_q->dma_tx,
 					   priv->dma_conf.dma_tx_size, 0, seq, tx_q->dma_tx_phy);
-- 
2.34.1


      parent reply	other threads:[~2025-09-16 12:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-16 12:48 [PATCH net-next v3 0/3] net: stmmac: new features Konrad Leszczynski
2025-09-16 12:48 ` [PATCH net-next v3 1/3] net: stmmac: enhance VLAN protocol detection for GRO Konrad Leszczynski
2025-09-17 14:54   ` Simon Horman
2025-09-16 12:48 ` [PATCH net-next v3 2/3] net: stmmac: add TC flower filter support for IP EtherType Konrad Leszczynski
2025-09-16 12:48 ` Konrad Leszczynski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250916124808.218514-4-konrad.leszczynski@intel.com \
    --to=konrad.leszczynski@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=cezary.rojewski@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=piotr.warpechowski@intel.com \
    --cc=sebastian.basierski@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®