From: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
To: <wim@linux-watchdog.org>, <linux@roeck-us.net>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <joel@jms.id.au>,
<andrew@codeconstruct.com.au>, <linux-watchdog@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<BMC-SW@aspeedtech.com>
Subject: [PATCH 1/3] dt-bindings: watchdog: aspeed,ast2400-wdt: Add support for AST2700
Date: Tue, 7 Oct 2025 16:36:48 +0800 [thread overview]
Message-ID: <20251007083650.2155317-2-chin-ting_kuo@aspeedtech.com> (raw)
In-Reply-To: <20251007083650.2155317-1-chin-ting_kuo@aspeedtech.com>
Add support for the AST2700 SoC in the ASPEED watchdog device tree
bindings. This includes:
- Adding "aspeed,ast2700-wdt" to the compatible string list.
- Extending the "aspeed,reset-mask" property description for AST2700.
- Defining AST2700-specific reset mask bits in aspeed-wdt.h,
covering RESET1 to RESET5.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
---
.../bindings/watchdog/aspeed,ast2400-wdt.yaml | 8 +-
include/dt-bindings/watchdog/aspeed-wdt.h | 138 ++++++++++++++++++
2 files changed, 144 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
index be78a9865584..9322cb5b462a 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
@@ -15,6 +15,7 @@ properties:
- aspeed,ast2400-wdt
- aspeed,ast2500-wdt
- aspeed,ast2600-wdt
+ - aspeed,ast2700-wdt
reg:
maxItems: 1
@@ -87,13 +88,15 @@ properties:
aspeed,reset-mask:
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
- maxItems: 2
+ maxItems: 5
description: >
A bitmask indicating which peripherals will be reset if the watchdog
timer expires. On AST2500 SoCs this should be a single word defined using
the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
array with the first word defined using the AST2600_WDT_RESET1_* macros,
- and the second word defined using the AST2600_WDT_RESET2_* macros.
+ and the second word defined using the AST2600_WDT_RESET2_* macros; on
+ AST2700 SoCs, this should be five-word array from AST2700_WDT_RESET1_*
+ macros to AST2700_WDT_RESET5_* macros.
required:
- compatible
@@ -114,6 +117,7 @@ allOf:
enum:
- aspeed,ast2500-wdt
- aspeed,ast2600-wdt
+ - aspeed,ast2700-wdt
- if:
required:
- aspeed,ext-active-high
diff --git a/include/dt-bindings/watchdog/aspeed-wdt.h b/include/dt-bindings/watchdog/aspeed-wdt.h
index 7ae6d84b2bd9..89fa31ffce2d 100644
--- a/include/dt-bindings/watchdog/aspeed-wdt.h
+++ b/include/dt-bindings/watchdog/aspeed-wdt.h
@@ -89,4 +89,142 @@
#define AST2600_WDT_RESET2_DEFAULT 0x03fffff1
+#define AST2700_WDT_RESET1_CPU (1 << 0)
+#define AST2700_WDT_RESET1_DRAM (1 << 1)
+#define AST2700_WDT_RESET1_SLI0 (1 << 2)
+#define AST2700_WDT_RESET1_EHCI (1 << 3)
+#define AST2700_WDT_RESET1_HACE (1 << 4)
+#define AST2700_WDT_RESET1_SOC_MISC0 (1 << 5)
+#define AST2700_WDT_RESET1_VIDEO (1 << 6)
+#define AST2700_WDT_RESET1_2D_GRAPHIC (1 << 7)
+#define AST2700_WDT_RESET1_RAVS0 (1 << 8)
+#define AST2700_WDT_RESET1_RAVS1 (1 << 9)
+#define AST2700_WDT_RESET1_GPIO0 (1 << 10)
+#define AST2700_WDT_RESET1_SSP (1 << 11)
+#define AST2700_WDT_RESET1_TSP (1 << 12)
+#define AST2700_WDT_RESET1_CRT (1 << 13)
+#define AST2700_WDT_RESET1_USB20_HOST (1 << 14)
+#define AST2700_WDT_RESET1_USB11_HOST (1 << 15)
+#define AST2700_WDT_RESET1_UFS (1 << 16)
+#define AST2700_WDT_RESET1_EMMC (1 << 17)
+#define AST2700_WDT_RESET1_AHB_TO_PCIE1 (1 << 18)
+#define AST2700_WDT_RESET1_XDMA0 (1 << 22)
+#define AST2700_WDT_RESET1_MCTP1 (1 << 23)
+#define AST2700_WDT_RESET1_MCTP0 (1 << 24)
+#define AST2700_WDT_RESET1_JTAG0 (1 << 25)
+#define AST2700_WDT_RESET1_ECC (1 << 26)
+#define AST2700_WDT_RESET1_XDMA1 (1 << 27)
+#define AST2700_WDT_RESET1_DP (1 << 28)
+#define AST2700_WDT_RESET1_DP_MCU (1 << 29)
+#define AST2700_WDT_RESET1_AHB_TO_PCIE0 (1 << 31)
+
+#define AST2700_WDT_RESET1_DEFAULT 0x8207ff71
+
+#define AST2700_WDT_RESET2_USB3_A_HOST (1 << 0)
+#define AST2700_WDT_RESET2_USB3_A_VHUB3 (1 << 1)
+#define AST2700_WDT_RESET2_USB3_A_VHUB2 (1 << 2)
+#define AST2700_WDT_RESET2_USB3_B_HOST (1 << 3)
+#define AST2700_WDT_RESET2_USB3_B_VHUB3 (1 << 4)
+#define AST2700_WDT_RESET2_USB3_B_VHUB2 (1 << 5)
+#define AST2700_WDT_RESET2_SM3 (1 << 6)
+#define AST2700_WDT_RESET2_SM4 (1 << 7)
+#define AST2700_WDT_RESET2_SHA3 (1 << 8)
+#define AST2700_WDT_RESET2_RSA (1 << 9)
+
+#define AST2700_WDT_RESET2_DEFAULT 0x000003f6
+
+#define AST2700_WDT_RESET3_LPC0 (1 << 0)
+#define AST2700_WDT_RESET3_LPC1 (1 << 1)
+#define AST2700_WDT_RESET3_MDIO (1 << 2)
+#define AST2700_WDT_RESET3_PECI (1 << 3)
+#define AST2700_WDT_RESET3_PWM (1 << 4)
+#define AST2700_WDT_RESET3_MAC0 (1 << 5)
+#define AST2700_WDT_RESET3_MAC1 (1 << 6)
+#define AST2700_WDT_RESET3_MAC2 (1 << 7)
+#define AST2700_WDT_RESET3_ADC (1 << 8)
+#define AST2700_WDT_RESET3_SDC (1 << 9)
+#define AST2700_WDT_RESET3_ESPI0 (1 << 10)
+#define AST2700_WDT_RESET3_ESPI1 (1 << 11)
+#define AST2700_WDT_RESET3_JTAG1 (1 << 12)
+#define AST2700_WDT_RESET3_SPI0 (1 << 13)
+#define AST2700_WDT_RESET3_SPI1 (1 << 14)
+#define AST2700_WDT_RESET3_SPI2 (1 << 15)
+#define AST2700_WDT_RESET3_I3C0 (1 << 16)
+#define AST2700_WDT_RESET3_I3C1 (1 << 17)
+#define AST2700_WDT_RESET3_I3C2 (1 << 18)
+#define AST2700_WDT_RESET3_I3C3 (1 << 19)
+#define AST2700_WDT_RESET3_I3C4 (1 << 20)
+#define AST2700_WDT_RESET3_I3C5 (1 << 21)
+#define AST2700_WDT_RESET3_I3C6 (1 << 22)
+#define AST2700_WDT_RESET3_I3C7 (1 << 23)
+#define AST2700_WDT_RESET3_I3C8 (1 << 24)
+#define AST2700_WDT_RESET3_I3C9 (1 << 25)
+#define AST2700_WDT_RESET3_I3C10 (1 << 26)
+#define AST2700_WDT_RESET3_I3C11 (1 << 27)
+#define AST2700_WDT_RESET3_I3C12 (1 << 28)
+#define AST2700_WDT_RESET3_I3C13 (1 << 29)
+#define AST2700_WDT_RESET3_I3C14 (1 << 30)
+#define AST2700_WDT_RESET3_I3C15 (1 << 31)
+
+#define AST2700_WDT_RESET3_DEFAULT 0x000093ec
+
+#define AST2700_WDT_RESET4_FMC (1 << 0)
+#define AST2700_WDT_RESET4_SOC_MISC1 (1 << 1)
+#define AST2700_WDT_RESET4_AHB (1 << 2)
+#define AST2700_WDT_RESET4_SLI1 (1 << 3)
+#define AST2700_WDT_RESET4_UART0 (1 << 4)
+#define AST2700_WDT_RESET4_UART1 (1 << 5)
+#define AST2700_WDT_RESET4_UART2 (1 << 6)
+#define AST2700_WDT_RESET4_UART3 (1 << 7)
+#define AST2700_WDT_RESET4_I2C_MONITOR (1 << 8)
+#define AST2700_WDT_RESET4_HOST_TO_SPI1 (1 << 9)
+#define AST2700_WDT_RESET4_HOST_TO_SPI2 (1 << 10)
+#define AST2700_WDT_RESET4_GPIO1 (1 << 11)
+#define AST2700_WDT_RESET4_FSI (1 << 12)
+#define AST2700_WDT_RESET4_CANBUS (1 << 13)
+#define AST2700_WDT_RESET4_MCTP (1 << 14)
+#define AST2700_WDT_RESET4_XDMA (1 << 15)
+#define AST2700_WDT_RESET4_UART5 (1 << 16)
+#define AST2700_WDT_RESET4_UART6 (1 << 17)
+#define AST2700_WDT_RESET4_UART7 (1 << 18)
+#define AST2700_WDT_RESET4_UART8 (1 << 19)
+#define AST2700_WDT_RESET4_BOOT_MCU (1 << 20)
+#define AST2700_WDT_RESET4_IO_MCU (1 << 21)
+#define AST2700_WDT_RESET4_LTPI0 (1 << 22)
+#define AST2700_WDT_RESET4_VGA_LINK (1 << 23)
+#define AST2700_WDT_RESET4_LTPI1 (1 << 24)
+#define AST2700_WDT_RESET4_LTPI_PHY (1 << 25)
+#define AST2700_WDT_RESET4_ACE (1 << 26)
+#define AST2700_WDT_RESET4_LTPI_GPIO0 (1 << 28)
+#define AST2700_WDT_RESET4_LTPI_GPIO1 (1 << 29)
+#define AST2700_WDT_RESET4_AHB_TO_PCIE1 (1 << 30)
+#define AST2700_WDT_RESET4_I3C_DMA (1 << 31)
+
+#define AST2700_WDT_RESET4_DEFAULT 0x40303803
+
+#define AST2700_WDT_RESET5_I2C_GLOBAL (1 << 0)
+#define AST2700_WDT_RESET5_I2C0 (1 << 1)
+#define AST2700_WDT_RESET5_I2C1 (1 << 2)
+#define AST2700_WDT_RESET5_I2C2 (1 << 3)
+#define AST2700_WDT_RESET5_I2C3 (1 << 4)
+#define AST2700_WDT_RESET5_I2C4 (1 << 5)
+#define AST2700_WDT_RESET5_I2C5 (1 << 6)
+#define AST2700_WDT_RESET5_I2C6 (1 << 7)
+#define AST2700_WDT_RESET5_I2C7 (1 << 8)
+#define AST2700_WDT_RESET5_I2C8 (1 << 9)
+#define AST2700_WDT_RESET5_I2C9 (1 << 10)
+#define AST2700_WDT_RESET5_I2C10 (1 << 11)
+#define AST2700_WDT_RESET5_I2C11 (1 << 12)
+#define AST2700_WDT_RESET5_I2C12 (1 << 13)
+#define AST2700_WDT_RESET5_I2C13 (1 << 14)
+#define AST2700_WDT_RESET5_I2C14 (1 << 15)
+#define AST2700_WDT_RESET5_I2C15 (1 << 16)
+#define AST2700_WDT_RESET5_UHCI (1 << 17)
+#define AST2700_WDT_RESET5_USB2_C_UART (1 << 18)
+#define AST2700_WDT_RESET5_USB2_C (1 << 19)
+#define AST2700_WDT_RESET5_USB2_D_UART (1 << 20)
+#define AST2700_WDT_RESET5_USB2_D (1 << 21)
+
+#define AST2700_WDT_RESET5_DEFAULT 0x00320000
+
#endif
--
2.34.1
next prev parent reply other threads:[~2025-10-07 8:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-07 8:36 [PATCH 0/3] watchdog: aspeed: Add AST2700 support Chin-Ting Kuo
2025-10-07 8:36 ` Chin-Ting Kuo [this message]
2025-10-07 8:36 ` [PATCH 2/3] watchdog: aspeed: Support variable number of reset mask registers Chin-Ting Kuo
2025-10-07 14:46 ` Guenter Roeck
2025-10-07 14:55 ` Guenter Roeck
2025-10-08 3:29 ` Chin-Ting Kuo
2025-10-08 4:21 ` Guenter Roeck
2025-10-07 8:36 ` [PATCH 3/3] watchdog: aspeed: Add support for AST2700 platform Chin-Ting Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251007083650.2155317-2-chin-ting_kuo@aspeedtech.com \
--to=chin-ting_kuo@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®