Re: [GIT PULL] LEDs for v6.19

[Lee Jones <lee@kernel.org>]

echo ${SUBJECT} | s/Backlight/Leds/

Apologies.

> Good evening Linus,
> 
> The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:
> 
>   Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds.git tags/leds-next-6.19
> 
> for you to fetch changes up to 072cd5f458d76b9e15d89ebdaea8b5cb1312eeef:
> 
>   leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM (2025-11-20 15:25:19 +0000)
> 
> ----------------------------------------------------------------
> LEDS for v6.19
> 
>   * Add optional GPIO enable pin support to PWM LED driver.
> 
>   * Allow LED module 0 to be added to module bank in lp50xx driver.
>   * Fix upboard LED driver module alias to ensure proper auto-loading.
>   * Update LP5009 to support 3 modules for a total of 9 LEDs.
>   * Skip LEDs without color components in cros_ec driver instead of failing probe.
>   * Fix GPIO descriptor leaks in netxbig error paths by releasing acquired GPIOs.
>   * Allow LED_COLOR_ID_MULTI in qcom-lpg driver for greater flexibility.
>   * Enable LP55XX common LED use without FW_LOADER_USER_HELPER.
>   * Ensure lp50xx chip is enabled before any I2C communication.
> 
>   * Use fwnode_for_each_child_node() instead of fwnode_for_each_available_child_node()
>     in LED drivers.
>   * Use device_get_next_child_node() instead of fwnode_get_next_available_child_node()
>     in LED flash drivers.
>   * Replace sprintf() with sysfs_emit() in sysfs show functions for improved
>     bounds checking.
>   * Replace system_wq() with system_percpu_wq() in the input event trigger.
>   * Reorder include files to alphabetic order in the PWM LED driver.
>   * Do not enable TRILED in qcom-lpg when configuring PWM.
>   * Drop duplicate LEDS_EXPRESSWIRE config from Kconfig.
> 
>   * Remove arcxcnn_bl.txt Device Tree binding documentation.
> 
>   * Convert ArcticSand arc2c0608 LED driver binding to DT Schema.
>   * Add default-brightness property to common LED binding.
>   * Add enable-gpios property to PWM LED binding.
>   * Add PM7550 to qcom,spmi-flash-led compatible.
>   * Explain standalone PWM usage in qcom-lpg binding.
> 
> ----------------------------------------------------------------
> Christian Hitz (3):
>       leds: leds-lp50xx: Allow LED 0 to be added to module bank
>       leds: leds-lp50xx: LP5009 supports 3 modules for a total of 9 LEDs
>       leds: leds-lp50xx: Enable chip before any communication
> 
> Duje Mihanović (1):
>       leds: Drop duplicate LEDS_EXPRESSWIRE config
> 
> Fenglin Wu (2):
>       dt-bindings: leds: qcom-lpg: Explain standalone PWM usage
>       leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM
> 
> Haotian Zhang (1):
>       leds: netxbig: Fix GPIO descriptor leak in error paths
> 
> Harrison Carter (1):
>       dt-bindings: leds: arc,arc2c0608: Convert to DT Schema
> 
> Jean-François Lessard (1):
>       dt-bindings: leds: Add default-brightness property to common.yaml
> 
> Konrad Dybcio (1):
>       leds: rgb: leds-qcom-lpg: Allow LED_COLOR_ID_MULTI
> 
> LI Qingwu (3):
>       dt-bindings: leds: pwm: Add enable-gpios property
>       leds: pwm: Add optional GPIO enable pin support
>       leds: pwm: Reorder include files to alphabetic order
> 
> Luca Weiss (1):
>       dt-bindings: leds: qcom,spmi-flash-led: Add PM7550
> 
> Marco Crivellari (1):
>       leds: trigger: Replace use of system_wq() with system_percpu_wq()
> 
> Sakari Ailus (2):
>       leds: Use fwnode_for_each_child_node() instead
>       leds: flash: Use fwnode_get_next_child_node() instead
> 
> Sicelo A. Mhlongo (1):
>       leds: lp55xx_common: Enable use without FW_LOADER_USER_HELPER
> 
> Thomas Richard (1):
>       leds: upboard: Fix module alias
> 
> Thomas Weißschuh (1):
>       leds: leds-cros_ec: Skip LEDs without color components
> 
> Thorsten Blum (1):
>       leds: led-class: Replace sprintf() with sysfs_emit() in sysfs show functions
> 
>  .../bindings/leds/backlight/arc,arc2c0608.yaml     | 108 +++++++++++++++++++++
>  .../bindings/leds/backlight/arcxcnn_bl.txt         |  33 -------
>  Documentation/devicetree/bindings/leds/common.yaml |   6 ++
>  .../devicetree/bindings/leds/leds-pwm.yaml         |   7 ++
>  .../devicetree/bindings/leds/leds-qcom-lpg.yaml    |   5 +
>  .../bindings/leds/qcom,spmi-flash-led.yaml         |   1 +
>  Documentation/leds/leds-lp5521.rst                 |   2 +-
>  Documentation/leds/leds-lp5523.rst                 |   2 +-
>  drivers/leds/Kconfig                               |   8 +-
>  drivers/leds/flash/leds-rt4505.c                   |   2 +-
>  drivers/leds/flash/leds-rt8515.c                   |   2 +-
>  drivers/leds/flash/leds-sgm3140.c                  |   3 +-
>  drivers/leds/flash/leds-tps6131x.c                 |   2 +-
>  drivers/leds/led-class.c                           |   6 +-
>  drivers/leds/leds-cros_ec.c                        |   5 +-
>  drivers/leds/leds-lp50xx.c                         |  67 ++++++++-----
>  drivers/leds/leds-max5970.c                        |   2 +-
>  drivers/leds/leds-max77705.c                       |   2 +-
>  drivers/leds/leds-netxbig.c                        |  36 +++++--
>  drivers/leds/leds-pwm.c                            |  27 +++++-
>  drivers/leds/leds-upboard.c                        |   2 +-
>  drivers/leds/rgb/leds-ktd202x.c                    |   4 +-
>  drivers/leds/rgb/leds-ncp5623.c                    |   2 +-
>  drivers/leds/rgb/leds-qcom-lpg.c                   |  10 +-
>  drivers/leds/trigger/ledtrig-input-events.c        |   2 +-
>  25 files changed, 245 insertions(+), 101 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml
>  delete mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> 
> -- 
> Lee Jones [李琼斯]

-- 
Lee Jones [李琼斯]