mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
To: Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	linux-arm-msm@vger.kernel.org,
	Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Subject: [PATCH v4 0/3] media: qcom: camss: Add sa8775p/qcs8300 camss TPG support
Date: Thu, 25 Sep 2025 08:31:58 +0800	[thread overview]
Message-ID: <20250925-camss_tpg-v4-0-d2eb099902c8@oss.qualcomm.com> (raw)

This series adds driver changes to bring up the TPG interfaces 
in SA8775P and QCS8300.

We have tested this on qcs9100-ride board and qcs8300-ride board with 
'Test Pattern Generator'. Unlike CSID TPG, this TPG can be seen as 
a combination of CSIPHY and sensor.

Tested with following commands:
- media-ctl --reset
- media-ctl -V '"msm_tpg0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -l '"msm_tpg0":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- v4l2-ctl -d /dev/v4l-subdev4 -c test_pattern=9
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4608x2592 /dev/video0
  --capture=7

Changes in V4:
- Rebase changes
- Use GENMASK to define bit fields and avoid using tabs. Use FIELD_PREP and FIELD_GET uniformly to access bit fields.
- Link to V3:https://lore.kernel.org/all/20250822-camss_tpg-v3-0-c7833a5f10d0@quicinc.com/

Changes in V3:
- Change the payload mode string
- Change the method for setting the TPG clock rate
- Remove the TPG IRQ
- Format correction
- Remove unused variables
- Merge functions and eliminate redundancy
- Modify the register write method
- Change TPG matching method to use grp_id
- Encapsulate magic numbers as macros
- Link to V2: https://lore.kernel.org/all/20250717-lemans_tpg-v2-0-a2538659349c@quicinc.com/

Changes in V2:
- rebase tpg changes based on new versions of sa8775p and qcs8300 camss patches
- Link to V1: https://lore.kernel.org/all/20250211-sa8775p_tpg-v1-0-3f76c5f8431f@quicinc.com/

---
Wenmeng Liu (3):
      media: qcom: camss: Add support for TPG common
      media: qcom: camss: Add link support for TPG common
      media: qcom: camss: tpg: Add TPG support for SA8775P and QCS8300

 drivers/media/platform/qcom/camss/Makefile         |   2 +
 .../media/platform/qcom/camss/camss-csid-gen3.c    |  17 +
 drivers/media/platform/qcom/camss/camss-csid.c     |  43 +-
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 drivers/media/platform/qcom/camss/camss-csiphy.h   |   2 +
 drivers/media/platform/qcom/camss/camss-tpg-gen1.c | 219 +++++++
 drivers/media/platform/qcom/camss/camss-tpg.c      | 696 +++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss-tpg.h      | 125 ++++
 drivers/media/platform/qcom/camss/camss.c          | 131 ++++
 drivers/media/platform/qcom/camss/camss.h          |   5 +
 10 files changed, 1227 insertions(+), 14 deletions(-)
---
base-commit: ce7f1a983b074f6cf8609068088ca3182c569ee4
change-id: 20250924-camss_tpg-0cab6ce6372a

Best regards,
-- 
Wenmeng <wenmeng.liu@oss.qualcomm.com>


             reply	other threads:[~2025-09-25  0:32 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-25  0:31 Wenmeng Liu [this message]
2025-09-25  0:31 ` [PATCH v4 1/3] media: qcom: camss: Add support for TPG common Wenmeng Liu
2025-10-07 10:44   ` Konrad Dybcio
2025-10-16 12:55     ` Wenmeng Liu
2025-09-25  0:32 ` [PATCH v4 2/3] media: qcom: camss: Add link " Wenmeng Liu
2025-09-25  0:32 ` [PATCH v4 3/3] media: qcom: camss: tpg: Add TPG support for SA8775P and QCS8300 Wenmeng Liu
2025-09-26  6:08   ` kernel test robot
2025-10-08 10:50   ` Konrad Dybcio
2025-10-16 12:56     ` Wenmeng Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250925-camss_tpg-v4-0-d2eb099902c8@oss.qualcomm.com \
    --to=wenmeng.liu@oss.qualcomm.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rfoss@kernel.org \
    --cc=todor.too@gmail.com \
    --cc=vladimir.zapolskiy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®