From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Benoît Monin" <benoit.monin@bootlin.com>,
"Grégory Clement" <gregory.clement@bootlin.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Andrew Lunn" <andrew@lunn.ch>
Subject: [PATCH net-next v3 4/5] net: macb: rename bp->sgmii_phy field to bp->phy
Date: Thu, 23 Oct 2025 18:22:54 +0200 [thread overview]
Message-ID: <20251023-macb-eyeq5-v3-4-af509422c204@bootlin.com> (raw)
In-Reply-To: <20251023-macb-eyeq5-v3-0-af509422c204@bootlin.com>
The bp->sgmii_phy field is initialised at probe by init_reset_optional()
if bp->phy_interface == PHY_INTERFACE_MODE_SGMII. It gets used by:
- zynqmp_config: "cdns,zynqmp-gem" or "xlnx,zynqmp-gem" compatibles.
- mpfs_config: "microchip,mpfs-macb" compatible.
- versal_config: "xlnx,versal-gem" compatible.
Make name more generic as EyeQ5 requires the PHY in SGMII & RGMII cases.
Drop "for ZynqMP SGMII mode" comment that is already a lie, as it gets
used on Microchip platforms as well. And soon it won't be SGMII-only.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
drivers/net/ethernet/cadence/macb.h | 2 +-
drivers/net/ethernet/cadence/macb_main.c | 26 +++++++++++++-------------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 05bfa9bd4782..87414a2ddf6e 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -1341,7 +1341,7 @@ struct macb {
struct macb_ptp_info *ptp_info; /* macb-ptp interface */
- struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
+ struct phy *phy;
spinlock_t tsu_clk_lock; /* gem tsu clock locking */
unsigned int tsu_rate;
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 8b688a6cb2f9..44188e7eee56 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -2965,7 +2965,7 @@ static int macb_open(struct net_device *dev)
macb_init_hw(bp);
- err = phy_power_on(bp->sgmii_phy);
+ err = phy_power_on(bp->phy);
if (err)
goto reset_hw;
@@ -2981,7 +2981,7 @@ static int macb_open(struct net_device *dev)
return 0;
phy_off:
- phy_power_off(bp->sgmii_phy);
+ phy_power_off(bp->phy);
reset_hw:
macb_reset_hw(bp);
@@ -3013,7 +3013,7 @@ static int macb_close(struct net_device *dev)
phylink_stop(bp->phylink);
phylink_disconnect_phy(bp->phylink);
- phy_power_off(bp->sgmii_phy);
+ phy_power_off(bp->phy);
spin_lock_irqsave(&bp->lock, flags);
macb_reset_hw(bp);
@@ -5141,13 +5141,13 @@ static int init_reset_optional(struct platform_device *pdev)
if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
/* Ensure PHY device used in SGMII mode is ready */
- bp->sgmii_phy = devm_phy_optional_get(&pdev->dev, NULL);
+ bp->phy = devm_phy_optional_get(&pdev->dev, NULL);
- if (IS_ERR(bp->sgmii_phy))
- return dev_err_probe(&pdev->dev, PTR_ERR(bp->sgmii_phy),
+ if (IS_ERR(bp->phy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(bp->phy),
"failed to get SGMII PHY\n");
- ret = phy_init(bp->sgmii_phy);
+ ret = phy_init(bp->phy);
if (ret)
return dev_err_probe(&pdev->dev, ret,
"failed to init SGMII PHY\n");
@@ -5176,7 +5176,7 @@ static int init_reset_optional(struct platform_device *pdev)
/* Fully reset controller at hardware level if mapped in device tree */
ret = device_reset_optional(&pdev->dev);
if (ret) {
- phy_exit(bp->sgmii_phy);
+ phy_exit(bp->phy);
return dev_err_probe(&pdev->dev, ret, "failed to reset controller");
}
@@ -5184,7 +5184,7 @@ static int init_reset_optional(struct platform_device *pdev)
err_out_phy_exit:
if (ret)
- phy_exit(bp->sgmii_phy);
+ phy_exit(bp->phy);
return ret;
}
@@ -5594,7 +5594,7 @@ static int macb_probe(struct platform_device *pdev)
mdiobus_free(bp->mii_bus);
err_out_phy_exit:
- phy_exit(bp->sgmii_phy);
+ phy_exit(bp->phy);
err_out_free_netdev:
free_netdev(dev);
@@ -5618,7 +5618,7 @@ static void macb_remove(struct platform_device *pdev)
if (dev) {
bp = netdev_priv(dev);
unregister_netdev(dev);
- phy_exit(bp->sgmii_phy);
+ phy_exit(bp->phy);
mdiobus_unregister(bp->mii_bus);
mdiobus_free(bp->mii_bus);
@@ -5645,7 +5645,7 @@ static int __maybe_unused macb_suspend(struct device *dev)
u32 tmp;
if (!device_may_wakeup(&bp->dev->dev))
- phy_exit(bp->sgmii_phy);
+ phy_exit(bp->phy);
if (!netif_running(netdev))
return 0;
@@ -5774,7 +5774,7 @@ static int __maybe_unused macb_resume(struct device *dev)
int err;
if (!device_may_wakeup(&bp->dev->dev))
- phy_init(bp->sgmii_phy);
+ phy_init(bp->phy);
if (!netif_running(netdev))
return 0;
--
2.51.1
next prev parent reply other threads:[~2025-10-23 16:23 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-23 16:22 [PATCH net-next v3 0/5] net: macb: EyeQ5 support Théo Lebrun
2025-10-23 16:22 ` [PATCH net-next v3 1/5] dt-bindings: net: cdns,macb: add Mobileye EyeQ5 ethernet interface Théo Lebrun
2025-10-23 16:22 ` [PATCH net-next v3 2/5] net: macb: match skb_reserve(skb, NET_IP_ALIGN) with HW alignment Théo Lebrun
2025-10-23 19:07 ` Andrew Lunn
2025-10-30 14:31 ` Nicolas Ferre
2025-10-23 16:22 ` [PATCH net-next v3 3/5] net: macb: add no LSO capability (MACB_CAPS_NO_LSO) Théo Lebrun
2025-10-30 14:32 ` Nicolas Ferre
2025-10-23 16:22 ` Théo Lebrun [this message]
2025-10-30 14:34 ` [PATCH net-next v3 4/5] net: macb: rename bp->sgmii_phy field to bp->phy Nicolas Ferre
2025-10-23 16:22 ` [PATCH net-next v3 5/5] net: macb: Add "mobileye,eyeq5-gem" compatible Théo Lebrun
2025-10-23 19:08 ` Andrew Lunn
2025-10-30 14:37 ` Nicolas Ferre
2026-02-26 10:46 ` Conor Dooley
2026-02-26 19:24 ` Russell King (Oracle)
2026-02-26 20:20 ` Conor Dooley
2026-02-26 20:44 ` Russell King (Oracle)
2026-02-26 21:05 ` Conor Dooley
2026-02-26 21:13 ` Andrew Lunn
2025-10-28 14:20 ` [PATCH net-next v3 0/5] net: macb: EyeQ5 support patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251023-macb-eyeq5-v3-4-af509422c204@bootlin.com \
--to=theo.lebrun@bootlin.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=benoit.monin@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=gregory.clement@bootlin.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®