From: Nishanth Menon <nm@ti.com>
To: Simona Vetter <simona@ffwll.ch>, David Airlie <airlied@gmail.com>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
Maxime Ripard <mripard@kernel.org>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Jonas Karlman <jonas@kwiboo.se>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Robert Foss <rfoss@kernel.org>,
"Andrzej Hajda" <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Phong LE <ple@baylibre.com>,
Dmitry <dmitry.baryshkov@oss.qualcomm.com>
Cc: Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
Robert Nelson <robertcnelson@gmail.com>,
Jason Kridner <jkridner@beagleboard.org>,
Andrew Davis <afd@ti.com>,
Tomi V <tomi.valkeinen@ideasonboard.com>,
Devarsh <devarsht@ti.com>, Nishanth Menon <nm@ti.com>
Subject: [PATCH V6 5/5] drm/bridge: it66121: Add minimal it66122 support
Date: Wed, 29 Oct 2025 10:06:36 -0500 [thread overview]
Message-ID: <20251029150636.3118628-6-nm@ti.com> (raw)
In-Reply-To: <20251029150636.3118628-1-nm@ti.com>
The IT66122 is a pin compatible replacement for the IT66122. Based on
empirical testing, the new device looks to be compatible with IT66121.
However due to a lack of public data sheet at this time beyond overall
feature list[1] (which seems to add additional features vs ITT66121),
it is hard to determine that additional register operations required
to enable additional features.
So, introduce the device as a new compatible that we will detect based
on vid/pid match, with explicit id that can be used to extend the
driver capability as information becomes available later on.
[1] https://www.ite.com.tw/en/product/cate1/IT66122
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
Changes since V5:
* Picked Tomi's Ack
V5: https://lore.kernel.org/all/20250827202354.2017972-6-nm@ti.com/
V4: https://lore.kernel.org/all/20250819130807.3322536-6-nm@ti.com/
V3: https://lore.kernel.org/all/20250815034105.1276548-5-nm@ti.com/
V2: https://lore.kernel.org/all/20250813204106.580141-4-nm@ti.com/
drivers/gpu/drm/bridge/ite-it66121.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it66121.c b/drivers/gpu/drm/bridge/ite-it66121.c
index 1b2ef774c770..0185f61e6e59 100644
--- a/drivers/gpu/drm/bridge/ite-it66121.c
+++ b/drivers/gpu/drm/bridge/ite-it66121.c
@@ -287,6 +287,7 @@
enum chip_id {
ID_IT6610,
ID_IT66121,
+ ID_IT66122,
};
struct it66121_chip_info {
@@ -402,7 +403,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
if (ret)
return ret;
- if (ctx->id == ID_IT66121) {
+ if (ctx->id == ID_IT66121 || ctx->id == ID_IT66122) {
ret = regmap_write_bits(ctx->regmap, IT66121_AFE_IP_REG,
IT66121_AFE_IP_EC1, 0);
if (ret)
@@ -428,7 +429,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
if (ret)
return ret;
- if (ctx->id == ID_IT66121) {
+ if (ctx->id == ID_IT66121 || ctx->id == ID_IT66122) {
ret = regmap_write_bits(ctx->regmap, IT66121_AFE_IP_REG,
IT66121_AFE_IP_EC1,
IT66121_AFE_IP_EC1);
@@ -599,7 +600,7 @@ static int it66121_bridge_attach(struct drm_bridge *bridge,
if (ret)
return ret;
- if (ctx->id == ID_IT66121) {
+ if (ctx->id == ID_IT66121 || ctx->id == ID_IT66122) {
ret = regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
IT66121_CLK_BANK_PWROFF_RCLK, 0);
if (ret)
@@ -802,7 +803,7 @@ void it66121_bridge_mode_set(struct drm_bridge *bridge,
if (regmap_write(ctx->regmap, IT66121_HDMI_MODE_REG, IT66121_HDMI_MODE_HDMI))
goto unlock;
- if (ctx->id == ID_IT66121 &&
+ if ((ctx->id == ID_IT66121 || ctx->id == ID_IT66122) &&
regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
IT66121_CLK_BANK_PWROFF_TXCLK,
IT66121_CLK_BANK_PWROFF_TXCLK)) {
@@ -815,7 +816,7 @@ void it66121_bridge_mode_set(struct drm_bridge *bridge,
if (it66121_configure_afe(ctx, adjusted_mode))
goto unlock;
- if (ctx->id == ID_IT66121 &&
+ if ((ctx->id == ID_IT66121 || ctx->id == ID_IT66122) &&
regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
IT66121_CLK_BANK_PWROFF_TXCLK, 0)) {
goto unlock;
@@ -1501,6 +1502,7 @@ static const char * const it66121_supplies[] = {
static const struct it66121_chip_info it66xx_chip_info[] = {
{.id = ID_IT6610, .vid = 0xca00, .pid = 0x0611 },
{.id = ID_IT66121, .vid = 0x4954, .pid = 0x0612 },
+ {.id = ID_IT66122, .vid = 0x4954, .pid = 0x0622 },
};
static int it66121_probe(struct i2c_client *client)
@@ -1621,6 +1623,7 @@ static void it66121_remove(struct i2c_client *client)
static const struct of_device_id it66121_dt_match[] = {
{ .compatible = "ite,it6610" },
{ .compatible = "ite,it66121" },
+ { .compatible = "ite,it66122" },
{ }
};
MODULE_DEVICE_TABLE(of, it66121_dt_match);
@@ -1628,6 +1631,7 @@ MODULE_DEVICE_TABLE(of, it66121_dt_match);
static const struct i2c_device_id it66121_id[] = {
{ .name = "it6610" },
{ .name = "it66121" },
+ { .name = "it66122" },
{ }
};
MODULE_DEVICE_TABLE(i2c, it66121_id);
--
2.47.0
next prev parent reply other threads:[~2025-10-29 15:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-29 15:06 [PATCH V6 0/5] drm/bridge: it66121: Add initial " Nishanth Menon
2025-10-29 15:06 ` [PATCH V6 1/5] dt-bindings: display: bridge: it66121: Add compatible string for IT66122 Nishanth Menon
2025-10-29 15:06 ` [PATCH V6 2/5] drm/bridge: it66121: Drop ftrace like dev_dbg() prints Nishanth Menon
2025-10-29 15:06 ` [PATCH V6 3/5] drm/bridge: it66121: Sort the compatibles Nishanth Menon
2025-10-29 15:06 ` [PATCH V6 4/5] drm/bridge: it66121: Use vid/pid to detect the type of chip Nishanth Menon
2025-10-29 15:06 ` Nishanth Menon [this message]
2025-11-19 9:30 ` [PATCH V6 0/5] drm/bridge: it66121: Add initial it66122 support Tomi Valkeinen
2025-11-21 14:57 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251029150636.3118628-6-nm@ti.com \
--to=nm@ti.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=afd@ti.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jkridner@beagleboard.org \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=ple@baylibre.com \
--cc=rfoss@kernel.org \
--cc=robertcnelson@gmail.com \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®