[PATCH] extcon: ptn5150: handle pending IRQ events during system resume

[Xu Yang <xu.yang_2@nxp.com>]

When the system is suspended and ptn5150 wakeup interrupt is disabled,
any changes on ptn5150 will only be record in interrupt status
registers and won't fire an IRQ since its trigger type is falling
edge. So the HW interrupt line will keep at low state and any further
changes won't trigger IRQ anymore. To fix it, this will schedule a
work to check whether any IRQ are pending and handle it accordingly.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
 drivers/extcon/extcon-ptn5150.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 78ad86c4a3be..4f7dbba5accd 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -331,6 +331,19 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
 	return 0;
 }
 
+static int ptn5150_resume(struct device *dev)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct ptn5150_info *info = i2c_get_clientdata(i2c);
+
+	/* Need to check possible pending interrupt events */
+	schedule_work(&info->irq_work);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_DEV_PM_OPS(ptn5150_pm_ops, NULL, ptn5150_resume);
+
 static const struct of_device_id ptn5150_dt_match[] = {
 	{ .compatible = "nxp,ptn5150" },
 	{ },
@@ -346,6 +359,7 @@ MODULE_DEVICE_TABLE(i2c, ptn5150_i2c_id);
 static struct i2c_driver ptn5150_i2c_driver = {
 	.driver		= {
 		.name	= "ptn5150",
+		.pm = pm_sleep_ptr(&ptn5150_pm_ops),
 		.of_match_table = ptn5150_dt_match,
 	},
 	.probe		= ptn5150_i2c_probe,
-- 
2.34.1