[PATCH 3/3] Documentation: tps6594-pfsm: Fix macro cross-reference syntax

[Bagas Sanjaya <bagasdotme@gmail.com>]

C macro references are erroneously written using :c:macro:: (note the
double colon). This causes the references to be outputted as combination
of verbatim roles and italicized names instead.

Correct the syntax.

Fixes: dce548889650c1 ("Documentation: Add TI TPS6594 PFSM")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
---
 Documentation/misc-devices/tps6594-pfsm.rst | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/misc-devices/tps6594-pfsm.rst b/Documentation/misc-devices/tps6594-pfsm.rst
index 4ada37ccdcbae8..5f17a4fd9579ea 100644
--- a/Documentation/misc-devices/tps6594-pfsm.rst
+++ b/Documentation/misc-devices/tps6594-pfsm.rst
@@ -39,28 +39,28 @@ include/uapi/linux/tps6594_pfsm.h
 Driver IOCTLs
 =============
 
-:c:macro::`PMIC_GOTO_STANDBY`
+:c:macro:`PMIC_GOTO_STANDBY`
 All device resources are powered down. The processor is off, and
 no voltage domains are energized.
 
-:c:macro::`PMIC_GOTO_LP_STANDBY`
+:c:macro:`PMIC_GOTO_LP_STANDBY`
 The digital and analog functions of the PMIC, which are not
 required to be always-on, are turned off (low-power).
 
-:c:macro::`PMIC_UPDATE_PGM`
+:c:macro:`PMIC_UPDATE_PGM`
 Triggers a firmware update.
 
-:c:macro::`PMIC_SET_ACTIVE_STATE`
+:c:macro:`PMIC_SET_ACTIVE_STATE`
 One of the operational modes.
 The PMICs are fully functional and supply power to all PDN loads.
 All voltage domains are energized in both MCU and Main processor
 sections.
 
-:c:macro::`PMIC_SET_MCU_ONLY_STATE`
+:c:macro:`PMIC_SET_MCU_ONLY_STATE`
 One of the operational modes.
 Only the power resources assigned to the MCU Safety Island are on.
 
-:c:macro::`PMIC_SET_RETENTION_STATE`
+:c:macro:`PMIC_SET_RETENTION_STATE`
 One of the operational modes.
 Depending on the triggers set, some DDR/GPIO voltage domains can
 remain energized, while all other domains are off to minimize
-- 
An old man doll... just what I always wanted! - Clara