[PATCH v2] Documentation: thermal: Add documentation for thermal throttle

[Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>]

Add documentation for Intel thermal throttling reporting events.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
v2:
 - Addressed comments from Rafael
 - Limit line lengths ~80 columns

 Documentation/admin-guide/thermal/index.rst   |  1 +
 .../admin-guide/thermal/thermal_throttle.rst  | 92 +++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 Documentation/admin-guide/thermal/thermal_throttle.rst

diff --git a/Documentation/admin-guide/thermal/index.rst b/Documentation/admin-guide/thermal/index.rst
index 193b7b01a87d..2e0cafd19f6b 100644
--- a/Documentation/admin-guide/thermal/index.rst
+++ b/Documentation/admin-guide/thermal/index.rst
@@ -6,3 +6,4 @@ Thermal Subsystem
    :maxdepth: 1
 
    intel_powerclamp
+   thermal_throttle
diff --git a/Documentation/admin-guide/thermal/thermal_throttle.rst b/Documentation/admin-guide/thermal/thermal_throttle.rst
new file mode 100644
index 000000000000..cac2bc3176ce
--- /dev/null
+++ b/Documentation/admin-guide/thermal/thermal_throttle.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=======================================
+Intel thermal throttle events reporting
+=======================================
+
+:Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+
+Introduction
+------------
+
+Intel processors have built in automatic and adaptive thermal monitoring
+mechanisms that force the processor to reduce its power consumption in order
+to operate within predetermined temperature limits.
+
+Refer to section "THERMAL MONITORING AND PROTECTION" in the "Intel® 64 and
+IA-32 Architectures Software Developer’s Manual Volume 3 (3A, 3B, 3C, & 3D):
+System Programming Guide" for more details.
+
+In general, there are two mechanisms to control the core temperature of the
+processor. They are called "Thermal Monitor 1 (TM1) and Thermal Monitor 2 (TM2)".
+
+The status of the temperature sensor that triggers the thermal monitor (TM1/TM2)
+is indicated through the "thermal status flag" and "thermal status log flag" in
+the MSR_IA32_THERM_STATUS for core level and MSR_IA32_PACKAGE_THERM_STATUS for
+package level.
+
+Thermal Status flag, bit 0 — When set, indicates that the processor core
+temperature is currently at the trip temperature of the thermal monitor and that
+the processor power consumption is being reduced via either TM1 or TM2, depending
+on which is enabled. When clear, the flag indicates that the core temperature is
+below the thermal monitor trip temperature. This flag is read only.
+
+Thermal Status Log flag, bit 1 — When set, indicates that the thermal sensor has
+tripped since the last power-up or reset or since the last time that software
+cleared this flag. This flag is a sticky bit; once set it remains set until
+cleared by software or until a power-up or reset of the processor. The default
+state is clear.
+
+It is possible that when user reads MSR_IA32_THERM_STATUS or
+MSR_IA32_PACKAGE_THERM_STATUS, TM1/TM2 is not active. In this case,
+"Thermal Status flag" will read "0" and the "Thermal Status Log flag" will be set
+to show any previous "TM1/TM2" activation. But since it needs to be cleared by
+the software, it can't show the number of occurrences of "TM1/TM2" activations.
+
+Hence, Linux provides counters of how many times the "Thermal Status flag" was
+set. Also presents how long the "Thermal Status flag" was active in milliseconds.
+Using these counters, users can check if the performance was limited because of
+thermal events. It is recommended to read from sysfs instead of directly reading
+MSRs as the "Thermal Status Log flag" is reset by the driver to implement rate
+control.
+
+Sysfs Interface
+---------------
+
+Thermal throttling events are presented for each CPU under
+"/sys/devices/system/cpu/cpuX/thermal_throttle/", where "X" is the CPU number.
+
+All these counters are read-only. They can't be reset to 0. So, they can potentially
+overflow after reaching the maximum 64 bit unsigned integer.
+
+``core_throttle_count``
+	This shows number of times "Thermal Status flag" changed from 0 to 1 for this
+	CPU since OS boot and thermal vector is initialized. This is a 64 bit counter.
+
+``package_throttle_count``
+	This shows number of times "Thermal Status flag" changed from 0 to 1 for the
+	package containing this CPU since OS boot and thermal vector is initialized.
+	Package status is broadcast to all CPUs; all CPUs in the package increment
+	this count. This is a 64-bit counter.
+
+``core_throttle_max_time_ms``
+	This shows the maximum amount of time for which "Thermal Status flag"
+	has been set to 1 for this CPU at the core level since OS boot and thermal
+	vector is initialized.
+
+``package_throttle_max_time_ms``
+	This shows the maximum amount of time for which "Thermal Status flag"
+	has been set to 1 for the package containing this CPU since OS boot and
+	thermal vector is initialized.
+
+``core_throttle_total_time_ms``
+	This shows the cumulative time for which "Thermal Status flag" has been
+	set to 1 for this CPU for core level since OS boot and thermal vector
+	is initialized.
+
+``package_throttle_total_time_ms``
+	This shows the cumulative time for which "Thermal Status flag" has been set
+	to 1 for the package containing this CPU since OS boot and thermal vector is
+	initialized.
+
-- 
2.43.0