[PATCH 2/2] drm/rockchip: replace use of system_wq with system_percpu_wq

[Marco Crivellari <marco.crivellari@suse.com>]

Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.

This lack of consistency cannot be addressed without refactoring the API.

system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.

The old wq (system_wq) will be kept for a few release cycles.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
---
 drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
index ed6e8f036f4b..deeeface0b63 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
@@ -276,7 +276,7 @@ static irqreturn_t dw_hdmi_qp_rk3576_irq(int irq, void *dev_id)
 
 	val = FIELD_PREP_WM16(RK3576_HDMI_HPD_INT_CLR, 1);
 	regmap_write(hdmi->regmap, RK3576_IOC_MISC_CON0, val);
-	mod_delayed_work(system_wq, &hdmi->hpd_work,
+	mod_delayed_work(system_percpu_wq, &hdmi->hpd_work,
 			 msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
 
 	val = FIELD_PREP_WM16(RK3576_HDMI_HPD_INT_MSK, 0);
@@ -319,7 +319,7 @@ static irqreturn_t dw_hdmi_qp_rk3588_irq(int irq, void *dev_id)
 		val = FIELD_PREP_WM16(RK3588_HDMI0_HPD_INT_CLR, 1);
 	regmap_write(hdmi->regmap, RK3588_GRF_SOC_CON2, val);
 
-	mod_delayed_work(system_wq, &hdmi->hpd_work,
+	mod_delayed_work(system_percpu_wq, &hdmi->hpd_work,
 			 msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
 
 	if (hdmi->port_id)
-- 
2.51.0