From: Yu-Chun Lin <eleanor.lin@realtek.com>
To: <afaerber@suse.de>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <lee@kernel.org>, <james.tai@realtek.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-realtek-soc@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<cy.huang@realtek.com>, <stanley_chang@realtek.com>,
<eleanor.lin@realtek.com>
Subject: [PATCH v3 0/2] arm64: dts: Add support for Kent SoC family
Date: Fri, 21 Nov 2025 16:45:03 +0800 [thread overview]
Message-ID: <20251121084505.3200-1-eleanor.lin@realtek.com> (raw)
Hello,
This patch series adds initial Device Tree support for Realtek's Kent SoC
family, including the RTD1501S, RTD1861B, and RTD1920S variants with their
respective evaluation boards.
The series includes:
1. Adds compatible strings for the Kent family.
2. Add Device Tree files for the Kent SoC, TD1501S Phantom EVB (8GB),
RTD1861B Krypton EVB (8GB), and RTD1920S Smallville EVB (4GB).
The patches have been validated with 'make dtbs_check' and
'dt_binding_check' to ensure compliance with DT schema and successful
compilation.
Cheers,
Yu-Chun
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v3:
- Drop the dt-bindings patch (realtek,misc.yaml)
- Drop 'iso: syscon@7000' node and and re-parent the UART directly to rbus
- Change all dts/dtsi to license: GPL-2.0
- Drop all custom bootargs
V2: https://lore.kernel.org/lkml/20251113123009.26568-1-eleanor.lin@realtek.com/
Changes in v2:
[PATCH v2 1/3]
- Fix YAML syntax: remove duplicate blank lines
- Validated with 'make dt_binding_check'
[PATCH v2 2/3]
- Rename: realtek,iso-system.yaml -> realtek,misc.yaml
- Improve description and example: show child node (UART)
[PATCH v2 3/3]
- Reorder Makefile targets to alphabetical order.
- Rename node: use generic names ('arch_timer' -> 'timer', 'reg-bus' -> 'bus')
- Fix node naming and hex format (remove leading zeros)
- Inline overlay nodes directly into .dtsi
- Reorder properties: ranges after reg
- Remove unnecessary status and custom bootargs
V1: https://lore.kernel.org/lkml/20251105104452.6336-1-eleanor.lin@realtek.com/
Yu-Chun Lin (2):
dt-bindings: arm: realtek: Add Kent Soc family compatibles
arm64: dts: realtek: Add Kent SoC and EVB device trees
.../devicetree/bindings/arm/realtek.yaml | 42 +++--
arch/arm64/boot/dts/realtek/Makefile | 7 +-
arch/arm64/boot/dts/realtek/kent.dtsi | 166 ++++++++++++++++++
arch/arm64/boot/dts/realtek/rtd1501.dtsi | 12 ++
.../boot/dts/realtek/rtd1501s-phantom-8gb.dts | 25 +++
.../boot/dts/realtek/rtd1501s-phantom.dtsi | 118 +++++++++++++
arch/arm64/boot/dts/realtek/rtd1861.dtsi | 12 ++
.../boot/dts/realtek/rtd1861b-krypton-8gb.dts | 25 +++
.../boot/dts/realtek/rtd1861b-krypton.dtsi | 72 ++++++++
arch/arm64/boot/dts/realtek/rtd1920.dtsi | 12 ++
.../dts/realtek/rtd1920s-smallville-4gb.dts | 23 +++
.../boot/dts/realtek/rtd1920s-smallville.dtsi | 128 ++++++++++++++
12 files changed, 626 insertions(+), 16 deletions(-)
create mode 100644 arch/arm64/boot/dts/realtek/kent.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd1501.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd1501s-phantom-8gb.dts
create mode 100644 arch/arm64/boot/dts/realtek/rtd1501s-phantom.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd1861.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd1861b-krypton-8gb.dts
create mode 100644 arch/arm64/boot/dts/realtek/rtd1861b-krypton.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd1920.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd1920s-smallville-4gb.dts
create mode 100644 arch/arm64/boot/dts/realtek/rtd1920s-smallville.dtsi
--
2.34.1
next reply other threads:[~2025-11-21 8:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-21 8:45 Yu-Chun Lin [this message]
2025-11-21 8:45 ` [PATCH v3 1/2] dt-bindings: arm: realtek: Add Kent Soc family compatibles Yu-Chun Lin
2025-11-21 8:45 ` [PATCH v3 2/2] arm64: dts: realtek: Add Kent SoC and EVB device trees Yu-Chun Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251121084505.3200-1-eleanor.lin@realtek.com \
--to=eleanor.lin@realtek.com \
--cc=afaerber@suse.de \
--cc=conor+dt@kernel.org \
--cc=cy.huang@realtek.com \
--cc=devicetree@vger.kernel.org \
--cc=james.tai@realtek.com \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-realtek-soc@lists.infradead.org \
--cc=robh@kernel.org \
--cc=stanley_chang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®