mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Subject: [PATCH 6/6] serial: 8250_platform: simplify IRQF_SHARED handling
Date: Wed, 19 Nov 2025 10:24:57 +0100	[thread overview]
Message-ID: <20251119092457.826789-7-jirislaby@kernel.org> (raw)
In-Reply-To: <20251119092457.826789-1-jirislaby@kernel.org>

IRQF_SHARED is the only flag handled in __serial8250_isa_init_ports()
and serial8250_probe_platform(). There is no need to precompute the
flags. Instead, initialize port->irqflags directly in the for loop.

Note the "if (bool)" is cheap and these are not hot paths anyway.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
---
 drivers/tty/serial/8250/8250_platform.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c
index 4c1166a46a1f..af16a36193bf 100644
--- a/drivers/tty/serial/8250/8250_platform.c
+++ b/drivers/tty/serial/8250/8250_platform.c
@@ -58,7 +58,7 @@ EXPORT_SYMBOL(serial8250_set_isa_configurator);
 
 static void __init __serial8250_isa_init_ports(void)
 {
-	int i, irqflag = 0;
+	int i;
 
 	if (nr_uarts > UART_NR)
 		nr_uarts = UART_NR;
@@ -75,9 +75,6 @@ static void __init __serial8250_isa_init_ports(void)
 	univ8250_port_ops = *univ8250_port_base_ops;
 	univ8250_rsa_support(&univ8250_port_ops);
 
-	if (share_irqs)
-		irqflag = IRQF_SHARED;
-
 	for (i = 0; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++) {
 		struct uart_8250_port *up = serial8250_get_port(i);
 		struct uart_port *port = &up->port;
@@ -92,7 +89,9 @@ static void __init __serial8250_isa_init_ports(void)
 		port->iotype   = old_serial_port[i].io_type;
 		port->regshift = old_serial_port[i].iomem_reg_shift;
 
-		port->irqflags |= irqflag;
+		if (share_irqs)
+			port->irqflags |= IRQF_SHARED;
+
 		if (serial8250_isa_config != NULL)
 			serial8250_isa_config(i, &up->port, &up->capabilities);
 	}
@@ -155,15 +154,12 @@ static int serial8250_probe_acpi(struct platform_device *pdev)
 
 static int serial8250_probe_platform(struct platform_device *dev, struct plat_serial8250_port *p)
 {
-	int ret, i, irqflag = 0;
+	int ret, i;
 
 	struct uart_8250_port *uart __free(kfree) = kzalloc(sizeof(*uart), GFP_KERNEL);
 	if (!uart)
 		return -ENOMEM;
 
-	if (share_irqs)
-		irqflag = IRQF_SHARED;
-
 	for (i = 0; p && p->flags != 0; p++, i++) {
 		uart->port.iobase	= p->iobase;
 		uart->port.membase	= p->membase;
@@ -191,7 +187,10 @@ static int serial8250_probe_platform(struct platform_device *dev, struct plat_se
 		uart->port.get_mctrl	= p->get_mctrl;
 		uart->port.pm		= p->pm;
 		uart->port.dev		= &dev->dev;
-		uart->port.irqflags	|= irqflag;
+
+		if (share_irqs)
+			uart->port.irqflags |= IRQF_SHARED;
+
 		ret = serial8250_register_8250_port(uart);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
-- 
2.51.1


      parent reply	other threads:[~2025-11-19  9:25 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-19  9:24 [PATCH 0/6] tty cleanup for 6.19 or later Jiri Slaby (SUSE)
2025-11-19  9:24 ` [PATCH 1/6] tty: vt: do not open code DIV_ROUND_UP() Jiri Slaby (SUSE)
2025-11-19  9:24 ` [PATCH 2/6] serial: xilinx_uartps: drop cdns_uart::cdns_uart_driver Jiri Slaby (SUSE)
2025-11-20  7:30   ` Michal Simek
2025-11-19  9:24 ` [PATCH 3/6] serial: drop SERIAL_8250_DEPRECATED_OPTIONS Jiri Slaby (SUSE)
2025-11-19  9:24 ` [PATCH 4/6] serial: 8250: move skip_txen_test to core Jiri Slaby (SUSE)
2025-11-19  9:24 ` [PATCH 5/6] serial: 8250: make share_irqs local to 8250_platform Jiri Slaby (SUSE)
2025-11-19  9:24 ` Jiri Slaby (SUSE) [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251119092457.826789-7-jirislaby@kernel.org \
    --to=jirislaby@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®