From: Riccardo Mereu <r.mereu.kernel@arduino.cc>
To: andersson@kernel.org, konradybcio@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, broonie@kernel.org
Cc: linux@roeck-us.net, Jonathan.Cameron@huawei.com,
wenswang@yeah.net, naresh.solanki@9elements.com,
michal.simek@amd.com, nuno.sa@analog.com, chou.cosmo@gmail.com,
grantpeltier93@gmail.com, eajames@linux.ibm.com,
farouk.bouabid@cherry.de, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-spi@vger.kernel.org, m.facchin@arduino.cc,
Riccardo Mereu <r.mereu@arduino.cc>
Subject: [PATCH v3 0/6] arm64: qcom: add support for Arduino UnoQ SBC
Date: Thu, 20 Nov 2025 16:58:19 +0100 [thread overview]
Message-ID: <20251120155825.121483-1-r.mereu.kernel@arduino.cc> (raw)
From: Riccardo Mereu <r.mereu@arduino.cc>
This patch series adds support for Arduino UnoQ single board computer.
UnoQ combines Qualcomm QRB2210 microprocessor and STMicroelectronics
STM32U585 microcontroller.
In some files we decided to keep UnoQ code name as "imola".
As this platform has a microcontroller connected to the microprocessor
we needed a dedicated spidev and to add uart2 to qcm2290.dtsi file; both
are used as interfaces between microprocessor and microcontroller.
Some GPIOs on the JMISC connector have been defined but not used in
qrb2210-arduino-imola.dts; this is meant to facilitate carrier dtbo
development for users.
Changes since v2:
- In PATCH 1/6 the vendor name has been corrected to "Arduino SRL".
- In PATCH 2/6 and 3/6 commit message has been improved to clarify the
purpose of adding "arduino,unoq-mcu" as trivial device.
- In PATCH 6/6:
* the qcom,ath10k-calibration-variant has been changed to "ArduinoImola"
* leds labels have been changed to simplify usage for users and make
them more consistent with future Arduino carriers for UnoQ.
- For every patch, warning regarding mail mismatch when running
checkpatch should be fixed.
Riccardo Mereu (6):
dt-bindings: vendor-prefixes: Add Arduino name
dt-bindings: trivial-devices: add arduino spi mcu interface
spi: spidev: add compatible for arduino spi mcu interface
dt-bindings: arm: qcom: Add arduino imola, UnoQ codename
arm64: dts: qcom: agatti: add uart2 node
arm64: dts: qcom: qrb2210: add dts for Arduino unoq
.../devicetree/bindings/arm/qcom.yaml | 1 +
.../devicetree/bindings/trivial-devices.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/agatti.dtsi | 24 +
.../boot/dts/qcom/qrb2210-arduino-imola.dts | 459 ++++++++++++++++++
drivers/spi/spidev.c | 2 +
7 files changed, 491 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
--
2.52.0
next reply other threads:[~2025-11-20 15:58 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-20 15:58 Riccardo Mereu [this message]
2025-11-20 15:58 ` [PATCH v3 1/6] dt-bindings: vendor-prefixes: Add Arduino name Riccardo Mereu
2025-11-20 16:56 ` Krzysztof Kozlowski
2025-11-20 15:58 ` [PATCH v3 2/6] dt-bindings: trivial-devices: add arduino spi mcu interface Riccardo Mereu
2025-11-20 16:57 ` Krzysztof Kozlowski
2025-11-20 15:58 ` [PATCH v3 3/6] spi: spidev: add compatible for " Riccardo Mereu
2025-11-20 16:57 ` Krzysztof Kozlowski
2025-11-20 15:58 ` [PATCH v3 4/6] dt-bindings: arm: qcom: Add arduino imola, UnoQ codename Riccardo Mereu
2025-11-20 15:58 ` [PATCH v3 5/6] arm64: dts: qcom: agatti: add uart2 node Riccardo Mereu
2025-11-20 15:58 ` [PATCH v3 6/6] arm64: dts: qcom: qrb2210: add dts for Arduino unoq Riccardo Mereu
2025-11-20 16:59 ` Krzysztof Kozlowski
2025-11-21 14:05 ` Dmitry Baryshkov
2025-11-24 11:44 ` Konrad Dybcio
2025-11-26 9:27 ` Riccardo Mereu Linux Kernel
2025-11-26 14:03 ` Loic Poulain
2025-11-27 10:35 ` Konrad Dybcio
2025-11-21 14:39 ` (subset) [PATCH v3 0/6] arm64: qcom: add support for Arduino UnoQ SBC Mark Brown
2026-01-05 14:07 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251120155825.121483-1-r.mereu.kernel@arduino.cc \
--to=r.mereu.kernel@arduino.cc \
--cc=Jonathan.Cameron@huawei.com \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=chou.cosmo@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eajames@linux.ibm.com \
--cc=farouk.bouabid@cherry.de \
--cc=grantpeltier93@gmail.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=m.facchin@arduino.cc \
--cc=michal.simek@amd.com \
--cc=naresh.solanki@9elements.com \
--cc=nuno.sa@analog.com \
--cc=r.mereu@arduino.cc \
--cc=robh@kernel.org \
--cc=wenswang@yeah.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®