From: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
To: angelogioacchino.delregno@collabora.com,
ariel.dalessandro@collabora.com, broonie@kernel.org,
conor+dt@kernel.org, krzk+dt@kernel.org, lgirdwood@gmail.com,
robh@kernel.org, support.opensource@diasemi.com
Cc: devicetree@vger.kernel.org, kernel@collabora.com,
linux-kernel@vger.kernel.org
Subject: [PATCH v3] dt-bindings: regulator: Convert Dialog DA9211 Regulators to DT schema
Date: Wed, 1 Oct 2025 15:36:48 -0300 [thread overview]
Message-ID: <20251001183648.83379-1-ariel.dalessandro@collabora.com> (raw)
Convert the existing text-based DT bindings for Dialog Semiconductor DA9211
Voltage Regulators family to a DT schema. Examples are simplified, as these
are all equal.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
.../devicetree/bindings/regulator/da9211.txt | 205 ------------------
.../bindings/regulator/dlg,da9211.yaml | 103 +++++++++
2 files changed, 103 insertions(+), 205 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/da9211.txt
create mode 100644 Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
deleted file mode 100644
index eb871447d5082..0000000000000
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
- Voltage Regulator
-
-Required properties:
-- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
- or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225"
-- reg: I2C slave address, usually 0x68.
-- interrupts: the interrupt outputs of the controller
-- regulators: A node that houses a sub-node for each regulator within the
- device. Each sub-node is identified using the node's name, with valid
- values listed below. The content of each sub-node is defined by the
- standard binding for regulators; see regulator.txt.
- BUCKA and BUCKB.
-
-Optional properties:
-- enable-gpios: platform gpio for control of BUCKA/BUCKB.
-- Any optional property defined in regulator.txt
- - regulator-initial-mode and regulator-allowed-modes may be specified using
- mode values from dt-bindings/regulator/dlg,da9211-regulator.h
-
-Example 1) DA9211
- pmic: da9211@68 {
- compatible = "dlg,da9211";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <2000000>;
- regulator-max-microamp = <5000000>;
- enable-gpios = <&gpio 27 0>;
- regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
- DA9211_BUCK_MODE_AUTO>;
- };
- };
- };
-
-Example 2) DA9212
- pmic: da9212@68 {
- compatible = "dlg,da9212";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <2000000>;
- regulator-max-microamp = <5000000>;
- enable-gpios = <&gpio 27 0>;
- };
- BUCKB {
- regulator-name = "VBUCKB";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <2000000>;
- regulator-max-microamp = <5000000>;
- enable-gpios = <&gpio 17 0>;
- };
- };
- };
-
-Example 3) DA9213
- pmic: da9213@68 {
- compatible = "dlg,da9213";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <6000000>;
- enable-gpios = <&gpio 27 0>;
- };
- };
- };
-
-Example 4) DA9223
- pmic: da9223@68 {
- compatible = "dlg,da9223";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <6000000>;
- enable-gpios = <&gpio 27 0>;
- };
- };
- };
-
-Example 5) DA9214
- pmic: da9214@68 {
- compatible = "dlg,da9214";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <6000000>;
- enable-gpios = <&gpio 27 0>;
- };
- BUCKB {
- regulator-name = "VBUCKB";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <6000000>;
- enable-gpios = <&gpio 17 0>;
- };
- };
- };
-
-Example 6) DA9224
- pmic: da9224@68 {
- compatible = "dlg,da9224";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <6000000>;
- enable-gpios = <&gpio 27 0>;
- };
- BUCKB {
- regulator-name = "VBUCKB";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <6000000>;
- enable-gpios = <&gpio 17 0>;
- };
- };
- };
-
-Example 7) DA9215
- pmic: da9215@68 {
- compatible = "dlg,da9215";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <4000000>;
- regulator-max-microamp = <7000000>;
- enable-gpios = <&gpio 27 0>;
- };
- BUCKB {
- regulator-name = "VBUCKB";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <4000000>;
- regulator-max-microamp = <7000000>;
- enable-gpios = <&gpio 17 0>;
- };
- };
- };
-
-Example 8) DA9225
- pmic: da9225@68 {
- compatible = "dlg,da9225";
- reg = <0x68>;
- interrupts = <3 27>;
-
- regulators {
- BUCKA {
- regulator-name = "VBUCKA";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <4000000>;
- regulator-max-microamp = <7000000>;
- enable-gpios = <&gpio 27 0>;
- };
- BUCKB {
- regulator-name = "VBUCKB";
- regulator-min-microvolt = < 300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <4000000>;
- regulator-max-microamp = <7000000>;
- enable-gpios = <&gpio 17 0>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
new file mode 100644
index 0000000000000..4d7e495a6f599
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,da9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Dialog Semiconductor DA9211-9215, DA9223-9225 Voltage Regulators
+
+maintainers:
+ - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+properties:
+ compatible:
+ enum:
+ - dlg,da9211
+ - dlg,da9212
+ - dlg,da9213
+ - dlg,da9214
+ - dlg,da9215
+ - dlg,da9223
+ - dlg,da9224
+ - dlg,da9225
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ type: object
+ additionalProperties: false
+ description:
+ List of regulators provided by the device
+
+ patternProperties:
+ "^BUCK([AB])$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ Properties for a single BUCK regulator
+
+ properties:
+ regulator-initial-mode:
+ items:
+ enum: [ 1, 2, 3 ]
+ description:
+ Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
+
+ regulator-allowed-modes:
+ items:
+ enum: [ 1, 2, 3 ]
+ description:
+ Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
+
+ enable-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/regulator/dlg,da9211-regulator.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@68 {
+ compatible = "dlg,da9212";
+ reg = <0x68>;
+ interrupts = <3 27>;
+
+ regulators {
+ BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <5000000>;
+ enable-gpios = <&gpio 27 0>;
+ };
+ BUCKB {
+ regulator-name = "VBUCKB";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <5000000>;
+ enable-gpios = <&gpio 17 0>;
+ };
+ };
+ };
+ };
+
+...
--
2.51.0
next reply other threads:[~2025-10-01 18:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-01 18:36 Ariel D'Alessandro [this message]
2025-10-15 9:50 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251001183648.83379-1-ariel.dalessandro@collabora.com \
--to=ariel.dalessandro@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®