From: Rohan G Thomas via B4 Relay <devnull+rohan.g.thomas.altera.com@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
Rohan G Thomas <rohan.g.thomas@intel.com>,
Boon Khai Ng <boon.khai.ng@altera.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Rohan G Thomas <rohan.g.thomas@altera.com>,
Matthew Gerlach <matthew.gerlach@altera.com>
Subject: [PATCH net v4 2/3] net: stmmac: Consider Tx VLAN offload tag length for maxSDU
Date: Tue, 28 Oct 2025 11:18:44 +0800 [thread overview]
Message-ID: <20251028-qbv-fixes-v4-2-26481c7634e3@altera.com> (raw)
In-Reply-To: <20251028-qbv-fixes-v4-0-26481c7634e3@altera.com>
From: Rohan G Thomas <rohan.g.thomas@altera.com>
Queue maxSDU requirement of 802.1 Qbv standard requires mac to drop
packets that exceeds maxSDU length and maxSDU doesn't include
preamble, destination and source address, or FCS but includes
ethernet type and VLAN header.
On hardware with Tx VLAN offload enabled, VLAN header length is not
included in the skb->len, when Tx VLAN offload is requested. This
leads to incorrect length checks and allows transmission of
oversized packets. Add the VLAN_HLEN to the skb->len before checking
the Qbv maxSDU if Tx VLAN offload is requested for the packet.
Fixes: c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0e2dc0a464d5516b8aabe2f9afc60c6e37f0209e..042c823bbced88070fa26003c6b513257c0f2bb6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4518,6 +4518,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
bool has_vlan, set_ic;
int entry, first_tx;
dma_addr_t des;
+ u32 sdu_len;
tx_q = &priv->dma_conf.tx_queue[queue];
txq_stats = &priv->xstats.txq_stats[queue];
@@ -4536,10 +4537,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
}
if (priv->est && priv->est->enable &&
- priv->est->max_sdu[queue] &&
- skb->len > priv->est->max_sdu[queue]){
- priv->xstats.max_sdu_txq_drop[queue]++;
- goto max_sdu_err;
+ priv->est->max_sdu[queue]) {
+ sdu_len = skb->len;
+ /* Add VLAN tag length if VLAN tag insertion offload is requested */
+ if (priv->dma_cap.vlins && skb_vlan_tag_present(skb))
+ sdu_len += VLAN_HLEN;
+ if (sdu_len > priv->est->max_sdu[queue]) {
+ priv->xstats.max_sdu_txq_drop[queue]++;
+ goto max_sdu_err;
+ }
}
if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
--
2.43.7
next prev parent reply other threads:[~2025-10-28 3:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-28 3:18 [PATCH net v4 0/3] net: stmmac: Fixes for stmmac Tx VLAN insert and EST Rohan G Thomas via B4 Relay
2025-10-28 3:18 ` [PATCH net v4 1/3] net: stmmac: vlan: Disable 802.1AD tag insertion offload Rohan G Thomas via B4 Relay
2025-10-28 3:18 ` Rohan G Thomas via B4 Relay [this message]
2025-10-28 3:18 ` [PATCH net v4 3/3] net: stmmac: est: Fix GCL bounds checks Rohan G Thomas via B4 Relay
2025-10-30 2:00 ` [PATCH net v4 0/3] net: stmmac: Fixes for stmmac Tx VLAN insert and EST patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251028-qbv-fixes-v4-2-26481c7634e3@altera.com \
--to=devnull+rohan.g.thomas.altera.com@kernel.org \
--cc=Jose.Abreu@synopsys.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=boon.khai.ng@altera.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=matthew.gerlach@altera.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rohan.g.thomas@altera.com \
--cc=rohan.g.thomas@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®