[PATCH] drm/bridge: sii902x: Fix HDMI detection with DRM_BRIDGE_ATTACH_NO_CONNECTOR

[Devarsh Thakkar <devarsht@ti.com>]

The SII902x HDMI bridge driver wasn't working properly with drivers that
use the newer bridge connector architecture with the
DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, like TIDSS.  This caused HDMI audio to
fail since the driver wasn't properly setting the sink_is_hdmi flag when
the bridge was attached without a connector since .get_modes() is never
called in this case. Fix it by setting sink_is_hdmi flag when reading
the EDID block itself.

Fixes: 3de47e1309c2 ("drm/bridge: sii902x: use display info is_hdmi")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
---
 drivers/gpu/drm/bridge/sii902x.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index d537b1d036fb..3d169b9fac70 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -292,10 +292,16 @@ static const struct drm_edid *sii902x_edid_read(struct sii902x *sii902x,
 						struct drm_connector *connector)
 {
 	const struct drm_edid *drm_edid;
+	const struct edid *edid;
 
 	mutex_lock(&sii902x->mutex);
 
 	drm_edid = drm_edid_read_ddc(connector, sii902x->i2cmux->adapter[0]);
+	if (drm_edid) {
+		edid = drm_edid_raw(drm_edid);
+		if (edid && drm_detect_hdmi_monitor(edid))
+			sii902x->sink_is_hdmi = true;
+	}
 
 	mutex_unlock(&sii902x->mutex);
 
@@ -315,8 +321,6 @@ static int sii902x_get_modes(struct drm_connector *connector)
 		drm_edid_free(drm_edid);
 	}
 
-	sii902x->sink_is_hdmi = connector->display_info.is_hdmi;
-
 	return num;
 }
 
-- 
2.39.1