mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Haotian Zhang <vulab@iscas.ac.cn>
To: wim@linux-watchdog.org, linux@roeck-us.net
Cc: linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org,
	Haotian Zhang <vulab@iscas.ac.cn>
Subject: [PATCH v2] watchdog: wdat_wdt: Fix ACPI table leak in probe function
Date: Thu, 13 Nov 2025 10:30:32 +0800	[thread overview]
Message-ID: <20251113023032.547-1-vulab@iscas.ac.cn> (raw)

wdat_wdt_probe() calls acpi_get_table() to obtain the WDAT ACPI table but
never calls acpi_put_table() on any paths. This causes a permanent ACPI
table memory leak.

Add a single cleanup path which calls acpi_put_table() to ensure
the ACPI table is always released.

Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
---
Changes in v2:
  -Remove unnecessary initialization.
  -Correct the patch description, since the v1 patch already
   free table on both error and success paths.
---
 drivers/watchdog/wdat_wdt.c | 64 +++++++++++++++++++++++++------------
 1 file changed, 43 insertions(+), 21 deletions(-)

diff --git a/drivers/watchdog/wdat_wdt.c b/drivers/watchdog/wdat_wdt.c
index 650fdc7996e1..dd3c2d69c9df 100644
--- a/drivers/watchdog/wdat_wdt.c
+++ b/drivers/watchdog/wdat_wdt.c
@@ -326,19 +326,27 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	wdat = devm_kzalloc(dev, sizeof(*wdat), GFP_KERNEL);
-	if (!wdat)
-		return -ENOMEM;
+	if (!wdat) {
+		ret = -ENOMEM;
+		goto out_put_table;
+	}
 
 	regs = devm_kcalloc(dev, pdev->num_resources, sizeof(*regs),
 			    GFP_KERNEL);
-	if (!regs)
-		return -ENOMEM;
+	if (!regs) {
+		ret = -ENOMEM;
+		goto out_put_table;
+	}
 
 	/* WDAT specification wants to have >= 1ms period */
-	if (tbl->timer_period < 1)
-		return -EINVAL;
-	if (tbl->min_count > tbl->max_count)
-		return -EINVAL;
+	if (tbl->timer_period < 1) {
+		ret = -EINVAL;
+		goto out_put_table;
+	}
+	if (tbl->min_count > tbl->max_count) {
+		ret = -EINVAL;
+		goto out_put_table;
+	}
 
 	wdat->period = tbl->timer_period;
 	wdat->wdd.min_timeout = DIV_ROUND_UP(wdat->period * tbl->min_count, 1000);
@@ -355,15 +363,20 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 		res = &pdev->resource[i];
 		if (resource_type(res) == IORESOURCE_MEM) {
 			reg = devm_ioremap_resource(dev, res);
-			if (IS_ERR(reg))
-				return PTR_ERR(reg);
+			if (IS_ERR(reg)) {
+				ret = PTR_ERR(reg);
+				goto out_put_table;
+			}
 		} else if (resource_type(res) == IORESOURCE_IO) {
 			reg = devm_ioport_map(dev, res->start, 1);
-			if (!reg)
-				return -ENOMEM;
+			if (!reg) {
+				ret = -ENOMEM;
+				goto out_put_table;
+			}
 		} else {
 			dev_err(dev, "Unsupported resource\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out_put_table;
 		}
 
 		regs[i] = reg;
@@ -385,8 +398,10 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 		}
 
 		instr = devm_kzalloc(dev, sizeof(*instr), GFP_KERNEL);
-		if (!instr)
-			return -ENOMEM;
+		if (!instr) {
+			ret = -ENOMEM;
+			goto out_put_table;
+		}
 
 		INIT_LIST_HEAD(&instr->node);
 		instr->entry = entries[i];
@@ -417,7 +432,8 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 
 		if (!instr->reg) {
 			dev_err(dev, "I/O resource not found\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out_put_table;
 		}
 
 		instructions = wdat->instructions[action];
@@ -425,8 +441,10 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 			instructions = devm_kzalloc(dev,
 						    sizeof(*instructions),
 						    GFP_KERNEL);
-			if (!instructions)
-				return -ENOMEM;
+			if (!instructions) {
+				ret = -ENOMEM;
+				goto out_put_table;
+			}
 
 			INIT_LIST_HEAD(instructions);
 			wdat->instructions[action] = instructions;
@@ -443,7 +461,7 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 
 	ret = wdat_wdt_enable_reboot(wdat);
 	if (ret)
-		return ret;
+		goto out_put_table;
 
 	platform_set_drvdata(pdev, wdat);
 
@@ -460,12 +478,16 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 
 	ret = wdat_wdt_set_timeout(&wdat->wdd, timeout);
 	if (ret)
-		return ret;
+		goto out_put_table;
 
 	watchdog_set_nowayout(&wdat->wdd, nowayout);
 	watchdog_stop_on_reboot(&wdat->wdd);
 	watchdog_stop_on_unregister(&wdat->wdd);
-	return devm_watchdog_register_device(dev, &wdat->wdd);
+	ret = devm_watchdog_register_device(dev, &wdat->wdd);
+
+out_put_table:
+	acpi_put_table((struct acpi_table_header *)tbl);
+	return ret;
 }
 
 static int wdat_wdt_suspend_noirq(struct device *dev)
-- 
2.50.1.windows.1


             reply	other threads:[~2025-11-13  2:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-13  2:30 Haotian Zhang [this message]
2025-11-13 19:31 ` Guenter Roeck
2025-11-16 20:21 ` Markus Elfring
2025-11-17 19:06 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251113023032.547-1-vulab@iscas.ac.cn \
    --to=vulab@iscas.ac.cn \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®