From: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
To: Georgi Djakov <djakov@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>,
Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Mike Tipton <mike.tipton@oss.qualcomm.com>
Subject: [PATCH v2 3/3] arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
Date: Wed, 1 Oct 2025 13:03:44 +0530 [thread overview]
Message-ID: <20251001073344.6599-4-odelu.kukatla@oss.qualcomm.com> (raw)
In-Reply-To: <20251001073344.6599-1-odelu.kukatla@oss.qualcomm.com>
Add register addresses and clocks which need to be enabled for
configuring QoS on sa8775p SoC.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans.dtsi | 163 +++++++++++++++------------
1 file changed, 91 insertions(+), 72 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index cf685cb186ed..3a02a515af0d 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -518,90 +518,18 @@
};
};
- aggre1_noc: interconnect-aggre1-noc {
- compatible = "qcom,sa8775p-aggre1-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- aggre2_noc: interconnect-aggre2-noc {
- compatible = "qcom,sa8775p-aggre2-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
clk_virt: interconnect-clk-virt {
compatible = "qcom,sa8775p-clk-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
- config_noc: interconnect-config-noc {
- compatible = "qcom,sa8775p-config-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- dc_noc: interconnect-dc-noc {
- compatible = "qcom,sa8775p-dc-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- gem_noc: interconnect-gem-noc {
- compatible = "qcom,sa8775p-gem-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- gpdsp_anoc: interconnect-gpdsp-anoc {
- compatible = "qcom,sa8775p-gpdsp-anoc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- lpass_ag_noc: interconnect-lpass-ag-noc {
- compatible = "qcom,sa8775p-lpass-ag-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
mc_virt: interconnect-mc-virt {
compatible = "qcom,sa8775p-mc-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
- mmss_noc: interconnect-mmss-noc {
- compatible = "qcom,sa8775p-mmss-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- nspa_noc: interconnect-nspa-noc {
- compatible = "qcom,sa8775p-nspa-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- nspb_noc: interconnect-nspb-noc {
- compatible = "qcom,sa8775p-nspb-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- pcie_anoc: interconnect-pcie-anoc {
- compatible = "qcom,sa8775p-pcie-anoc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- system_noc: interconnect-system-noc {
- compatible = "qcom,sa8775p-system-noc";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
/* Will be updated by the bootloader. */
memory@80000000 {
device_type = "memory";
@@ -2689,6 +2617,62 @@
reg = <0 0x010d2000 0 0x1000>;
};
+ config_noc: interconnect@14c0000 {
+ compatible = "qcom,sa8775p-config-noc";
+ reg = <0x0 0x014c0000 0x0 0x13080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,sa8775p-system-noc";
+ reg = <0x0 0x01680000 0x0 0x15080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16c0000 {
+ compatible = "qcom,sa8775p-aggre1-noc";
+ reg = <0x0 0x016c0000 0x0 0x18080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sa8775p-aggre2-noc";
+ reg = <0x0 0x01700000 0x0 0x1b080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
+ <&rpmhcc RPMH_IPA_CLK>;
+ };
+
+ pcie_anoc: interconnect@1760000 {
+ compatible = "qcom,sa8775p-pcie-anoc";
+ reg = <0x0 0x01760000 0x0 0xc080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gpdsp_anoc: interconnect@1780000 {
+ compatible = "qcom,sa8775p-gpdsp-anoc";
+ reg = <0x0 0x01780000 0x0 0xe080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@17a0000 {
+ compatible = "qcom,sa8775p-mmss-noc";
+ reg = <0x0 0x017a0000 0x0 0x40000>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x0 0x01d84000 0x0 0x3000>;
@@ -2769,6 +2753,13 @@
<&apps_smmu 0x481 0x00>;
};
+ lpass_ag_noc: interconnect@3c40000 {
+ compatible = "qcom,sa8775p-lpass-ag-noc";
+ reg = <0x0 0x03c40000 0x0 0x17200>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ctcu@4001000 {
compatible = "qcom,sa8775p-ctcu";
reg = <0x0 0x04001000 0x0 0x1000>;
@@ -3925,6 +3916,20 @@
status = "disabled";
};
+ dc_noc: interconnect@90e0000 {
+ compatible = "qcom,sa8775p-dc-noc";
+ reg = <0x0 0x090e0000 0x0 0x5080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@9100000 {
+ compatible = "qcom,sa8775p-gem-noc";
+ reg = <0x0 0x09100000 0x0 0xf6080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
usb_0: usb@a600000 {
compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
reg = <0 0x0a600000 0 0xfc100>;
@@ -6875,6 +6880,13 @@
status = "disabled";
};
+ nspa_noc: interconnect@260c0000 {
+ compatible = "qcom,sa8775p-nspa-noc";
+ reg = <0x0 0x260c0000 0x0 0x16080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
remoteproc_cdsp0: remoteproc@26300000 {
compatible = "qcom,sa8775p-cdsp0-pas";
reg = <0x0 0x26300000 0x0 0x10000>;
@@ -7007,6 +7019,13 @@
};
};
+ nspb_noc: interconnect@2a0c0000 {
+ compatible = "qcom,sa8775p-nspb-noc";
+ reg = <0x0 0x2a0c0000 0x0 0x16080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
remoteproc_cdsp1: remoteproc@2a300000 {
compatible = "qcom,sa8775p-cdsp1-pas";
reg = <0x0 0x2A300000 0x0 0x10000>;
--
2.17.1
next prev parent reply other threads:[~2025-10-01 7:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-01 7:33 [PATCH v2 0/3] Enable QoS configuration on SA8775P Odelu Kukatla
2025-10-01 7:33 ` [PATCH v2 1/3] dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p Odelu Kukatla
2025-10-08 13:24 ` Rob Herring (Arm)
2025-11-04 3:03 ` Bjorn Andersson
2025-10-01 7:33 ` [PATCH v2 2/3] interconnect: qcom: sa8775p: enable QoS configuration Odelu Kukatla
2025-10-04 6:20 ` Dmitry Baryshkov
2025-10-01 7:33 ` Odelu Kukatla [this message]
2025-10-04 6:45 ` [PATCH v2 3/3] arm64: dts: qcom: sa8775p: Add reg and clocks for " Dmitry Baryshkov
2026-01-15 3:00 ` (subset) [PATCH v2 0/3] Enable QoS configuration on SA8775P Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251001073344.6599-4-odelu.kukatla@oss.qualcomm.com \
--to=odelu.kukatla@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mike.tipton@oss.qualcomm.com \
--cc=raviteja.laggyshetty@oss.qualcomm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®