From: Joy Zou <joy.zou@nxp.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Frank Li <Frank.Li@nxp.com>
Cc: linux-kernel@vger.kernel.org, imx@lists.linux.dev,
Joy Zou <joy.zou@nxp.com>
Subject: [PATCH 2/3] regulator: pf9453: remove low power mode
Date: Mon, 03 Nov 2025 11:26:48 +0800 [thread overview]
Message-ID: <20251103-b4-next-pf9453-v1-2-a025d536eee1@nxp.com> (raw)
In-Reply-To: <20251103-b4-next-pf9453-v1-0-a025d536eee1@nxp.com>
Remove low power mode support to align with the Rev.1.0 -- 25 June 2025
datasheet, which no longer support this feature.
Datasheet is available at
https://www.nxp.com/docs/en/data-sheet/PF9453.pdf.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
drivers/regulator/pf9453-regulator.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/regulator/pf9453-regulator.c b/drivers/regulator/pf9453-regulator.c
index d522715a7c74908b39880ce9f0bfc252a4dd4ba2..fded3e65b856f51be97d9d4b307a2291d247a21a 100644
--- a/drivers/regulator/pf9453-regulator.c
+++ b/drivers/regulator/pf9453-regulator.c
@@ -119,7 +119,6 @@ enum {
#define LDO_ENMODE_ONREQ_STBY_DPSTBY 0x03
/* PF9453_REG_BUCK1_CTRL bits */
-#define BUCK1_LPMODE 0x30
#define BUCK1_AD 0x08
#define BUCK1_FPWM 0x04
#define BUCK1_ENMODE_MASK GENMASK(1, 0)
@@ -130,19 +129,16 @@ enum {
#define BUCK2_RAMP_12P5MV 0x1
#define BUCK2_RAMP_6P25MV 0x2
#define BUCK2_RAMP_3P125MV 0x3
-#define BUCK2_LPMODE 0x30
#define BUCK2_AD 0x08
#define BUCK2_FPWM 0x04
#define BUCK2_ENMODE_MASK GENMASK(1, 0)
/* PF9453_REG_BUCK3_CTRL bits */
-#define BUCK3_LPMODE 0x30
#define BUCK3_AD 0x08
#define BUCK3_FPWM 0x04
#define BUCK3_ENMODE_MASK GENMASK(1, 0)
/* PF9453_REG_BUCK4_CTRL bits */
-#define BUCK4_LPMODE 0x30
#define BUCK4_AD 0x08
#define BUCK4_FPWM 0x04
#define BUCK4_ENMODE_MASK GENMASK(1, 0)
@@ -535,14 +531,6 @@ static int buck_set_dvs(const struct regulator_desc *desc,
}
}
- if (ret == 0) {
- struct pf9453_regulator_desc *regulator = container_of(desc,
- struct pf9453_regulator_desc, desc);
-
- /* Enable DVS control through PMIC_STBY_REQ for this BUCK */
- ret = pf9453_pmic_write(pf9453, regulator->desc.enable_reg,
- BUCK2_LPMODE, BUCK2_LPMODE);
- }
return ret;
}
--
2.37.1
next prev parent reply other threads:[~2025-11-03 3:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 3:26 [PATCH 0/3] regulator: pf9453: optimize PMIC PF9453 driver Joy Zou
2025-11-03 3:26 ` [PATCH 1/3] regulator: pf9453: change the device ID register address Joy Zou
2025-11-03 3:26 ` Joy Zou [this message]
2025-11-03 3:26 ` [PATCH 3/3] regulator: pf9453: remove unused I2C_LT register Joy Zou
2025-11-04 15:06 ` [PATCH 0/3] regulator: pf9453: optimize PMIC PF9453 driver Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103-b4-next-pf9453-v1-2-a025d536eee1@nxp.com \
--to=joy.zou@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=broonie@kernel.org \
--cc=imx@lists.linux.dev \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®