[PATCH v7 0/2] arm64: dts: qcom: Add qcs6490-rubikpi3 board dts

[Hongyang Zhao <hongyang.zhao@thundersoft.com>]

RUBIK Pi 3 (https://rubikpi.ai/), a lightweight development board based on
Qualcomm Dragonwing™ QCS6490 platform, is the first Pi built on Qualcomm
AI platforms for developers.

This commit enables the following features:
    Works:
    - Bluetooth (AP6256)
    - Wi-Fi (AP6256)
    - Ethernet (AX88179B connected to UPD720201)
    - Two USB Type-A 3.0 ports (UPD720201 connected to PCIe0)
    - USB Type-A 2.0 port
    - USB Type-C
    - M.2 M-Key 2280 PCIe 3.0
    - FAN
    - RTC
    - 40PIN: I2C x1, UART x1

Signed-off-by: Hongyang Zhao <hongyang.zhao@thundersoft.com>
---
Changes in v7:
- Revert the changes made to PCIe1 in version V6.
- Change the ADSP firmware path to `qcom/qcs6490/Thundercomm/RubikPi3/adsp.mbn`.
- Link to v6: https://lore.kernel.org/all/20251115-rubikpi-next-20251114-v1-0-fc630dc5bb5d@thundersoft.com/

Changes in v6:
- Fix device tree formatting issues.
- Add firmware-name to QUPv3 nodes.
- An "Internal error: synchronous external abort" error occurred while
  executing the `qcom_pcie_clear_hpc` function in the PCIe1 RC. The following
  changes were rolled back(overriding the configuration in `kodiak.dtsi`):
  03e928442d46 arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature
- Replace the three monochrome LEDs with multicolor LEDs.
- The drive-strength value of the pins is modified uniformly.
- Link to v5: https://lore.kernel.org/linux-arm-msm/20251025122724.633766-1-hongyang.zhao@thundersoft.com/

Changes in v5:
- Fix device tree formatting issues.
- Add fan control that follows CPU0 temperature.
- Link to v4: https://lore.kernel.org/linux-arm-msm/20250930043258.249641-1-hongyang.zhao@thundersoft.com/

Changes in v4:
- Enable PCIe0 node.
- Added AX88179B Ethernet and UPD720201 USBHUB power control.
- Delete the nodes and attributes defined in sc7280.dtsi.
- Modify qcom.yaml to add binding for the Thundercomm RUBIK Pi 3 board.
- Link to v3: https://lore.kernel.org/linux-arm-msm/20250924161120.27051-1-hongyang.zhao@thundersoft.com/

Changes in v3:
- Rebase on linux-next/master.
- Link to v2: https://lore.kernel.org/linux-arm-msm/20250924121541.128582-1-hongyang.zhao@thundersoft.com/

Changes in v2:
- Fix problems found when running device tree check.
- Enable USB2.0 interface.
- Link to v1: https://lore.kernel.org/linux-arm-msm/20250923064330.518784-1-hongyang.zhao@thundersoft.com/
---

---
Hongyang Zhao (2):
      dt-bindings: arm: qcom: Add Thundercomm RUBIK Pi 3
      arm64: dts: qcom: Add qcs6490-rubikpi3 board dts

 Documentation/devicetree/bindings/arm/qcom.yaml    |    1 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 .../boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 1410 ++++++++++++++++++++
 3 files changed, 1412 insertions(+)
---
base-commit: 92fd6e84175befa1775e5c0ab682938eca27c0b2
change-id: 20251125-rubikpi-next-20251125-1f2fb36d8917

Best regards,
--  
Hongyang Zhao <hongyang.zhao@thundersoft.com>