[PATCH v2 1/1] arm64: dts: qcom: lemans-evk: Enable Bluetooth support

[Wei Deng <wei.deng@oss.qualcomm.com>]

There's a WCN6855 WiFi/Bluetooth module on an M.2 card. To make
Bluetooth work, we need to define the necessary device tree nodes,
including UART configuration and power supplies.

Since there is no standard M.2 binding in the device tree at present,
the PMU is described using dedicated PMU nodes to represent the
internal regulators required by the module.

The module provides a 3.3V supply, which originates from the
main board’s 12V rail. To represent this power hierarchy in the device
tree, add a fixed 12V regulator node as the DC-IN source and link it
to the 3.3V regulator node.

Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 99 +++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index b40fa203e4a2..89f3f001fdcf 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -21,6 +21,7 @@ aliases {
 		ethernet0 = &ethernet0;
 		mmc1 = &sdhc;
 		serial0 = &uart10;
+		serial1 = &uart17;
 	};
 
 	dmic: audio-codec-0 {
@@ -110,6 +111,17 @@ vmmc_sdc: regulator-vmmc-sdc {
 		regulator-max-microvolt = <2950000>;
 	};
 
+	vreg_dcin_12v: regulator-dcin-12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_DCIN_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vreg_sdc: regulator-vreg-sdc {
 		compatible = "regulator-gpio";
 
@@ -123,6 +135,75 @@ vreg_sdc: regulator-vreg-sdc {
 
 		startup-delay-us = <100>;
 	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_dcin_12v>;
+
+		regulator-boot-on;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		vddio-supply = <&vreg_wcn_3p3>;
+		vddaon-supply = <&vreg_wcn_3p3>;
+		vddpmu-supply = <&vreg_wcn_3p3>;
+		vddpmumx-supply = <&vreg_wcn_3p3>;
+		vddpmucx-supply = <&vreg_wcn_3p3>;
+		vddrfa0p95-supply = <&vreg_wcn_3p3>;
+		vddrfa1p3-supply = <&vreg_wcn_3p3>;
+		vddrfa1p9-supply = <&vreg_wcn_3p3>;
+		vddpcielp3-supply = <&vreg_wcn_3p3>;
+		vddpcielp9-supply = <&vreg_wcn_3p3>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -761,6 +842,24 @@ &uart10 {
 	status = "okay";
 };
 
+&uart17 {
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		max-speed = <3200000>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l8a>;
-- 
2.25.1