[PATCH] iio: imu: bmi270: fix dev_err_probe error msg

[Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>]

The bmi270 can be connected to I2C or a SPI interface. If it is a SPI,
during probe, if devm_regmap_init() fails, it should print the "spi"
term rather "i2c".

Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
---
Just fixing this little "typo", definitely it was copied from the bmi270_i2c.c [1],
which has the same dev_err_probe logic.
Tks and regards.

[1] https://github.com/torvalds/linux/blob/master/drivers/iio/imu/bmi270/bmi270_i2c.c#L30
---
 drivers/iio/imu/bmi270/bmi270_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/imu/bmi270/bmi270_spi.c b/drivers/iio/imu/bmi270/bmi270_spi.c
index 19dd7734f9d0..5e625586681d 100644
--- a/drivers/iio/imu/bmi270/bmi270_spi.c
+++ b/drivers/iio/imu/bmi270/bmi270_spi.c
@@ -60,7 +60,7 @@ static int bmi270_spi_probe(struct spi_device *spi)
 				  &bmi270_spi_regmap_config);
 	if (IS_ERR(regmap))
 		return dev_err_probe(dev, PTR_ERR(regmap),
-				     "Failed to init i2c regmap");
+				     "Failed to init spi regmap");
 
 	return bmi270_core_probe(dev, regmap, chip_info);
 }
-- 
2.48.1