From: yuanjie yang <yuanjie.yang@oss.qualcomm.com>
To: robin.clark@oss.qualcomm.com, lumag@kernel.org,
abhinav.kumar@linux.dev, sean@poorly.run,
marijn.suijten@somainline.org, airlied@gmail.com,
simona@ffwll.ch, maarten.lankhorst@linux.intel.com,
mripard@kernel.org, tzimmermann@suse.de, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
quic_mkrishn@quicinc.com, jonathan@marek.ca,
quic_khsieh@quicinc.com, neil.armstrong@linaro.org,
yuanjie.yang@oss.qualcomm.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org,
tingwei.zhang@oss.qualcomm.com, aiqun.yu@oss.qualcomm.com,
Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Subject: [PATCH v2 08/10] Add interrupt registers for DPU 13.0.0
Date: Tue, 25 Nov 2025 14:47:56 +0800 [thread overview]
Message-ID: <20251125064758.7207-9-yuanjie.yang@oss.qualcomm.com> (raw)
In-Reply-To: <20251125064758.7207-1-yuanjie.yang@oss.qualcomm.com>
From: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
DPU version 13.0.0 introduces changes to the interrupt register
layout. Update the driver to support these modifications for
proper interrupt handling.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
---
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 89 ++++++++++++++++++-
1 file changed, 88 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index 49bd77a755aa..5b7cd5241f45 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -40,6 +40,15 @@
#define MDP_INTF_REV_7xxx_INTR_TEAR_STATUS(intf) (MDP_INTF_REV_7xxx_TEAR_OFF(intf) + 0x004)
#define MDP_INTF_REV_7xxx_INTR_TEAR_CLEAR(intf) (MDP_INTF_REV_7xxx_TEAR_OFF(intf) + 0x008)
+#define MDP_INTF_REV_13xx_OFF(intf) (0x18d000 + 0x1000 * (intf))
+#define MDP_INTF_REV_13xx_INTR_EN(intf) (MDP_INTF_REV_13xx_OFF(intf) + 0x1c0)
+#define MDP_INTF_REV_13xx_INTR_STATUS(intf) (MDP_INTF_REV_13xx_OFF(intf) + 0x1c4)
+#define MDP_INTF_REV_13xx_INTR_CLEAR(intf) (MDP_INTF_REV_13xx_OFF(intf) + 0x1c8)
+#define MDP_INTF_REV_13xx_TEAR_OFF(intf) (0x18d800 + 0x1000 * (intf))
+#define MDP_INTF_REV_13xx_INTR_TEAR_EN(intf) (MDP_INTF_REV_13xx_TEAR_OFF(intf) + 0x000)
+#define MDP_INTF_REV_13xx_INTR_TEAR_STATUS(intf) (MDP_INTF_REV_13xx_TEAR_OFF(intf) + 0x004)
+#define MDP_INTF_REV_13xx_INTR_TEAR_CLEAR(intf) (MDP_INTF_REV_13xx_TEAR_OFF(intf) + 0x008)
+
/**
* struct dpu_intr_reg - array of DPU register sets
* @clr_off: offset to CLEAR reg
@@ -199,6 +208,82 @@ static const struct dpu_intr_reg dpu_intr_set_7xxx[] = {
},
};
+/*
+ * dpu_intr_set_13xx - List of DPU interrupt registers for DPU >= 13.0
+ */
+static const struct dpu_intr_reg dpu_intr_set_13xx[] = {
+ [MDP_SSPP_TOP0_INTR] = {
+ INTR_CLEAR,
+ INTR_EN,
+ INTR_STATUS
+ },
+ [MDP_SSPP_TOP0_INTR2] = {
+ INTR2_CLEAR,
+ INTR2_EN,
+ INTR2_STATUS
+ },
+ [MDP_SSPP_TOP0_HIST_INTR] = {
+ HIST_INTR_CLEAR,
+ HIST_INTR_EN,
+ HIST_INTR_STATUS
+ },
+ [MDP_INTF0_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(0),
+ MDP_INTF_REV_13xx_INTR_EN(0),
+ MDP_INTF_REV_13xx_INTR_STATUS(0)
+ },
+ [MDP_INTF1_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(1),
+ MDP_INTF_REV_13xx_INTR_EN(1),
+ MDP_INTF_REV_13xx_INTR_STATUS(1)
+ },
+ [MDP_INTF1_TEAR_INTR] = {
+ MDP_INTF_REV_13xx_INTR_TEAR_CLEAR(1),
+ MDP_INTF_REV_13xx_INTR_TEAR_EN(1),
+ MDP_INTF_REV_13xx_INTR_TEAR_STATUS(1)
+ },
+ [MDP_INTF2_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(2),
+ MDP_INTF_REV_13xx_INTR_EN(2),
+ MDP_INTF_REV_13xx_INTR_STATUS(2)
+ },
+ [MDP_INTF2_TEAR_INTR] = {
+ MDP_INTF_REV_13xx_INTR_TEAR_CLEAR(2),
+ MDP_INTF_REV_13xx_INTR_TEAR_EN(2),
+ MDP_INTF_REV_13xx_INTR_TEAR_STATUS(2)
+ },
+ [MDP_INTF3_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(3),
+ MDP_INTF_REV_13xx_INTR_EN(3),
+ MDP_INTF_REV_13xx_INTR_STATUS(3)
+ },
+ [MDP_INTF4_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(4),
+ MDP_INTF_REV_13xx_INTR_EN(4),
+ MDP_INTF_REV_13xx_INTR_STATUS(4)
+ },
+ [MDP_INTF5_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(5),
+ MDP_INTF_REV_13xx_INTR_EN(5),
+ MDP_INTF_REV_13xx_INTR_STATUS(5)
+ },
+ [MDP_INTF6_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(6),
+ MDP_INTF_REV_13xx_INTR_EN(6),
+ MDP_INTF_REV_13xx_INTR_STATUS(6)
+ },
+ [MDP_INTF7_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(7),
+ MDP_INTF_REV_13xx_INTR_EN(7),
+ MDP_INTF_REV_13xx_INTR_STATUS(7)
+ },
+ [MDP_INTF8_INTR] = {
+ MDP_INTF_REV_13xx_INTR_CLEAR(8),
+ MDP_INTF_REV_13xx_INTR_EN(8),
+ MDP_INTF_REV_13xx_INTR_STATUS(8)
+ },
+};
+
#define DPU_IRQ_MASK(irq_idx) (BIT(DPU_IRQ_BIT(irq_idx)))
static inline bool dpu_core_irq_is_valid(unsigned int irq_idx)
@@ -507,7 +592,9 @@ struct dpu_hw_intr *dpu_hw_intr_init(struct drm_device *dev,
if (!intr)
return ERR_PTR(-ENOMEM);
- if (m->mdss_ver->core_major_ver >= 7)
+ if (m->mdss_ver->core_major_ver >= 13)
+ intr->intr_set = dpu_intr_set_13xx;
+ else if (m->mdss_ver->core_major_ver >= 7)
intr->intr_set = dpu_intr_set_7xxx;
else
intr->intr_set = dpu_intr_set_legacy;
--
2.34.1
next prev parent reply other threads:[~2025-11-25 6:49 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-25 6:47 [PATCH v2 00/10] drm/msm: Add support for Kaanapali yuanjie yang
2025-11-25 6:47 ` [PATCH v2 01/10] dt-bindings: display/msm: qcom,kaanapali-dpu: Add Kaanapali yuanjie yang
2025-11-25 6:47 ` [PATCH v2 02/10] dt-bindings: display/msm: dsi-phy-7nm: Add Kaanapali DSI PHY yuanjie yang
2025-11-25 8:16 ` Krzysztof Kozlowski
2025-11-25 6:47 ` [PATCH v2 03/10] dt-bindings: display/msm: dsi-controller-main: Add Kaanapali yuanjie yang
2025-11-25 6:47 ` [PATCH v2 04/10] dt-bindings: display/msm: qcom,kaanapali-mdss: " yuanjie yang
2025-11-25 8:17 ` Krzysztof Kozlowski
2025-11-25 8:28 ` yuanjiey
2025-11-25 6:47 ` [PATCH v2 05/10] drm/msm/mdss: Add support for Kaanapali yuanjie yang
2025-11-25 14:47 ` Dmitry Baryshkov
2025-11-26 2:25 ` yuanjiey
2025-11-25 6:47 ` [PATCH v2 06/10] drm/msm/dsi/phy: " yuanjie yang
2025-11-25 14:48 ` Dmitry Baryshkov
2025-11-25 6:47 ` [PATCH v2 07/10] drm/msm/dsi: " yuanjie yang
2025-11-25 6:47 ` yuanjie yang [this message]
2025-11-25 14:50 ` [PATCH v2 08/10] Add interrupt registers for DPU 13.0.0 Dmitry Baryshkov
2025-11-26 2:21 ` yuanjiey
2025-11-25 6:47 ` [PATCH v2 09/10] drm/msm/dpu: Add Kaanapali SSPP sub-block support yuanjie yang
2025-11-25 18:21 ` Dmitry Baryshkov
2025-11-26 3:39 ` yuanjiey
2025-11-25 6:47 ` [PATCH v2 10/10] drm/msm/dpu: Add support for Kaanapali DPU yuanjie yang
2025-11-25 18:24 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251125064758.7207-9-yuanjie.yang@oss.qualcomm.com \
--to=yuanjie.yang@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=aiqun.yu@oss.qualcomm.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lumag@kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_khsieh@quicinc.com \
--cc=quic_mkrishn@quicinc.com \
--cc=robh@kernel.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
--cc=tingwei.zhang@oss.qualcomm.com \
--cc=tzimmermann@suse.de \
--cc=yongxing.mou@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®