[PATCH v2 2/3] usb: typec: ucsi: Report power supply changes on power opmode changes

[Jameson Thies <jthies@google.com>]

Report opmode changes from the PPM to the power supply class by calling
ucsi_port_psy_changed(). If the current opmode is USB PD, do not call
ucsi_port_psy_changed(). The power supply class will be updated after
requesting partner source PDOs.

Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/usb/typec/ucsi/ucsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 3f568f790f39..7b718049d0d1 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1022,14 +1022,17 @@ static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
 		con->rdo = 0;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_1_5A);
+		ucsi_port_psy_changed(con);
 		break;
 	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
 		con->rdo = 0;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_3_0A);
+		ucsi_port_psy_changed(con);
 		break;
 	default:
 		con->rdo = 0;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_USB);
+		ucsi_port_psy_changed(con);
 		break;
 	}
 }
-- 
2.51.0.858.gf9c4a03a3a-goog