mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tanmay Shah <tanmay.shah@amd.com>
To: <andersson@kernel.org>, <mathieu.poirier@linaro.org>
Cc: <linux-remoteproc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Tanmay Shah <tanmay.shah@amd.com>
Subject: [PATCH 2/3] remoteproc: core: full attach detach during recovery
Date: Mon, 27 Oct 2025 21:57:30 -0700	[thread overview]
Message-ID: <20251028045730.1622685-3-tanmay.shah@amd.com> (raw)
In-Reply-To: <20251028045730.1622685-1-tanmay.shah@amd.com>

Current attach on recovery mechanism loads the clean resource table
during recovery, but doesn't re-allocate the resources. RPMsg
communication will fail after recovery due to this. Fix this
incorrect behavior by doing the full detach and attach of remote
processor during the recovery. This will load the clean resource table
and re-allocate all the resources, which will set up correct vring
information in the resource table.

Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
---
 drivers/remoteproc/remoteproc_core.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index aada2780b343..f5b078fe056a 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1777,11 +1777,11 @@ static int rproc_attach_recovery(struct rproc *rproc)
 {
 	int ret;
 
-	ret = __rproc_detach(rproc);
+	ret = rproc_detach(rproc);
 	if (ret)
 		return ret;
 
-	return __rproc_attach(rproc);
+	return rproc_attach(rproc);
 }
 
 static int rproc_boot_recovery(struct rproc *rproc)
@@ -1829,6 +1829,9 @@ int rproc_trigger_recovery(struct rproc *rproc)
 	struct device *dev = &rproc->dev;
 	int ret;
 
+	if (rproc_has_feature(rproc, RPROC_FEAT_ATTACH_ON_RECOVERY))
+		return rproc_attach_recovery(rproc);
+
 	ret = mutex_lock_interruptible(&rproc->lock);
 	if (ret)
 		return ret;
@@ -1839,10 +1842,7 @@ int rproc_trigger_recovery(struct rproc *rproc)
 
 	dev_err(dev, "recovering %s\n", rproc->name);
 
-	if (rproc_has_feature(rproc, RPROC_FEAT_ATTACH_ON_RECOVERY))
-		ret = rproc_attach_recovery(rproc);
-	else
-		ret = rproc_boot_recovery(rproc);
+	ret = rproc_boot_recovery(rproc);
 
 unlock_mutex:
 	mutex_unlock(&rproc->lock);
@@ -1860,6 +1860,7 @@ static void rproc_crash_handler_work(struct work_struct *work)
 {
 	struct rproc *rproc = container_of(work, struct rproc, crash_handler);
 	struct device *dev = &rproc->dev;
+	int ret;
 
 	dev_dbg(dev, "enter %s\n", __func__);
 
@@ -1883,8 +1884,11 @@ static void rproc_crash_handler_work(struct work_struct *work)
 
 	mutex_unlock(&rproc->lock);
 
-	if (!rproc->recovery_disabled)
-		rproc_trigger_recovery(rproc);
+	if (!rproc->recovery_disabled) {
+		ret = rproc_trigger_recovery(rproc);
+		if (ret)
+			dev_warn(dev, "rproc recovery failed, err %d\n", ret);
+	}
 
 out:
 	pm_relax(rproc->dev.parent);
@@ -2057,7 +2061,7 @@ int rproc_detach(struct rproc *rproc)
 		return ret;
 	}
 
-	if (rproc->state != RPROC_ATTACHED) {
+	if (rproc->state != RPROC_ATTACHED && rproc->state != RPROC_CRASHED) {
 		ret = -EINVAL;
 		goto out;
 	}
-- 
2.34.1


  parent reply	other threads:[~2025-10-28  5:01 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-28  4:57 [PATCH 0/3] remoteproc: xlnx: remote crash recovery Tanmay Shah
2025-10-28  4:57 ` [PATCH 1/3] remoteproc: xlnx: enable boot recovery Tanmay Shah
2025-10-28  4:57 ` Tanmay Shah [this message]
2025-10-29 22:49   ` [PATCH 2/3] remoteproc: core: full attach detach during recovery Iuliana Prodan
2025-10-29 23:41     ` Tanmay Shah
2025-11-02  8:54   ` Zhongqiu Han
2025-11-03 17:22     ` Tanmay Shah
2025-10-28  4:57 ` [PATCH 3/3] remoteproc: xlnx: add crash detection mechanism Tanmay Shah
2025-10-29  3:24 ` [PATCH 0/3] remoteproc: xlnx: remote crash recovery Peng Fan
2025-10-29  4:15   ` Tanmay Shah
2025-10-29 23:51     ` Tanmay Shah
2025-10-30  4:21       ` Peng Fan
2025-11-10 18:03         ` Mathieu Poirier
2025-11-10 18:39           ` Tanmay Shah
2025-11-11  7:12           ` Peng Fan
2025-11-11 16:47             ` Tanmay Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251028045730.1622685-3-tanmay.shah@amd.com \
    --to=tanmay.shah@amd.com \
    --cc=andersson@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®