From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: kbusch@kernel.org, chang.seok.bae@intel.com
Subject: [PATCH 05/10] KVM: emulate: share common register decoding code
Date: Thu, 13 Nov 2025 19:36:28 -0500 [thread overview]
Message-ID: <20251114003633.60689-6-pbonzini@redhat.com> (raw)
In-Reply-To: <20251114003633.60689-1-pbonzini@redhat.com>
Remove all duplicate handling of register operands, including picking
the right register class and fetching it, by extracting a new function
that can be used for both REG and MODRM operands.
Centralize setting op->orig_val = op->val in fetch_register_operand()
as well.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/kvm/emulate.c | 49 +++++++++++++++---------------------------
1 file changed, 17 insertions(+), 32 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 7ef791407dbc..6c8d3f786e74 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1026,6 +1026,7 @@ static void fetch_register_operand(struct operand *op)
op->val = *(u64 *)op->addr.reg;
break;
}
+ op->orig_val = op->val;
}
static int em_fninit(struct x86_emulate_ctxt *ctxt)
@@ -1071,16 +1072,9 @@ static int em_fnstsw(struct x86_emulate_ctxt *ctxt)
return X86EMUL_CONTINUE;
}
-static void decode_register_operand(struct x86_emulate_ctxt *ctxt,
- struct operand *op)
+static void __decode_register_operand(struct x86_emulate_ctxt *ctxt,
+ struct operand *op, int reg)
{
- unsigned int reg;
-
- if (ctxt->d & ModRM)
- reg = ctxt->modrm_reg;
- else
- reg = (ctxt->b & 7) | ((ctxt->rex_prefix & 1) << 3);
-
if (ctxt->d & Sse) {
op->type = OP_XMM;
op->bytes = 16;
@@ -1099,9 +1093,20 @@ static void decode_register_operand(struct x86_emulate_ctxt *ctxt,
op->type = OP_REG;
op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
op->addr.reg = decode_register(ctxt, reg, ctxt->d & ByteOp);
-
fetch_register_operand(op);
- op->orig_val = op->val;
+}
+
+static void decode_register_operand(struct x86_emulate_ctxt *ctxt,
+ struct operand *op)
+{
+ unsigned int reg;
+
+ if (ctxt->d & ModRM)
+ reg = ctxt->modrm_reg;
+ else
+ reg = (ctxt->b & 7) | ((ctxt->rex_prefix & 1) << 3);
+
+ __decode_register_operand(ctxt, op, reg);
}
static void adjust_modrm_seg(struct x86_emulate_ctxt *ctxt, int base_reg)
@@ -1128,24 +1133,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
ctxt->modrm_seg = VCPU_SREG_DS;
if (ctxt->modrm_mod == 3 || (ctxt->d & NoMod)) {
- op->type = OP_REG;
- op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
- op->addr.reg = decode_register(ctxt, ctxt->modrm_rm,
- ctxt->d & ByteOp);
- if (ctxt->d & Sse) {
- op->type = OP_XMM;
- op->bytes = 16;
- op->addr.xmm = ctxt->modrm_rm;
- kvm_read_sse_reg(ctxt->modrm_rm, &op->vec_val);
- return rc;
- }
- if (ctxt->d & Mmx) {
- op->type = OP_MM;
- op->bytes = 8;
- op->addr.mm = ctxt->modrm_rm & 7;
- return rc;
- }
- fetch_register_operand(op);
+ __decode_register_operand(ctxt, op, ctxt->modrm_rm);
return rc;
}
@@ -4619,14 +4607,12 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RAX);
fetch_register_operand(op);
- op->orig_val = op->val;
break;
case OpAccLo:
op->type = OP_REG;
op->bytes = (ctxt->d & ByteOp) ? 2 : ctxt->op_bytes;
op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RAX);
fetch_register_operand(op);
- op->orig_val = op->val;
break;
case OpAccHi:
if (ctxt->d & ByteOp) {
@@ -4637,7 +4623,6 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
op->bytes = ctxt->op_bytes;
op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RDX);
fetch_register_operand(op);
- op->orig_val = op->val;
break;
case OpDI:
op->type = OP_MEM;
--
2.43.5
next prev parent reply other threads:[~2025-11-14 0:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-14 0:36 [PATCH 00/10] KVM: emulate: enable AVX moves Paolo Bonzini
2025-11-14 0:36 ` [PATCH 01/10] KVM: emulate: add MOVNTDQA Paolo Bonzini
2025-11-14 0:36 ` [PATCH 02/10] KVM: emulate: move Src2Shift up one bit Paolo Bonzini
2025-11-17 19:51 ` Chang S. Bae
2025-11-14 0:36 ` [PATCH 03/10] KVM: emulate: improve formatting of flags table Paolo Bonzini
2025-11-17 19:53 ` Chang S. Bae
2025-11-14 0:36 ` [PATCH 04/10] KVM: emulate: move op_prefix to struct x86_emulate_ctxt Paolo Bonzini
2025-11-17 19:54 ` Chang S. Bae
2025-11-14 0:36 ` Paolo Bonzini [this message]
2025-11-17 19:55 ` [PATCH 05/10] KVM: emulate: share common register decoding code Chang S. Bae
2025-11-14 0:36 ` [PATCH 06/10] KVM: emulate: add get_xcr callback Paolo Bonzini
2025-11-17 19:56 ` Chang S. Bae
2025-11-14 0:36 ` [PATCH 07/10] KVM: emulate: add AVX support to register fetch and writeback Paolo Bonzini
2025-11-14 17:06 ` kernel test robot
2025-11-14 20:10 ` kernel test robot
2025-11-14 0:36 ` [PATCH 08/10] KVM: x86: Refactor REX prefix handling in instruction emulation Paolo Bonzini
2025-11-17 19:56 ` Chang S. Bae
2025-11-14 0:36 ` [PATCH 09/10] KVM: emulate: decode VEX prefix Paolo Bonzini
2025-11-14 0:36 ` [PATCH 10/10] KVM: emulate: enable AVX moves Paolo Bonzini
2025-11-14 0:51 ` [PATCH 00/10] " Keith Busch
2025-11-17 19:57 ` Chang S. Bae
2025-11-21 18:55 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251114003633.60689-6-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=chang.seok.bae@intel.com \
--cc=kbusch@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®