From: Tanmay Shah <tanmay.shah@amd.com>
To: <andersson@kernel.org>, <mathieu.poirier@linaro.org>
Cc: <linux-remoteproc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Tanmay Shah <tanmay.shah@amd.com>
Subject: [PATCH v2 3/3] remoteproc: xlnx: add crash detection mechanism
Date: Thu, 13 Nov 2025 07:44:04 -0800 [thread overview]
Message-ID: <20251113154403.2454319-4-tanmay.shah@amd.com> (raw)
In-Reply-To: <20251113154403.2454319-1-tanmay.shah@amd.com>
Remote processor will report the crash reason via the resource table
and notify the host via kick. The host checks this crash reason on
every kick notification from the remote and report to the core
framework. Then the rproc core framework will start the recovery
process.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
---
Changes in v2:
- clear attach recovery boot flag during detach and stop ops
drivers/remoteproc/xlnx_r5_remoteproc.c | 56 +++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index 8677b732ad14..5d04e8c0dc52 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -108,6 +108,10 @@ struct rsc_tbl_data {
const uintptr_t rsc_tbl;
} __packed;
+enum fw_vendor_rsc {
+ FW_RSC_VENDOR_CRASH_REASON = RSC_VENDOR_START,
+};
+
/*
* Hardcoded TCM bank values. This will stay in driver to maintain backward
* compatibility with device-tree that does not have TCM information.
@@ -127,9 +131,21 @@ static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
{0xffe30000UL, 0x30000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};
+/**
+ * struct xlnx_rproc_crash_report - resource to know crash status and reason
+ *
+ * @crash_state: if true, the rproc is notifying crash, time to recover
+ * @crash_reason: reason of crash
+ */
+struct xlnx_rproc_crash_report {
+ u32 crash_state;
+ u32 crash_reason;
+} __packed;
+
/**
* struct zynqmp_r5_core - remoteproc core's internal data
*
+ * @crash_report: rproc crash state and reason
* @rsc_tbl_va: resource table virtual address
* @sram: Array of sram memories assigned to this core
* @num_sram: number of sram for this core
@@ -143,6 +159,7 @@ static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
* @ipi: pointer to mailbox information
*/
struct zynqmp_r5_core {
+ struct xlnx_rproc_crash_report *crash_report;
void __iomem *rsc_tbl_va;
struct zynqmp_sram_bank *sram;
int num_sram;
@@ -227,10 +244,14 @@ static void handle_event_notified(struct work_struct *work)
static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *msg)
{
struct zynqmp_ipi_message *ipi_msg, *buf_msg;
+ struct zynqmp_r5_core *r5_core;
+ struct rproc *rproc;
struct mbox_info *ipi;
size_t len;
ipi = container_of(cl, struct mbox_info, mbox_cl);
+ r5_core = ipi->r5_core;
+ rproc = r5_core->rproc;
/* copy data from ipi buffer to r5_core */
ipi_msg = (struct zynqmp_ipi_message *)msg;
@@ -244,6 +265,13 @@ static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *msg)
buf_msg->len = len;
memcpy(buf_msg->data, ipi_msg->data, len);
+ /* Check for crash only if rproc crash is expected */
+ if (rproc->state == RPROC_ATTACHED || rproc->state == RPROC_RUNNING) {
+ if (r5_core->crash_report->crash_state)
+ rproc_report_crash(rproc,
+ r5_core->crash_report->crash_reason);
+ }
+
/* received and processed interrupt ack */
if (mbox_send_message(ipi->rx_chan, NULL) < 0)
dev_err(cl->dev, "ack failed to mbox rx_chan\n");
@@ -397,6 +425,7 @@ static int zynqmp_r5_rproc_start(struct rproc *rproc)
if (ret)
dev_err(r5_core->dev,
"failed to start RPU = 0x%x\n", r5_core->pm_domain_id);
+
return ret;
}
@@ -438,6 +467,8 @@ static int zynqmp_r5_rproc_stop(struct rproc *rproc)
if (ret)
dev_err(r5_core->dev, "core force power down failed\n");
+ test_and_clear_bit(RPROC_FEAT_ATTACH_ON_RECOVERY, rproc->features);
+
return ret;
}
@@ -874,6 +905,8 @@ static int zynqmp_r5_get_rsc_table_va(struct zynqmp_r5_core *r5_core)
static int zynqmp_r5_attach(struct rproc *rproc)
{
+ rproc_set_feature(rproc, RPROC_FEAT_ATTACH_ON_RECOVERY);
+
dev_dbg(&rproc->dev, "rproc %d attached\n", rproc->index);
return 0;
@@ -888,6 +921,8 @@ static int zynqmp_r5_detach(struct rproc *rproc)
*/
zynqmp_r5_rproc_kick(rproc, 0);
+ clear_bit(RPROC_FEAT_ATTACH_ON_RECOVERY, rproc->features);
+
return 0;
}
@@ -896,6 +931,26 @@ static void zynqmp_r5_coredump(struct rproc *rproc)
(void)rproc;
}
+static int zynqmp_r5_handle_crash_rsc(struct rproc *rproc, void *rsc,
+ int offset, int avail)
+{
+ struct zynqmp_r5_core *r5_core = rproc->priv;
+
+ r5_core->crash_report =
+ (struct xlnx_rproc_crash_report *)(r5_core->rsc_tbl_va + offset);
+
+ return RSC_HANDLED;
+}
+
+static int zynqmp_r5_handle_rsc(struct rproc *rproc, u32 rsc_type, void *rsc,
+ int offset, int avail)
+{
+ if (rsc_type == FW_RSC_VENDOR_CRASH_REASON)
+ return zynqmp_r5_handle_crash_rsc(rproc, rsc, offset, avail);
+
+ return RSC_IGNORED;
+}
+
static const struct rproc_ops zynqmp_r5_rproc_ops = {
.prepare = zynqmp_r5_rproc_prepare,
.unprepare = zynqmp_r5_rproc_unprepare,
@@ -911,6 +966,7 @@ static const struct rproc_ops zynqmp_r5_rproc_ops = {
.attach = zynqmp_r5_attach,
.detach = zynqmp_r5_detach,
.coredump = zynqmp_r5_coredump,
+ .handle_rsc = zynqmp_r5_handle_rsc,
};
/**
--
2.34.1
next prev parent reply other threads:[~2025-11-13 15:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-13 15:44 [PATCH 0/3] remoteproc: xlnx: remote crash recovery Tanmay Shah
2025-11-13 15:44 ` [PATCH v2 1/3] remoteproc: xlnx: enable boot recovery Tanmay Shah
2025-11-20 17:50 ` Mathieu Poirier
2025-12-01 21:04 ` Tanmay Shah
2025-11-13 15:44 ` [PATCH v2 2/3] remoteproc: core: full attach detach during recovery Tanmay Shah
2025-11-20 17:58 ` Mathieu Poirier
2025-12-01 23:05 ` Tanmay Shah
2025-11-13 15:44 ` Tanmay Shah [this message]
2025-11-21 15:37 ` [PATCH v2 3/3] remoteproc: xlnx: add crash detection mechanism Mathieu Poirier
2025-12-02 5:04 ` Tanmay Shah
2025-12-02 15:05 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251113154403.2454319-4-tanmay.shah@amd.com \
--to=tanmay.shah@amd.com \
--cc=andersson@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®