[PATCH] leds: rgb: leds-qcom-lpg: Only enable TRILED when LPG is used by LED

[Fenglin Wu via B4 Relay <devnull+fenglin.wu.oss.qualcomm.com@kernel.org>]

From: Fenglin Wu <fenglin.wu@oss.qualcomm.com>

Enabling the TRILED channel will cause a voltage increase on its power
supply, which is unnecessary if the LPG channel is not being used to
control an LED.

Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
---
 drivers/leds/rgb/leds-qcom-lpg.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 4f2a178e3d265a2cc88e651d3e2ca6ae3dfac2e2..234059b4c0f49d0398030ae5f86967fc1905206d 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2017-2022 Linaro Ltd
  * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
- * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
  */
 #include <linux/bits.h>
 #include <linux/bitfield.h>
@@ -1247,7 +1247,9 @@ static int lpg_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	lpg_apply(chan);
 
-	triled_set(lpg, chan->triled_mask, chan->enabled ? chan->triled_mask : 0);
+	/* Only control TRILED if the LPG channel is used by TRILED */
+	if (chan->in_use && chan->triled_mask)
+		triled_set(lpg, chan->triled_mask, chan->enabled ? chan->triled_mask : 0);
 
 out_unlock:
 	mutex_unlock(&lpg->lock);

---
base-commit: ea1c4c7e648d1ca91577071fc42fdc219521098c
change-id: 20251114-lpg_triled_fix-44491b49b340

Best regards,
-- 
Fenglin Wu <fenglin.wu@oss.qualcomm.com>