From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail11.truemail.it (mail11.truemail.it [217.194.8.81]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DB20232E75C; Tue, 4 Nov 2025 14:52:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.194.8.81 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1762267980; cv=none; b=GuC6sEo2ZaqYpMRGwZoWuSKX8RH1qLsm0b8h2mSA4mhnEiQnXmaIZeIcLGds+MqA8qRKRNFkbigHl4nzVIFZCUppddA1iwAiltZKeyk/SrQAKnfjbTtCVPLyCZDtWBbJyEiBUmRzEJ5jvPWYLELonw7BWGWqaFkqAT7VJeTP54s= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1762267980; c=relaxed/simple; bh=OR6lKo19VsO6qd9YjimXaofwW3n8vRUWqaATJno6eJw=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=VWxoR177htqpmamUhyzcfkmdTVa9NWZZ6rsYilAPC6W8IH+B9gO5n/+R8fZri3zFyWVg330hDc3FNypGx8+ayqZv7Ce6RAb6BPlCF4mQK1pAq+8CuOOKx4SnAcAFtSOmGuIRoovbtdiN9i7BPuyYdXUXfkq4FlcjlpELYOZ1f3s= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=dolcini.it; spf=pass smtp.mailfrom=dolcini.it; dkim=pass (2048-bit key) header.d=dolcini.it header.i=@dolcini.it header.b=RVm0C4a3; arc=none smtp.client-ip=217.194.8.81 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=dolcini.it Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=dolcini.it Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=dolcini.it header.i=@dolcini.it header.b="RVm0C4a3" Received: from francesco-nb.corp.toradex.com (248.201.173.83.static.wline.lns.sme.cust.swisscom.ch [83.173.201.248]) by mail11.truemail.it (Postfix) with ESMTPA id A61611FAE2; Tue, 4 Nov 2025 15:52:54 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dolcini.it; s=default; t=1762267975; bh=R5ETbgBOogaaUjCeMFsixqUptfUPuVyUkwJLDUHin0U=; h=From:To:Subject; b=RVm0C4a3Ylxcnt0i997gAJTsoAM57LZUaG96nSkG6HH9IAhHEUP8gwRmUu0GMkWd3 zjt4wZAiXNpL4E+h1/0b2XhVJtiTLmeYTS2JSqPrdCqqgWd/EJDlu570RgFXD3rh3G kL4BCx1JL7q6agq6U1jx6bG1oWqjJT1VAyL3CO7ed9rDsELXZKf+U5x9Qsc9tUODZu YEW1VfYg4ASGlj52uFR1chhjfsHZFD+oZmUiv0ohc9ejLuCeWGLZ4rB8SdPJ9wAdm4 odGJ2+D4rIpgkpXFFh9U65b4+qh13x2ZAsJj9CKcP5Z8FfweoT3q6fR0nbZj6sx6qm lvmagSNJ3OnWg== From: Francesco Dolcini To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: =?UTF-8?q?Jo=C3=A3o=20Paulo=20Gon=C3=A7alves?= , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Francesco Dolcini Subject: [PATCH v1 3/3] arm64: dts: ti: am69-aquila: Add Clover Date: Tue, 4 Nov 2025 15:52:37 +0100 Message-ID: <20251104145240.61219-3-francesco@dolcini.it> X-Mailer: git-send-email 2.47.3 In-Reply-To: <20251104145240.61219-1-francesco@dolcini.it> References: <20251104144915.60445-1-francesco@dolcini.it> <20251104145240.61219-1-francesco@dolcini.it> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: João Paulo Gonçalves Add support for Aquila AM69 mated with Clover carrier board. Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 Link: https://www.toradex.com/products/carrier-board/clover Signed-off-by: João Paulo Gonçalves Signed-off-by: Francesco Dolcini --- arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am69-aquila-clover.dts | 451 ++++++++++++++++++ 2 files changed, 452 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 6ce652fe98fa..38a93b689fe7 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -153,6 +153,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo # Boards with J784s4 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am69-aquila-clover.dtb dtb-$(CONFIG_ARCH_K3) += k3-am69-aquila-dev.dtb dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am69-sk-pcie0-ep.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts new file mode 100644 index 000000000000..55fd214a82e4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts @@ -0,0 +1,451 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 + * https://www.toradex.com/products/carrier-board/clover + */ + +/dts-v1/; + +#include +#include "k3-am69-aquila.dtsi" + +/ { + model = "Toradex Aquila AM69 on Clover Board"; + compatible = "toradex,aquila-am69-clover", + "toradex,aquila-am69", + "ti,j784s4"; + + aliases { + eeprom1 = &carrier_eeprom; + }; + + reg_3v3_dp: regulator-3v3-dp { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_21_dp>; + /* Aquila GPIO_21_DP (AQUILA B57) */ + gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "DP_3V3"; + startup-delay-us = <10000>; + }; + + /* Aquila DP_1 */ + dp-connector { + compatible = "dp-connector"; + dp-pwr-supply = <®_3v3_dp>; + label = "Display Port"; + type = "full-size"; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; +}; + +/* On-module ETH_1 MDIO */ +&davinci_mdio { + status = "okay"; +}; + +&dp0_ports { + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp_connector_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; + +&main0_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main0_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main0_alert1>; + }; + }; +}; + +&main1_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main1_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main1_alert1>; + }; + }; +}; + +&main2_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main2_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main2_alert1>; + }; + }; +}; + +&main3_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main3_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main3_alert1>; + }; + }; +}; + +&main4_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main4_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main4_alert1>; + }; + }; +}; + +/* Aquila ETH_2 */ +&main_cpsw0 { + status = "okay"; +}; + +/* Aquila ETH_2 SGMII PHY */ +&main_cpsw0_port8 { + phy-handle = <&cpsw0_port8_phy4>; + status = "okay"; +}; + +/* Aquila ETH_2_XGMII_MDIO */ +&main_cpsw0_mdio { + status = "okay"; + + cpsw0_port8_phy4: ethernet-phy@4 { + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth2_int>; + interrupt-parent = <&main_gpio0>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +/* Aquila PWM_1 */ +&main_ehrpwm0 { + status = "okay"; +}; + +/* Aquila PWM_2 */ +&main_ehrpwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_01>, /* Aquila GPIO_01 */ + <&pinctrl_gpio_02>, /* Aquila GPIO_02 */ + <&pinctrl_gpio_03>; /* Aquila GPIO_03 */ +}; + +/* Aquila I2C_6 */ +&main_i2c5 { + status = "okay"; +}; + +/* Aquila CAN_1 */ +&main_mcan10 { + status = "okay"; +}; + +/* Aquila CAN_3 */ +&main_mcan13 { + status = "okay"; +}; + +/* Aquila SD_1 */ +&main_sdhci1 { + status = "okay"; +}; + +/* Aquila SPI_2 */ +&main_spi0 { + status = "okay"; +}; + +/* Aquila SPI_1 */ +&main_spi2 { + pinctrl-0 = <&pinctrl_main_spi2>, + <&pinctrl_main_spi2_cs0>, + <&pinctrl_gpio_05>; + cs-gpios = <0>, <&wkup_gpio0 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_06>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <18500000>; + }; +}; + +/* Aquila UART_1 */ +&main_uart4 { + status = "okay"; +}; + +/* Aquila UART_3, used as the Linux console */ +&main_uart8 { + status = "okay"; +}; + +&mcu_cpsw { + status = "okay"; +}; + +/* On-module ETH_1 RGMII */ +&mcu_cpsw_port1 { + status = "okay"; +}; + +/* Aquila I2C_1 */ +&mcu_i2c0 { + clock-frequency = <100000>; + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan: fan { + cooling-levels = <102 179 255>; + #cooling-cells = <2>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + /* USB-C OTG (TCPC USB PD PHY) */ + tcpc@52 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_int>; + interrupt-parent = <&main_gpio0>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C OTG"; + power-role = "dual"; + try-power-role = "sink"; + self-powered; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <1000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_con_hs: endpoint { + remote-endpoint = <&usb0_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_1_con_ss: endpoint { + remote-endpoint = <&usb0_ss_mux>; + }; + }; + }; + }; + }; + + carrier_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Aquila I2C_2 */ +&mcu_i2c1 { + status = "okay"; +}; + +/* Aquila CAN_2 */ +&mcu_mcan0 { + status = "okay"; +}; + +/* Aquila CAN_4 */ +&mcu_mcan1 { + status = "okay"; +}; + +/* Aquila UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +&mhdp { + status = "okay"; +}; + +/* Aquila QSPI_1 */ +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_ospi0_4bit>, <&pinctrl_mcu_ospi0_cs0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + cdns,read-delay = <0>; + cdns,tchsh-ns = <3>; + cdns,tsd2d-ns = <10>; + cdns,tshsl-ns = <30>; + cdns,tslch-ns = <8>; + }; +}; + +/* Aquila PCIE_1 */ +&pcie0_rc { + status = "okay"; +}; + +/* Aquila PCIE_2 */ +&pcie1_rc { + status = "okay"; +}; + +&serdes2 { + status = "okay"; +}; + +&serdes4 { + status = "okay"; +}; + +&serdes_wiz2 { + status = "okay"; +}; + +&serdes_wiz4 { + status = "okay"; +}; + +/* Aquila ADC_[1-4] */ +&tscadc0 { + status = "okay"; +}; + +&usbss0 { + status = "okay"; +}; + +&usb0ss_mux { + status = "okay"; + + port { + usb0_ss_mux: endpoint { + remote-endpoint = <&usb_1_con_ss>; + }; + }; +}; + +&usb0 { + status = "okay"; + + port { + usb0_hs: endpoint { + remote-endpoint = <&usb_1_con_hs>; + }; + }; +}; + +&wkup0_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&wkup0_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&wkup0_alert1>; + }; + }; +}; + +&wkup1_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&wkup1_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&wkup1_alert1>; + }; + }; +}; + +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_04>; /* Aquila GPIO_04 */ +}; + +/* Aquila UART_2 */ +&wkup_uart0 { + status = "okay"; +}; -- 2.47.3