mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vincent Mailhol <mailhol@kernel.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
	 Oliver Hartkopp <socketcan@hartkopp.net>
Cc: "Arunachalam Santhanam" <arunachalam.santhanam@in.bosch.com>,
	"Akshay Bhat" <akshay.bhat@timesys.com>,
	"Wolfgang Grandegger" <wg@grandegger.com>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Samuel Holland" <samuel@sholland.org>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Gerhard Bertelsmann" <info@gerhard-bertelsmann.de>,
	"Yasushi SHOJI" <yashi@spacecubics.com>,
	"Remigiusz Kołłątaj" <remigiusz.kollataj@mobica.com>,
	linux-can@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,
	"Vincent Mailhol" <mailhol@kernel.org>
Subject: [PATCH 3/4] can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
Date: Thu, 18 Sep 2025 18:00:26 +0900	[thread overview]
Message-ID: <20250918-can-fix-mtu-v1-3-0d1cada9393b@kernel.org> (raw)
In-Reply-To: <20250918-can-fix-mtu-v1-0-0d1cada9393b@kernel.org>

Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.

Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:

  $ ip link set can0 mtu 9999

After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:

	socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))

to inject a malicious CAN XL frames. For example:

	struct canxl_frame frame = {
		.flags = 0xff,
		.len = 2048,
	};

The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:

  1. the skb->protocol is set to ETH_P_CANXL which is valid (the
     function does not check the actual device capabilities).

  2. the length is a valid CAN XL length.

And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.

This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:

	dlc = cf->len;

Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:

	for (i = 0; i < dlc; i++)
		writel(cf->data[i], priv->base + (dreg + i * 4));

Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.

Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
---
 drivers/net/can/sun4i_can.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index 6fcb301ef611d0c8bdb8720aaa77dc78950123d6..53bfd873de9bdecaf6923049007f9efd71289dd3 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -768,6 +768,7 @@ static const struct net_device_ops sun4ican_netdev_ops = {
 	.ndo_open = sun4ican_open,
 	.ndo_stop = sun4ican_close,
 	.ndo_start_xmit = sun4ican_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct ethtool_ops sun4ican_ethtool_ops = {

-- 
2.49.1


  parent reply	other threads:[~2025-09-18  9:01 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-18  9:00 [PATCH 0/4] can: " Vincent Mailhol
2025-09-18  9:00 ` [PATCH 1/4] can: etas_es58x: " Vincent Mailhol
2025-09-18  9:00 ` [PATCH 2/4] can: hi311x: " Vincent Mailhol
2025-09-18  9:00 ` Vincent Mailhol [this message]
2025-09-18  9:00 ` [PATCH 4/4] can: mcba_usb: " Vincent Mailhol
2025-09-19 17:04 ` [PATCH 0/4] can: " Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250918-can-fix-mtu-v1-3-0d1cada9393b@kernel.org \
    --to=mailhol@kernel.org \
    --cc=akshay.bhat@timesys.com \
    --cc=arunachalam.santhanam@in.bosch.com \
    --cc=info@gerhard-bertelsmann.de \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mkl@pengutronix.de \
    --cc=mripard@kernel.org \
    --cc=remigiusz.kollataj@mobica.com \
    --cc=samuel@sholland.org \
    --cc=socketcan@hartkopp.net \
    --cc=wens@csie.org \
    --cc=wg@grandegger.com \
    --cc=yashi@spacecubics.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®